foratvise
Loslegen
Anlagenausfall (Störungen)

Mixer equipment failure

Anlagenausfall (Störungen)VerfügbarkeitMischen und Vermengen

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 58 % der Verlustzeit der Linie. Berichtet von 1 der 31 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

Unplanned stoppage of the mixer arises from mechanical or electrical degradation of components such as the drive motor, gearbox, agitator shaft, bearings or seals, which lose function under the loads and duty cycles of continuous or batch mixing. The failure forces the mixer out of production until maintenance personnel diagnose and repair the faulty component.

Was man dagegen tut

Typical countermeasures include a preventive and condition-based maintenance program with vibration, temperature and current monitoring on the drive train, scheduled replacement of bearings and seals before end of life, and lubrication and alignment checks. Where criticality justifies it, standby capacity or rapid-swap components reduce the production impact of a failure.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
1,0 % [0,2–3,0 %]
Erwarteter Anteil an der Verlustzeit
0,6 % [0,1–1,7 %]
Anteil an der Verlustzeit bei Auftreten
58 % [47–68 %]
Studien / Einheiten
31 / 40
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    1,2 % [0,1–4,5 %]6 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    1,2 % [0,1–4,8 %]2 Studien
  • Bier, Wein und Spirituosen
    1,2 % [0,1–4,9 %]0 Studien
  • Backwaren und Teigwaren
    1,1 % [0,1–4,0 %]2 Studien
  • Fleisch, Geflügel und Fisch
    1,2 % [0,1–4,8 %]1 Studie
  • Obst- und Gemüseverarbeitung
    1,2 % [0,1–4,6 %]2 Studien
  • Getreide- und Ölsaatenmüllerei
    1,2 % [0,1–5,0 %]0 Studien
  • Zucker und Süßwaren
    1,2 % [0,1–4,6 %]3 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    1,1 % [0,1–4,3 %]3 Studien
  • Futtermittel und Heimtiernahrung
    1,6 % [0,2–6,0 %]5 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    1,1 % [0,1–4,4 %]7 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

Unplanned stoppage of the mixer arises from mechanical or electrical degradation of components such as the drive motor, gearbox, agitator shaft, bearings or seals, which lose function under the loads and duty cycles of continuous or batch mixing. The failure forces the mixer out of production until maintenance personnel diagnose and repair the faulty component.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA/MES data show the mixer transitioning to a fault or stopped machine state with an associated alarm code (overload, overcurrent, high vibration, high temperature or torque deviation), and motor current or torque signals deviating from the normal mixing profile before the trip. Upstream and downstream equipment subsequently show starvation or blocking state durations correlated with the mixer downtime.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Typical countermeasures include a preventive and condition-based maintenance program with vibration, temperature and current monitoring on the drive train, scheduled replacement of bearings and seals before end of life, and lubrication and alignment checks. Where criticality justifies it, standby capacity or rapid-swap components reduce the production impact of a failure.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 0,195 Kg.h-1 · laut Bericht: “Mixing (all products)”
    Wörtliches Zitat anzeigen
    1Mixing 2.50 0.078 ± 0.020 0.195 ± 0.050 Kg 2.43