Waiting time due to line imbalance at cutting station
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 53 % der Verlustzeit der Linie. Berichtet von 1 der 39 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
The cutting machine or operator stands idle because upstream equipment fails to supply material in time or downstream equipment cannot accept cut product, creating starvation or blocking at the station. These short waits accumulate from minor pacing mismatches between the cutting step and adjacent operations rather than from an equipment fault.
Was man dagegen tut
Balance line speeds and buffer capacities between the cutting step and its neighboring operations, and size intermediate accumulation to absorb normal rate variability. Operators are trained to clear the pacing bottleneck quickly, and longer-term fixes include re-sequencing or adding buffer conveyors to decouple the stations.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,9 % [0,1–2,7 %]
- Erwarteter Anteil an der Verlustzeit
- 0,5 % [0,1–1,4 %]
- Anteil an der Verlustzeit bei Auftreten
- 53 % [41–66 %]
- Studien / Einheiten
- 39 / 48
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte1,0 % [0,1–3,8 %]5 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte1,0 % [0,1–4,0 %]1 Studie
- Bier, Wein und Spirituosen1,0 % [0,1–4,1 %]0 Studien
- Backwaren und Teigwaren1,0 % [0,1–4,4 %]0 Studien
- Fleisch, Geflügel und Fisch1,4 % [0,1–5,5 %]5 Studien
- Obst- und Gemüseverarbeitung1,0 % [0,1–3,9 %]6 Studien
- Getreide- und Ölsaatenmüllerei1,0 % [0,1–4,2 %]3 Studien
- Zucker und Süßwaren1,0 % [0,1–3,9 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel1,0 % [0,1–3,9 %]3 Studien
- Futtermittel und Heimtiernahrung1,0 % [0,1–4,0 %]5 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)1,0 % [0,1–3,8 %]8 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe cutting machine or operator stands idle because upstream equipment fails to supply material in time or downstream equipment cannot accept cut product, creating starvation or blocking at the station. These short waits accumulate from minor pacing mismatches between the cutting step and adjacent operations rather than from an equipment fault.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseMES/SCADA logs show the cutting machine in an idle or standby state with no fault alarm active, while upstream or downstream machine states register starved or blocked conditions during the same interval. Cycle counters stay flat and the stop duration is typically short and repetitive across the shift.
Gegenmaßnahme
Ingenieurpraktische HinweiseBalance line speeds and buffer capacities between the cutting step and its neighboring operations, and size intermediate accumulation to absorb normal rate variability. Operators are trained to clear the pacing bottleneck quickly, and longer-term fixes include re-sequencing or adding buffer conveyors to decouple the stations.
4Quellen
- The research on investigation of factors affecting the production process on cattle slaughtering line ina private sector slaughterhouse (2010)Quelle öffnenVerlustzeit: 1.256 s · laut Bericht: “waiting time”
Wörtliches Zitat anzeigen
The total cutting line operations of 49 cattle, the total cutting line process, the waiting time of each cattle in the line and the total process in the slaughterhouse were determined as 3006.1, 1750.1 and 1256.0 seconds respectively.
- The research on investigation of factors affecting the production process on cattle slaughtering line ina private sector slaughterhouse (2010)Quelle öffnenAnteil an der Verlustzeit: 58,2 % · laut Bericht: “waiting time”
Wörtliches Zitat anzeigen
In the process of total cutting line, the share of waiting time in the slaughtering line is 58.2%.

