foratvise
Loslegen
organizational external

Poor housekeeping and workplace organization

organizational externalMahlen und Zerkleinern

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 56 % der Verlustzeit der Linie. Berichtet von 1 der 43 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

A disorganized and dirty work area around the milling equipment forces operators to spend time locating tools, spare parts or cleaning materials, and obstructs access to machine panels, chutes and controls. This organizational deficiency is not a direct equipment failure but an underlying condition that slows down normal operation, response to stoppages and routine servicing, and can also increase contamination or safety risks.

Was man dagegen tut

Implement a structured housekeeping and workplace organization program (such as a five-S approach) around the milling area, with designated storage locations for tools and materials, visual management, and scheduled cleanliness audits integrated into the standard work routine.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,9 % [0,2–2,7 %]
Erwarteter Anteil an der Verlustzeit
0,5 % [0,1–1,6 %]
Anteil an der Verlustzeit bei Auftreten
56 % [45–67 %]
Studien / Einheiten
43 / 48
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    1,1 % [0,1–4,4 %]5 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    1,1 % [0,1–4,5 %]1 Studie
  • Bier, Wein und Spirituosen
    1,1 % [0,1–4,3 %]0 Studien
  • Backwaren und Teigwaren
    1,1 % [0,1–4,3 %]0 Studien
  • Fleisch, Geflügel und Fisch
    1,1 % [0,1–4,4 %]0 Studien
  • Obst- und Gemüseverarbeitung
    1,1 % [0,1–4,3 %]2 Studien
  • Getreide- und Ölsaatenmüllerei
    1,0 % [0,1–4,0 %]7 Studien
  • Zucker und Süßwaren
    1,0 % [0,1–3,9 %]10 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    1,0 % [0,1–3,9 %]5 Studien
  • Futtermittel und Heimtiernahrung
    1,5 % [0,1–6,0 %]6 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    1,1 % [0,1–4,4 %]7 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

A disorganized and dirty work area around the milling equipment forces operators to spend time locating tools, spare parts or cleaning materials, and obstructs access to machine panels, chutes and controls. This organizational deficiency is not a direct equipment failure but an underlying condition that slows down normal operation, response to stoppages and routine servicing, and can also increase contamination or safety risks.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

There is no direct sensor signature in the SCADA/MES system for this cause; it typically appears indirectly as longer-than-expected intervention or changeover durations, recurring manual stop codes classified as organizational or external, and inconsistent operator comments in shift logs that reference searching for tools or clearing obstructed access points.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Implement a structured housekeeping and workplace organization program (such as a five-S approach) around the milling area, with designated storage locations for tools and materials, visual management, and scheduled cleanliness audits integrated into the standard work routine.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Anteil an der Verlustzeit: 21,0 % · laut Bericht: “lack of order and cleanliness in the facility”
    Wörtliches Zitat anzeigen
    On the other hand, operator failures were linked to a lack of order and cleanliness in the facility (21%).