Maintenance Program Downtime (Planned and Reactive)
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 2 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 5 der 127 Studien, die sie beobachten konnten (gute Evidenz).
Was passiert
Production stops occur because equipment or civil structures are taken out of service for scheduled preventive or condition-based maintenance tasks, or unexpectedly for reactive repairs when the maintenance strategy fails to anticipate a failure. Coordination activities such as maintenance planning meetings also occupy line time without producing output. The underlying driver is the plant's overall maintenance policy, which determines the split between planned interventions and unplanned, failure-driven stops.
Was man dagegen tut
Strengthen the maintenance strategy by shifting the balance from reactive repair toward preventive and condition-based maintenance, and plan maintenance windows, meetings and civil works to minimize their impact on scheduled production. Track maintenance KPIs such as planned versus unplanned downtime ratios to continuously refine the maintenance management program.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 1,6 % [0,5–3,6 %]
- Erwarteter Anteil an der Verlustzeit
- 0,9 % [0,3–2,0 %]
- Anteil an der Verlustzeit bei Auftreten
- 57 % [46–67 %]
- Studien / Einheiten
- 127 / 161
- Evidenzgrad
- B
Grad B: 5 bis 9 Studien oder eine Intervallbreite zwischen 0,20 und 0,35.
2Wahrscheinlichkeit nach Segment
- Milchprodukte1,7 % [0,3–5,3 %]13 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte1,8 % [0,3–5,1 %]26 Studien
- Bier, Wein und Spirituosen2,3 % [0,4–6,9 %]11 Studien
- Backwaren und Teigwaren1,4 % [0,2–4,1 %]24 Studien
- Fleisch, Geflügel und Fisch1,7 % [0,3–5,5 %]9 Studien
- Obst- und Gemüseverarbeitung1,7 % [0,3–5,3 %]7 Studien
- Getreide- und Ölsaatenmüllerei1,7 % [0,3–5,5 %]6 Studien
- Zucker und Süßwaren2,3 % [0,4–7,3 %]9 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel1,7 % [0,3–5,5 %]5 Studien
- Futtermittel und Heimtiernahrung2,4 % [0,4–7,5 %]7 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)2,4 % [0,4–8,0 %]10 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseProduction stops occur because equipment or civil structures are taken out of service for scheduled preventive or condition-based maintenance tasks, or unexpectedly for reactive repairs when the maintenance strategy fails to anticipate a failure. Coordination activities such as maintenance planning meetings also occupy line time without producing output. The underlying driver is the plant's overall maintenance policy, which determines the split between planned interventions and unplanned, failure-driven stops.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA/MES logs show machine-state transitions to maintenance or stopped states tagged with work-order, PM-code or meeting references, with a mix of short recurring scheduled blocks and longer irregular reactive events. Stop reason codes point to maintenance activities or administrative coordination rather than to a specific component failure mode, and downtime clusters around maintenance calendars or condition-monitoring alerts.
Gegenmaßnahme
Ingenieurpraktische HinweiseStrengthen the maintenance strategy by shifting the balance from reactive repair toward preventive and condition-based maintenance, and plan maintenance windows, meetings and civil works to minimize their impact on scheduled production. Track maintenance KPIs such as planned versus unplanned downtime ratios to continuously refine the maintenance management program.
4Quellen
- Penerapan Total Productive Maintenance (TPM) Pada Pabrik Gula Rafinasi di Indonesia (Studi Kasus: PT. XYZ) (2019)Quelle öffnenMittlere Ereignisdauer: 13,6 jam · laut Bericht: “condition based maintenance (PM02)”
Wörtliches Zitat anzeigen
Kegiatan PM 02 memerlukan waktu rata-rata 13,6 jam.
- Implementation of Computerized Maintenance and Management System in Wine Factory in Ethiopia: A Case Study (2020)Quelle öffnenAnteil an der Verlustzeit: 27,0 % · laut Bericht: “maintenance strategy followed by the plant”
Wörtliches Zitat anzeigen
the main causes of the losses in production are stated as mechanical failure in washing section which covers the largest portion (35%), maintenance strategy followed by the plant (27%), maintenance management program (25%), and high cost of maintenance inventory control, and other (13%).
- Implementation of Computerized Maintenance and Management System in Wine Factory in Ethiopia: A Case Study (2020)Quelle öffnenAnteil an der Verlustzeit: 25,0 % · laut Bericht: “maintenance management program”
Wörtliches Zitat anzeigen
the main causes of the losses in production are stated as mechanical failure in washing section which covers the largest portion (35%), maintenance strategy followed by the plant (27%), maintenance management program (25%), and high cost of maintenance inventory control, and other (13%).
- Strategic formulation of industrial maintenance based on equipment reliability in a sugar and ethanol production plant (2020)Quelle öffnenZeit zwischen Ereignissen: 7,53 log(min) · laut Bericht: “Civil Maintenance”
Wörtliches Zitat anzeigen
Civil Maintenance 2 7.534 (5.100; 9.969)
- Maintenance Performance Evaluation and Downtime Analysis of Manufacturing Equipment in a Food Manufacturing Company (2021)Quelle öffnenVerlustzeit: 42.723 min · laut Bericht: “Scheduled Maintenance”
Wörtliches Zitat anzeigen
Scheduled Maintenance 42723 40.82 40.82
- Maintenance Performance Evaluation and Downtime Analysis of Manufacturing Equipment in a Food Manufacturing Company (2021)Quelle öffnenAnteil an der Verlustzeit: 40,8 % · laut Bericht: “Scheduled Maintenance”
Wörtliches Zitat anzeigen
Scheduled Maintenance 42723 40.82 40.82
- Maintenance Performance Evaluation and Downtime Analysis of Manufacturing Equipment in a Food Manufacturing Company (2021)Quelle öffnenVerlustzeit: 9.723 min · laut Bericht: “Maintenance job meetings”
Wörtliches Zitat anzeigen
Maintenance job meetings 9723 9.29 93.3
- Maintenance Performance Evaluation and Downtime Analysis of Manufacturing Equipment in a Food Manufacturing Company (2021)Quelle öffnenAnteil an der Verlustzeit: 9,29 % · laut Bericht: “Maintenance job meetings”
Wörtliches Zitat anzeigen
Maintenance job meetings 9723 9.29 93.3
- Production Model to increase OEE through the application of Lean Manufacturing and Total Production Maintenance tools in animal feed manufacturing SMEs (2023)Quelle öffnenAnteil an der Verlustzeit: 50,2 % · laut Bericht: “maintenance problems”
Wörtliches Zitat anzeigen
there is a 50.16% for maintenance problems, which is shown in the graphic it is the cause possessing the highest percentage, affecting more the company performance on the productive part.
- Production Model to increase OEE through the application of Lean Manufacturing and Total Production Maintenance tools in animal feed manufacturing SMEs (2023)Quelle öffnenVerlustzeit: 1.340 h · laut Bericht: “Reactive Maintenance”
Wörtliches Zitat anzeigen
Reactive Maintenance Man-Hours 1340 11,390
- COMPARATIVE ANALYSIS OF PRODUCTION LINE EFFICIENCY UNDER VARYING DEMAND SCENARIOS USING MULTILAYER PERCEPTRON (2026)Quelle öffnenVerlustzeit: 7,00 hrs · laut Bericht: “Routine maintenance”
Wörtliches Zitat anzeigen
Glass Washer Line 5 Routine Maintenance May 7 5.1 2.8 ₦360,000 6.0

