Eingeschlossene Studie
Set Up Time Reduction Using Single Minute Exchange of Dies (SMED) and 5S: A Case Study
1Bibliografische Angaben
- Autoren
- Johan Krisnanto Runtuk
- Jahr
- 2021
- Publikationsorgan
- JIE Scientific Journal on Research and Application of Industrial System
- Land
- —
- Segment
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)
- Prozessfamilie
- Abfüll- und Verpackungslinie
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · 1 Maschinen
- Beobachtungszeitraum
- 92 Tage
- Datenerhebung
- manual_logs
- Intervention
Umfeld laut Studie anzeigen
As one of the foods and beverages industry, PT. MNO also focuses on reducing waste in the production process, especially in the filling department.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 11Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time. | 2 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
setup time or line preparation timefilling machineWörtliches Zitat anzeigen (Section 1, Introduction)The most significant contribution of planned stoppages is 48% comes from setup time or line preparation time. | Rüsten und Einstellen | Anteil an der Verlustzeit | 48,0 % | Einfache Extraktion |
cleaning inspection and lubrication processfilling machineWörtliches Zitat anzeigen (Section 1, Introduction)The next is 34% of cleaning inspection and lubrication process, 19% of operational stoppages, 3% of meals or break, 2% of change over time, and the last 1% of planned maintenance. | Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage) | Anteil an der Verlustzeit | 34,0 % | Einfache Extraktion |
operational stoppagesfilling machineWörtliches Zitat anzeigen (Section 1, Introduction)The next is 34% of cleaning inspection and lubrication process, 19% of operational stoppages, 3% of meals or break, 2% of change over time, and the last 1% of planned maintenance. | Aus dem Bericht nicht klassifizierbar | Anteil an der Verlustzeit | 19,0 % | Einfache Extraktion |
meals or breakfilling machineWörtliches Zitat anzeigen (Section 1, Introduction)The next is 34% of cleaning inspection and lubrication process, 19% of operational stoppages, 3% of meals or break, 2% of change over time, and the last 1% of planned maintenance. | Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage) | Anteil an der Verlustzeit | 3,00 % | Einfache Extraktion |
change over timefilling machineWörtliches Zitat anzeigen (Section 1, Introduction)The next is 34% of cleaning inspection and lubrication process, 19% of operational stoppages, 3% of meals or break, 2% of change over time, and the last 1% of planned maintenance. | Rüsten und Einstellen | Anteil an der Verlustzeit | 2,00 % | Einfache Extraktion |
planned maintenancefilling machineWörtliches Zitat anzeigen (Section 1, Introduction)The next is 34% of cleaning inspection and lubrication process, 19% of operational stoppages, 3% of meals or break, 2% of change over time, and the last 1% of planned maintenance. | Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage) | Anteil an der Verlustzeit | 1,00 % | Einfache Extraktion |
planned stoppagesfilling machineWörtliches Zitat anzeigen (Section 1, Introduction)Based on the whole company manufacturing process, the highest number of waiting waste occurs in filling machines, especially for the planned stoppages with 67% compared with the 33% for the unplanned stoppages. | Aus dem Bericht nicht klassifizierbar | Anteil an der Verlustzeit | 67,0 % | Einfache Extraktion |
unplanned stoppagesfilling machineWörtliches Zitat anzeigen (Section 1, Introduction)Based on the whole company manufacturing process, the highest number of waiting waste occurs in filling machines, especially for the planned stoppages with 67% compared with the 33% for the unplanned stoppages. | Aus dem Bericht nicht klassifizierbar | Anteil an der Verlustzeit | 33,0 % | Einfache Extraktion |
—filling machineWörtliches Zitat anzeigen (Section 3.1, Table 2)The total time needed to conduct the setup activities in the filling machine is 34 minutes, with eight different activities. | Rüsten und Einstellen | Verlustzeit | 34,0 minutes | Einfache Extraktion |
—filling machineWörtliches Zitat anzeigen (Section 3.2)The availability rates from April and June 2016 are 86% and 89%. | none | Verfügbarkeit | 86,0 % | Einfache Extraktion |
—filling machineWörtliches Zitat anzeigen (Section 3.2)The performance rate from May and June 2016 is 88% and 88%. | none | Leistung | 88,0 % | Einfache Extraktion |
—filling machineWörtliches Zitat anzeigen (Section 3.2)The quality rate for the entire month from May and June 2016 is 100%. | none | Qualität | 100 % | Einfache Extraktion |
—filling machineWörtliches Zitat anzeigen (Section 3.2)Then, the OEE rates are 76% and 78% from May until June 2016. | none | OEE | 76,0 % | Einfache Extraktion |
—filling machineWörtliches Zitat anzeigen (Section 3.1, Table 4)Table 4 shows that the setup activities, which means the activities done when the machine stops, are reduced from 13 minutes to 10 minutes. | Rüsten und Einstellen | Verlustzeit | 10,0 minutes | Einfache Extraktion |
—filling machineWörtliches Zitat anzeigen (Section 3.2)The availability rates from April and June 2016 are 86% and 89%. | none | Verfügbarkeit | 89,0 % | Einfache Extraktion |
—filling machineWörtliches Zitat anzeigen (Section 3.2)The performance rate from May and June 2016 is 88% and 88%. | none | Leistung | 88,0 % | Einfache Extraktion |
—filling machineWörtliches Zitat anzeigen (Section 3.2)The quality rate for the entire month from May and June 2016 is 100%. | none | Qualität | 100 % | Einfache Extraktion |
—filling machineWörtliches Zitat anzeigen (Section 3.2)Then, the OEE rates are 76% and 78% from May until June 2016. | none | OEE | 78,0 % | Einfache Extraktion |
Setup timefilling machineWörtliches Zitat anzeigen (Page 5, Section 3.1, SMED and 5S)Before the improvement of Single Minute Exchange of Dies (SMED), the actual setup activities are eight activities in total with 34 minutes to finish the setup activities | Rüsten und Einstellen | Verlustzeit | 34,0 min | Einfache Extraktion |
Checking Metal Detectormetal detectorWörtliches Zitat anzeigen (Table 2, Page 6)Record Counter Metal Detector 0:00:00 0:01:00 0:01:00; Verified positive sample metal detector 0:01:00 0:02:00 0:01:00 | Rüsten und Einstellen | Verlustzeit | 2,00 min | Einfache Extraktion |
Cleaning Environmentfilling machineWörtliches Zitat anzeigen (Table 2, Page 6, Activity group B)Take Cleaning Tools 0:02:00 0:04:00 0:02:00; Cleaning floor below the machine 0:04:00 0:07:00 0:03:00; Tidy Up Cleaning Tools 0:07:00 0:09:00 0:02:00 | Rüsten und Einstellen | Verlustzeit | 7,00 min | Einfache Extraktion |
Cut Open Reworkfilling machineWörtliches Zitat anzeigen (Table 2, Page 6, Activity group G)Cut Open Rework 0:28:00 0:31:00 0:03:00 | Rüsten und Einstellen | Verlustzeit | 3,00 min | Einfache Extraktion |
SHO Updateshift handover documentationWörtliches Zitat anzeigen (Table 2, Page 6, Activity group H)SHO Update 0:31:00 0:34:00 0:03:00 | Rüsten und Einstellen | Verlustzeit | 3,00 min | Einfache Extraktion |
Beobachtungseinheiten
- Filling Machine · Abfüllen · Ausgangslage
- Filling Machine · Abfüllen · Nach der Intervention

