Line imbalance stop (starvation/blocking)
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 54 % der Verlustzeit der Linie. Berichtet von 1 der 76 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
The stretch-blow molder is automatically paused by its control system either because upstream supply of preforms or compressed air is temporarily lacking (starvation) or because downstream conveying or packaging equipment cannot accept output and a tailback forms (blocking). The generic state labels recorded by the line SCADA (held, lack, tailback, prepared, production) reflect transitions between running, waiting-for-material, waiting-for-space and changeover states rather than a single mechanical failure.
Was man dagegen tut
Size and manage buffer accumulation (conveyors, surge bins) between the molder and adjacent stations to absorb short-term rate mismatches, synchronize line speeds, and tune sensors that trigger lack/tailback states to avoid nuisance stops. Review changeover and preparation procedures separately from these line-balance states so causes are not conflated in reporting.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,6 % [0,1–1,8 %]
- Erwarteter Anteil an der Verlustzeit
- 0,3 % [0,1–1,0 %]
- Anteil an der Verlustzeit bei Auftreten
- 54 % [42–65 %]
- Studien / Einheiten
- 76 / 96
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,8 % [0,1–3,2 %]5 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte1,0 % [0,1–3,8 %]11 Studien
- Bier, Wein und Spirituosen0,8 % [0,1–3,3 %]0 Studien
- Backwaren und Teigwaren0,7 % [0,1–2,4 %]25 Studien
- Fleisch, Geflügel und Fisch0,8 % [0,1–3,0 %]3 Studien
- Obst- und Gemüseverarbeitung0,8 % [0,1–3,0 %]3 Studien
- Getreide- und Ölsaatenmüllerei0,8 % [0,1–3,5 %]0 Studien
- Zucker und Süßwaren0,7 % [0,1–2,6 %]8 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,7 % [0,1–2,7 %]7 Studien
- Futtermittel und Heimtiernahrung0,8 % [0,1–2,9 %]6 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,8 % [0,1–2,8 %]8 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe stretch-blow molder is automatically paused by its control system either because upstream supply of preforms or compressed air is temporarily lacking (starvation) or because downstream conveying or packaging equipment cannot accept output and a tailback forms (blocking). The generic state labels recorded by the line SCADA (held, lack, tailback, prepared, production) reflect transitions between running, waiting-for-material, waiting-for-space and changeover states rather than a single mechanical failure.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseFrequent, short-duration state changes alternating between running and non-running states labeled as lack-of-material or tailback, often correlated with starved/blocked states of adjacent upstream or downstream machines in the line topology; occasional longer events are tagged as held, prepared or equipment failure depending on cause. Total runtime counters show the sum of these intermittent stops without a specific fault code.
Gegenmaßnahme
Ingenieurpraktische HinweiseSize and manage buffer accumulation (conveyors, surge bins) between the molder and adjacent stations to absorb short-term rate mismatches, synchronize line speeds, and tune sensors that trigger lack/tailback states to avoid nuisance stops. Review changeover and preparation procedures separately from these line-balance states so causes are not conflated in reporting.
4Quellen
- Spezifischer Energiebedarf: 4.290 Wh/1000 Bottles · laut Bericht: “Production”
Wörtliches Zitat anzeigen
Production 119 4290.2 117 212.8 121 581.6
- Verlustzeit: 4,60 h · laut Bericht: “Prepared”
Wörtliches Zitat anzeigen
Prepared 4.6 12.4 5.2 8.1 3.5 3.3
- Spezifischer Energiebedarf: 12,4 Wh/1000 Bottles · laut Bericht: “Prepared”
Wörtliches Zitat anzeigen
Prepared 4.6 12.4 5.2 8.1 3.5 3.3
- Verlustzeit: 0,100 h · laut Bericht: “Lack”
Wörtliches Zitat anzeigen
Lack 0.1 1.3 0.0 0.0 4.6 4.4
- Spezifischer Energiebedarf: 1,30 Wh/1000 Bottles · laut Bericht: “Lack”
Wörtliches Zitat anzeigen
Lack 0.1 1.3 0.0 0.0 4.6 4.4
- Verlustzeit: 6,80 h · laut Bericht: “Tailback”
Wörtliches Zitat anzeigen
Tailback 6.8 145.8 7.8 9.9 4.8 4.6
- Spezifischer Energiebedarf: 146 Wh/1000 Bottles · laut Bericht: “Tailback”
Wörtliches Zitat anzeigen
Tailback 6.8 145.8 7.8 9.9 4.8 4.6
- Verlustzeit: 8,10 h · laut Bericht: “Equipment failure”
Wörtliches Zitat anzeigen
Equipment failure 8.1 195.6 4.9 6.5 2.5 2.2
- Spezifischer Energiebedarf: 196 Wh/1000 Bottles · laut Bericht: “Equipment failure”
Wörtliches Zitat anzeigen
Equipment failure 8.1 195.6 4.9 6.5 2.5 2.2
- Verlustzeit: 29,2 h · laut Bericht: “Held”
Wörtliches Zitat anzeigen
Held 29.2 48.7 33 37.4 31.7 25.2
- Spezifischer Energiebedarf: 48,7 Wh/1000 Bottles · laut Bericht: “Held”
Wörtliches Zitat anzeigen
Held 29.2 48.7 33 37.4 31.7 25.2
- Spezifischer Energiebedarf: 4.694 Wh/1000 Bottles · laut Bericht: “Total”
Wörtliches Zitat anzeigen
Total 4694.0 274.8 621.2

