Labeling machine equipment failure
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 2 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 58 % der Verlustzeit der Linie. Berichtet von 8 der 85 Studien, die sie beobachten konnten (gute Evidenz).
Was passiert
A mechanical, electrical, pneumatic or sensor component of the labeling station degrades or breaks (label dispensing head, reel drive, glue/print unit, photocell, applicator pad, or container-guide alignment), so the machine can no longer apply, align or print labels correctly and stops or runs with defects until a technician intervenes. The same failure mode also produces secondary effects such as label jams, misalignment, wasted labels and container tailback on the infeed conveyor.
Was man dagegen tut
Implement condition-based and preventive maintenance on dispensing heads, drive belts, sensors and applicator components, with spare-part kits available to shorten repair time. Standardize fault diagnostics and operator response procedures, and track recurring fault codes to drive root-cause corrective actions and design improvements.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 2,0 % [0,6–4,7 %]
- Erwarteter Anteil an der Verlustzeit
- 1,2 % [0,4–2,8 %]
- Anteil an der Verlustzeit bei Auftreten
- 58 % [49–67 %]
- Studien / Einheiten
- 85 / 113
- Evidenzgrad
- B
Grad B: 5 bis 9 Studien oder eine Intervallbreite zwischen 0,20 und 0,35.
2Wahrscheinlichkeit nach Segment
- Milchprodukte2,0 % [0,3–6,1 %]11 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte6,8 % [2,3–14,1 %]29 Studien
- Bier, Wein und Spirituosen2,0 % [0,3–5,7 %]13 Studien
- Backwaren und Teigwaren2,4 % [0,3–7,9 %]1 Studie
- Fleisch, Geflügel und Fisch2,2 % [0,3–6,9 %]4 Studien
- Obst- und Gemüseverarbeitung2,3 % [0,3–7,3 %]4 Studien
- Getreide- und Ölsaatenmüllerei2,3 % [0,3–7,4 %]3 Studien
- Zucker und Süßwaren2,2 % [0,3–7,4 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel2,2 % [0,3–6,8 %]4 Studien
- Futtermittel und Heimtiernahrung2,3 % [0,3–7,3 %]4 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)2,2 % [0,3–6,7 %]9 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseA mechanical, electrical, pneumatic or sensor component of the labeling station degrades or breaks (label dispensing head, reel drive, glue/print unit, photocell, applicator pad, or container-guide alignment), so the machine can no longer apply, align or print labels correctly and stops or runs with defects until a technician intervenes. The same failure mode also produces secondary effects such as label jams, misalignment, wasted labels and container tailback on the infeed conveyor.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA/MES logs show the labeler state changing to fault or stopped with equipment-related alarm codes (dispensing error, print head error, photocell fault, servo/drive fault), accompanied by rising stop counters and maintenance work-order flags. Upstream or downstream machine states often shift to blocked or starved while the labeler is down, and label-waste or reject counters increase around the fault events.
Gegenmaßnahme
Ingenieurpraktische HinweiseImplement condition-based and preventive maintenance on dispensing heads, drive belts, sensors and applicator components, with spare-part kits available to shorten repair time. Standardize fault diagnostics and operator response procedures, and track recurring fault codes to drive root-cause corrective actions and design improvements.
