Metal detector malfunction
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 1 der 120 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
The metal detector unit on the filling line experiences an electrical, sensor or calibration fault (coil drift, false triggering, wiring or control-board failure) that stops it from reliably passing or rejecting product. This forces the line to halt while the detector is inspected, recalibrated or repaired before production can resume.
Was man dagegen tut
Implement scheduled preventive maintenance and sensitivity verification of the metal detector with certified test pieces, keep spare sensor and control boards on hand, and establish a rapid diagnostic and reset procedure so faults are cleared quickly without extended line stoppage.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,5 % [0,1–1,5 %]
- Erwarteter Anteil an der Verlustzeit
- 0,3 % [0,1–0,9 %]
- Anteil an der Verlustzeit bei Auftreten
- 57 % [45–66 %]
- Studien / Einheiten
- 120 / 162
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,6 % [0,1–2,1 %]18 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,7 % [0,1–2,1 %]44 Studien
- Bier, Wein und Spirituosen0,6 % [0,1–2,1 %]16 Studien
- Backwaren und Teigwaren0,7 % [0,1–2,6 %]0 Studien
- Fleisch, Geflügel und Fisch0,6 % [0,1–2,2 %]6 Studien
- Obst- und Gemüseverarbeitung0,7 % [0,1–2,6 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,6 % [0,1–2,3 %]6 Studien
- Zucker und Süßwaren0,7 % [0,1–2,5 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,6 % [0,1–2,5 %]6 Studien
- Futtermittel und Heimtiernahrung0,6 % [0,1–2,4 %]4 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,6 % [0,1–2,4 %]13 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe metal detector unit on the filling line experiences an electrical, sensor or calibration fault (coil drift, false triggering, wiring or control-board failure) that stops it from reliably passing or rejecting product. This forces the line to halt while the detector is inspected, recalibrated or repaired before production can resume.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseMES/SCADA logs show a downstream stop or line-stopped state originating at the metal detector station, often with an associated fault or alarm code, repeated reject/trip events without a confirmed contaminant, or a maintenance/check activity logged against the detector asset. Upstream filling stations show blocking while the detector is offline for diagnosis.
Gegenmaßnahme
Ingenieurpraktische HinweiseImplement scheduled preventive maintenance and sensitivity verification of the metal detector with certified test pieces, keep spare sensor and control boards on hand, and establish a rapid diagnostic and reset procedure so faults are cleared quickly without extended line stoppage.
4Quellen
- Anteil an der Verlustzeit: 9,00 % · laut Bericht: “Falha no detector de metal”
Wörtliches Zitat anzeigen
verificamos que apenas 9 % das paradas na enchedora estavam relacionadas com o detector de metal, sendo assim esta causa-raiz foi descartada por não apresentar significância estatística segundo o critério estabelecido pelo grupo
- Set Up Time Reduction Using Single Minute Exchange of Dies (SMED) and 5S: A Case Study (2021)Quelle öffnenVerlustzeit: 2,00 min · laut Bericht: “Checking Metal Detector”
Wörtliches Zitat anzeigen
Record Counter Metal Detector 0:00:00 0:01:00 0:01:00; Verified positive sample metal detector 0:01:00 0:02:00 0:01:00

