Missing product code/date stamp
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 47 % der Verlustzeit der Linie. Berichtet von 0 der 85 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
The coding device (inkjet, laser or thermal printer) fails to deposit the required batch, date or lot code on the package due to a clogged nozzle, depleted ink or ribbon, a missed trigger signal, or incorrect timing relative to package passage. The affected units proceed through the line without the mandatory code and are classified as non-conforming at inspection, since regulatory and traceability requirements are not met even though the package itself is otherwise acceptable.
Was man dagegen tut
Install an inline print-quality verification camera linked to an automatic reject diverter so that uncoded units are removed before packing, and configure a line interlock that halts the coder or the line when consecutive missing-code events are detected. Maintain the printer through scheduled nozzle cleaning, ink/ribbon level monitoring and preventive replacement of consumables, and validate trigger sensor alignment during changeovers.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,4 % [0,1–1,3 %]
- Erwarteter Anteil an der Verlustzeit
- 0,2 % [0,0–0,6 %]
- Anteil an der Verlustzeit bei Auftreten
- 47 % [35–59 %]
- Studien / Einheiten
- 85 / 113
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,5 % [0,0–1,8 %]11 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,4 % [0,0–1,6 %]29 Studien
- Bier, Wein und Spirituosen0,5 % [0,0–1,9 %]13 Studien
- Backwaren und Teigwaren0,5 % [0,0–2,0 %]1 Studie
- Fleisch, Geflügel und Fisch0,5 % [0,0–1,9 %]4 Studien
- Obst- und Gemüseverarbeitung0,5 % [0,0–2,0 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,5 % [0,0–2,0 %]3 Studien
- Zucker und Süßwaren0,5 % [0,0–1,9 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,5 % [0,0–1,9 %]4 Studien
- Futtermittel und Heimtiernahrung0,5 % [0,0–2,0 %]4 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,5 % [0,0–2,0 %]9 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe coding device (inkjet, laser or thermal printer) fails to deposit the required batch, date or lot code on the package due to a clogged nozzle, depleted ink or ribbon, a missed trigger signal, or incorrect timing relative to package passage. The affected units proceed through the line without the mandatory code and are classified as non-conforming at inspection, since regulatory and traceability requirements are not met even though the package itself is otherwise acceptable.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseVision or code-verification stations log repeated 'no code detected' or 'illegible code' faults, printer fault counters and ink/ribbon-low alarms increase, and the reject counter at the inspection or checkweigher station rises without a corresponding stop in upstream equipment. Printer status tags may show intermittent communication dropouts or missed trigger counts correlated with the defect spikes.
Gegenmaßnahme
Ingenieurpraktische HinweiseInstall an inline print-quality verification camera linked to an automatic reject diverter so that uncoded units are removed before packing, and configure a line interlock that halts the coder or the line when consecutive missing-code events are detected. Maintain the printer through scheduled nozzle cleaning, ink/ribbon level monitoring and preventive replacement of consumables, and validate trigger sensor alignment during changeovers.
4Quellen
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnteil an den Verlustereignissen: 8,80 % · laut Bericht: “Missing coding (koding hilang)”
Wörtliches Zitat anzeigen
Diketahui bahwa kerusakan kemasan pada jenis kemasan melipat sebesar 17.4%, jenis kemasan selip 16.7%, jenis kemasan jepret 15.3%, center seal lekang 10.3%, longseal lekang 9.3%, koding hilang 8.8% kemasan acak 7.7%, seal berkerut 7.4%, ada sambungan 7.0%.
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 30,0 bungkus · laut Bericht: “Missing coding (koding hilang)”
Wörtliches Zitat anzeigen
Koding Hilang 30 85 9 10 71
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 85,0 bungkus · laut Bericht: “Missing coding (koding hilang)”
Wörtliches Zitat anzeigen
Koding Hilang 30 85 9 10 71
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 9,00 bungkus · laut Bericht: “Missing coding (koding hilang)”
Wörtliches Zitat anzeigen
Koding Hilang 30 85 9 10 71
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 10,0 bungkus · laut Bericht: “Missing coding (koding hilang)”
Wörtliches Zitat anzeigen
Koding Hilang 30 85 9 10 71
- Analisis Quality Control Circle (QCC) dan Quality Loss Function (QLF) Dalam Upaya Meminimalkan Tingkat Kerusakan Kemasan (2025)Quelle öffnenAnzahl der Ereignisse: 71,0 bungkus · laut Bericht: “Missing coding (koding hilang)”
Wörtliches Zitat anzeigen
Koding Hilang 30 85 9 10 71

