foratvise
Loslegen
Leerlauf und Kurzstillstände

Pallet Supply Depletion

Leerlauf und KurzstillständeLeistungAbfüllen

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 52 % der Verlustzeit der Linie. Berichtet von 0 der 120 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

The line runs out of empty pallets available for stacking or supporting finished containers, so the filling or downstream accumulation station must halt until an operator brings in a fresh supply. This is a logistical replenishment gap rather than an equipment malfunction, typically caused by delayed material handling or insufficient buffer stock near the line.

Was man dagegen tut

Establish a minimum buffer stock of empty pallets near the end of line with a visual or automated low-level alert that triggers replenishment before depletion, and consider kanban-style or automated pallet dispensing to decouple pallet supply timing from line operation.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,3 % [0,1–1,0 %]
Erwarteter Anteil an der Verlustzeit
0,2 % [0,0–0,5 %]
Anteil an der Verlustzeit bei Auftreten
52 % [40–64 %]
Studien / Einheiten
120 / 162
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,4 % [0,0–1,5 %]18 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,3 % [0,0–1,3 %]44 Studien
  • Bier, Wein und Spirituosen
    0,4 % [0,0–1,5 %]16 Studien
  • Backwaren und Teigwaren
    0,4 % [0,0–1,6 %]0 Studien
  • Fleisch, Geflügel und Fisch
    0,4 % [0,0–1,6 %]6 Studien
  • Obst- und Gemüseverarbeitung
    0,4 % [0,0–1,7 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,4 % [0,0–1,6 %]6 Studien
  • Zucker und Süßwaren
    0,4 % [0,0–1,5 %]3 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,4 % [0,0–1,4 %]6 Studien
  • Futtermittel und Heimtiernahrung
    0,4 % [0,0–1,6 %]4 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,4 % [0,0–1,5 %]13 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The line runs out of empty pallets available for stacking or supporting finished containers, so the filling or downstream accumulation station must halt until an operator brings in a fresh supply. This is a logistical replenishment gap rather than an equipment malfunction, typically caused by delayed material handling or insufficient buffer stock near the line.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

The affected machine state shows a short idle or stop with no fault code logged, often accompanied by blocking of upstream filling or capping stations and starvation further downstream once accumulation buffers empty out. A pallet presence or low-stock sensor, if instrumented, will register an empty or low condition just before the stop event.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Establish a minimum buffer stock of empty pallets near the end of line with a visual or automated low-level alert that triggers replenishment before depletion, and consider kanban-style or automated pallet dispensing to decouple pallet supply timing from line operation.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 93,0 min · laut Bericht: “pallet ran out”
    Wörtliches Zitat anzeigen
    In the month February – May 2019 recorded existence minor idling downtime stop at line 4 , namely , CIP ( Cleaning In Place ) 2,509 minutes , SIP ( Sanitation In Place ) 1,943 minutes , stuck stamp on track 484 minutes , bottle stuck in the SIPA 322 divider , tilting was stuck for 277 minutes and the pallet ran out for 93 minutes .