4Quellen
- Anzahl der Ereignisse: 10,0 events · laut Bericht: “Yazıcı”
Wörtliches Zitat anzeigen
YAZICI | Yazıcı | 10
- Anzahl der Ereignisse: 9,00 events · laut Bericht: “Yazıcı”
Wörtliches Zitat anzeigen
YAZICI | Yazıcı | 9
- Failure data analysis for preventive maintenance scheduling of a bottling company production system (2021)Quelle öffnenAnzahl der Ereignisse: 40,0 events · laut Bericht: “Lb”
Wörtliches Zitat anzeigen
Lb Lv Lc La Others Lf Lg 0 10 20 30 40 50 60 70 80 90 20% 40% 60% 80% 100% 40 17 12 8 6 2 1
- Failure data analysis for preventive maintenance scheduling of a bottling company production system (2021)Quelle öffnenAnzahl der Ereignisse: 17,0 events · laut Bericht: “Lv”
Wörtliches Zitat anzeigen
Lb Lv Lc La Others Lf Lg 0 10 20 30 40 50 60 70 80 90 20% 40% 60% 80% 100% 40 17 12 8 6 2 1
- Failure data analysis for preventive maintenance scheduling of a bottling company production system (2021)Quelle öffnenAnzahl der Ereignisse: 12,0 events · laut Bericht: “Lc”
Wörtliches Zitat anzeigen
Lb Lv Lc La Others Lf Lg 0 10 20 30 40 50 60 70 80 90 20% 40% 60% 80% 100% 40 17 12 8 6 2 1
- Failure data analysis for preventive maintenance scheduling of a bottling company production system (2021)Quelle öffnenAnzahl der Ereignisse: 8,00 events · laut Bericht: “La”
Wörtliches Zitat anzeigen
Lb Lv Lc La Others Lf Lg 0 10 20 30 40 50 60 70 80 90 20% 40% 60% 80% 100% 40 17 12 8 6 2 1
- Failure data analysis for preventive maintenance scheduling of a bottling company production system (2021)Quelle öffnenAnzahl der Ereignisse: 6,00 events · laut Bericht: “Others”
Wörtliches Zitat anzeigen
Lb Lv Lc La Others Lf Lg 0 10 20 30 40 50 60 70 80 90 20% 40% 60% 80% 100% 40 17 12 8 6 2 1
- Failure data analysis for preventive maintenance scheduling of a bottling company production system (2021)Quelle öffnenAnzahl der Ereignisse: 2,00 events · laut Bericht: “Lf”
Wörtliches Zitat anzeigen
Lb Lv Lc La Others Lf Lg 0 10 20 30 40 50 60 70 80 90 20% 40% 60% 80% 100% 40 17 12 8 6 2 1
- Failure data analysis for preventive maintenance scheduling of a bottling company production system (2021)Quelle öffnenAnzahl der Ereignisse: 1,00 events · laut Bericht: “Lg”
Wörtliches Zitat anzeigen
Lb Lv Lc La Others Lf Lg 0 10 20 30 40 50 60 70 80 90 20% 40% 60% 80% 100% 40 17 12 8 6 2 1
- Spezifischer Energiebedarf: 582 Wh/1000 Bottles · laut Bericht: “Production”
Wörtliches Zitat anzeigen
Production 119 4290.2 117 212.8 121 581.6
- Verlustzeit: 3,50 h · laut Bericht: “Prepared”
Wörtliches Zitat anzeigen
Prepared 4.6 12.4 5.2 8.1 3.5 3.3
- Spezifischer Energiebedarf: 3,30 Wh/1000 Bottles · laut Bericht: “Prepared”
Wörtliches Zitat anzeigen
Prepared 4.6 12.4 5.2 8.1 3.5 3.3
- Verlustzeit: 4,60 h · laut Bericht: “Lack”
Wörtliches Zitat anzeigen
Lack 0.1 1.3 0.0 0.0 4.6 4.4
- Spezifischer Energiebedarf: 4,40 Wh/1000 Bottles · laut Bericht: “Lack”
Wörtliches Zitat anzeigen
Lack 0.1 1.3 0.0 0.0 4.6 4.4
- Verlustzeit: 4,80 h · laut Bericht: “Tailback”
Wörtliches Zitat anzeigen
