Eingeschlossene Studie
Production Model to increase OEE through the application of Lean Manufacturing and Total Production Maintenance tools in animal feed manufacturing SMEs
1Bibliografische Angaben
- Autoren
- Angelo Paolo Espinoza-Monge, Yibely Alexandra Zenteno-Correa, Juan Carlos Quiroz-Flores, Martin Fidel Collao-Diaz
- Jahr
- 2023
- Publikationsorgan
- International Conference on Industrial Engineering and Operations Management (IEOM)
- Land
- Peru
- Segment
- Futtermittel und Heimtiernahrung
- Prozessfamilie
- Schlachtung, Zerlegung und Primärverarbeitung
- Studientyp
- Einzelfallstudie
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · 4 Maschinen
- Beobachtungszeitraum
- —
- Datenerhebung
- questionnaire
- Intervention
Umfeld laut Studie anzeigen
This scientific article will study the case of a company dedicated to the Production of Feed for Animals that shows problems in the level of its operating performance.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 8Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given. | 1 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance. | 2 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Inconsistencies above 10 percentage points, or OEE factors above 100%. | 0 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—Wörtliches Zitat anzeigen (Table 3)MTTR 3.54 MTBF 4.523 Availability 56.10% | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 4,52 not reported | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Table 3)MTTR 3.54 MTBF 4.523 Availability 56.10% | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 3,54 not reported | Beide Extraktionen übereinstimmend |
crusher clogging due to very large stonescrusherWörtliches Zitat anzeigen (Section 5.1)the crusher clogging due to very large stones represents a lower percentage of 19.88%, which makes visible how this cause affects the indicator. | Leerlauf und Kurzstillstände | Anteil an der Verlustzeit | 19,9 % | Durch Schiedsentscheid |
lack of raw material and suppliesWörtliches Zitat anzeigen (Section 5.1)there is the lack of raw material and supplies, which generates a 29.96% of the low performance because of the poor management of these. | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Anteil an der Verlustzeit | 30,0 % | Beide Extraktionen übereinstimmend |
maintenance problemsWörtliches Zitat anzeigen (Section 5.1)there is a 50.16% for maintenance problems, which is shown in the graphic it is the cause possessing the highest percentage, affecting more the company performance on the productive part. | Anlagenausfall (Störungen) | Anteil an der Verlustzeit | 50,2 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Table 1)Quality > 99% Perfect orders Total orders 𝑥𝑥 100 77,54% Indicator is lower than established goal, requires measures | none | Qualität | 77,5 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Table 1)Performance > 95% Actual monthly production Programmed monthly production 𝑥𝑥 100 68,75% Productivity lower than goal. Requires measures | none | Leistung | 68,8 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Table 1)Availability 90% T. Available −React. Mnt. −Planned Mnt. T. Available −React. Mnt. 𝑥𝑥 100 56.10% Value is too far from the goal, requires measures | none | Verfügbarkeit | 56,1 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Table 1)Overall Equipment Effectiveness 85% Performance 𝑥𝑥 Quality 𝑥𝑥 Availability 29,90% Value reached is too far from the goal set, requires measures | none | OEE | 29,9 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Table 2)Total Annual Production (Tn) 11255 10979 10725 Programmed Annual (Tn) 15200 15400 15600 Performance 74.05% 71.29% 68.75% | none | Leistung | 74,1 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 2)Total Annual Production (Tn) 11255 10979 10725 Programmed Annual (Tn) 15200 15400 15600 Performance 74.05% 71.29% 68.75% | none | Leistung | 71,3 % | Einfache Extraktion |
Reactive MaintenanceWörtliches Zitat anzeigen (Table 4)Reactive Maintenance Man-Hours 1340 11,390 | Anlagenausfall (Störungen) | Verlustzeit | 1.340 h | Einfache Extraktion |
Beobachtungseinheiten
- whole plant · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage

