Packaging line jam or blockage
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 54 % der Verlustzeit der Linie. Berichtet von 1 der 112 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
Containers, cartons, or packaging materials accumulate and jam at a transfer point, guide rail, or infeed/outfeed of a packaging machine due to misalignment, timing mismatch, or an irregular product shape, interrupting the normal flow of units through the equipment.
Was man dagegen tut
Clear the jam, realign guides and sensors, and adjust timing or infeed pressure; implement preventive checks on guide rails, photoeyes, and product spacing to reduce recurrence.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,5 % [0,1–1,5 %]
- Erwarteter Anteil an der Verlustzeit
- 0,3 % [0,1–0,8 %]
- Anteil an der Verlustzeit bei Auftreten
- 54 % [42–66 %]
- Studien / Einheiten
- 112 / 155
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,6 % [0,1–2,3 %]14 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,5 % [0,1–1,7 %]33 Studien
- Bier, Wein und Spirituosen0,6 % [0,1–2,1 %]14 Studien
- Backwaren und Teigwaren0,6 % [0,1–2,5 %]6 Studien
- Fleisch, Geflügel und Fisch0,6 % [0,1–2,1 %]6 Studien
- Obst- und Gemüseverarbeitung0,6 % [0,1–2,4 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,6 % [0,1–2,4 %]4 Studien
- Zucker und Süßwaren0,6 % [0,1–2,4 %]4 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,6 % [0,1–2,4 %]8 Studien
- Futtermittel und Heimtiernahrung0,6 % [0,1–2,3 %]5 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,8 % [0,1–3,1 %]14 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseContainers, cartons, or packaging materials accumulate and jam at a transfer point, guide rail, or infeed/outfeed of a packaging machine due to misalignment, timing mismatch, or an irregular product shape, interrupting the normal flow of units through the equipment.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseShort machine-state transitions to stop or fault status at the packaging station, often with a jam or blockage alarm code, accompanied by a brief rise in upstream accumulation or downstream starvation of the next machine until the operator clears the obstruction.
Gegenmaßnahme
Ingenieurpraktische HinweiseClear the jam, realign guides and sensors, and adjust timing or infeed pressure; implement preventive checks on guide rails, photoeyes, and product spacing to reduce recurrence.
4Quellen
- Anteil an der Verlustzeit: 67,5 % · laut Bericht: “Blockages/Process Failure”
Wörtliches Zitat anzeigen
Blockages/Process Failure 67.46% 63.60% 25.76%
- Anteil an der Verlustzeit: 25,8 % · laut Bericht: “Blockages/Process Failure”
Wörtliches Zitat anzeigen
Blockages/Process Failure 67.46% 63.60% 25.76%