Tailback 6.8 145.8 7.8 9.9 4.8 4.6
- Spezifischer Energiebedarf: 4,60 Wh/1000 Bottles · laut Bericht: “Tailback”
Wörtliches Zitat anzeigen
Tailback 6.8 145.8 7.8 9.9 4.8 4.6
- Verlustzeit: 2,50 h · laut Bericht: “Equipment failure”
Wörtliches Zitat anzeigen
Equipment failure 8.1 195.6 4.9 6.5 2.5 2.2
- Spezifischer Energiebedarf: 2,20 Wh/1000 Bottles · laut Bericht: “Equipment failure”
Wörtliches Zitat anzeigen
Equipment failure 8.1 195.6 4.9 6.5 2.5 2.2
- Verlustzeit: 31,7 h · laut Bericht: “Held”
Wörtliches Zitat anzeigen
Held 29.2 48.7 33 37.4 31.7 25.2
- Spezifischer Energiebedarf: 25,2 Wh/1000 Bottles · laut Bericht: “Held”
Wörtliches Zitat anzeigen
Held 29.2 48.7 33 37.4 31.7 25.2
- Spezifischer Energiebedarf: 621 Wh/1000 Bottles · laut Bericht: “Total”
Wörtliches Zitat anzeigen
Total 4694.0 274.8 621.2
- Enhancing Production Efficiency and Quality in the Carbonated Beverage Industry: A Lean Manufacturing Approach (2024)Quelle öffnenAnzahl der Ereignisse: 330 labels/month · laut Bericht: “Wasted labels”
Wörtliches Zitat anzeigen
Wasted labels (labels/month) 780 330 -57.69%
- Enhancing Production Efficiency and Quality in the Carbonated Beverage Industry: A Lean Manufacturing Approach (2024)Quelle öffnenAnzahl der Ereignisse: 780 labels/month · laut Bericht: “Wasted labels”
Wörtliches Zitat anzeigen
Wasted labels (labels/month) 780 330 -57.69%
- Analisa Efektifitas Mesin Palletizer Menggunakan Metode OEE Dan Identifikasi Kegagalan Dengan FMEA (2025)Quelle öffnenVerlustzeit: 40,0 min · laut Bericht: “Label”
Wörtliches Zitat anzeigen
2 Label 40 12%
- Analisa Efektifitas Mesin Palletizer Menggunakan Metode OEE Dan Identifikasi Kegagalan Dengan FMEA (2025)Quelle öffnenAnteil an der Verlustzeit: 12,0 % · laut Bericht: “Label”
Wörtliches Zitat anzeigen
2 Label 40 12%
- Verlustzeit: 0 min · laut Bericht: “Planned losses”
Wörtliches Zitat anzeigen
Planned losses (min) 0 160 0 0 0 160 7
- Verlustzeit: 106 min · laut Bericht: “Operational losses”
Wörtliches Zitat anzeigen
Operational losses (min) 278 494 106 53 157 1088 48
- Verlustzeit: 24,0 min · laut Bericht: “Equipment losses”
Wörtliches Zitat anzeigen
Equipment losses (min) 420 364 24 55 152 1015 44.8
- Verlustzeit: 130 min · laut Bericht: “Total Losses”
Wörtliches Zitat anzeigen
Total Losses(min) 698 1018 130 108 309 2263
- Anteil an der Verlustzeit: 5,80 % · laut Bericht: “Total Losses”
Wörtliches Zitat anzeigen
% of Losses 30.8 45 5.8 4.8 13.7
- Verlustzeit: 106 min · laut Bericht: “Labeller”
Wörtliches Zitat anzeigen
Operational losses (min) | 278 | 494 | 106 | 53 | 157 | 1088 | 48
- Verlustzeit: 24,0 min · laut Bericht: “Labeller”
Wörtliches Zitat anzeigen
Equipment losses (min) | 420 | 364 | 24 | 55 | 152 | 1015 | 44.8
- COMPARATIVE ANALYSIS OF PRODUCTION LINE EFFICIENCY UNDER VARYING DEMAND SCENARIOS USING MULTILAYER PERCEPTRON (2026)Quelle öffnenVerlustzeit: 2,50 hrs · laut Bericht: “Labeling Misalignment”
Wörtliches Zitat anzeigen
3 Sprite 50cl PET 24 18,500 17,200 2.5 Labeling Misalignment 89.5 Changeover delay

