foratvise
Loslegen
organizational external

Power supply disruption

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 2 der 127 Studien, die sie beobachten konnten (begrenzte Evidenz).

Was passiert

An external voltage sag, outage or unstable grid supply interrupts electrical power to the line, causing drives, controllers and auxiliary equipment to lose function until power is restored. The stop originates outside the process itself, in the facility or utility electrical network rather than in a mechanical or process failure.

Was man dagegen tut

Install backup power sources such as UPS or standby generators for critical control and process equipment, and work with the utility or facility electrical team to monitor and improve supply quality. Implement surge protection, automatic transfer switches and a documented restart procedure to minimise downtime after power events.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,7 % [0,2–1,9 %]
Erwarteter Anteil an der Verlustzeit
0,4 % [0,1–1,1 %]
Anteil an der Verlustzeit bei Auftreten
57 % [46–68 %]
Studien / Einheiten
127 / 161
Evidenzgrad
C

Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,8 % [0,1–2,8 %]13 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    1,0 % [0,2–3,1 %]26 Studien
  • Bier, Wein und Spirituosen
    0,8 % [0,1–2,8 %]11 Studien
  • Backwaren und Teigwaren
    1,0 % [0,2–3,4 %]24 Studien
  • Fleisch, Geflügel und Fisch
    0,8 % [0,1–2,9 %]9 Studien
  • Obst- und Gemüseverarbeitung
    0,8 % [0,1–3,0 %]7 Studien
  • Getreide- und Ölsaatenmüllerei
    0,8 % [0,1–2,8 %]6 Studien
  • Zucker und Süßwaren
    0,8 % [0,1–3,0 %]9 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,8 % [0,1–2,7 %]5 Studien
  • Futtermittel und Heimtiernahrung
    0,8 % [0,1–2,9 %]7 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,8 % [0,1–2,9 %]10 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

An external voltage sag, outage or unstable grid supply interrupts electrical power to the line, causing drives, controllers and auxiliary equipment to lose function until power is restored. The stop originates outside the process itself, in the facility or utility electrical network rather than in a mechanical or process failure.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA shows a simultaneous loss-of-communication or fault state across multiple independent machines on the same electrical feed, often with power-quality alarms, UPS switchover events or voltage/frequency deviation logs preceding the stoppage. All line equipment transitions to a stopped or fault state at the same timestamp rather than a single machine failing first.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Install backup power sources such as UPS or standby generators for critical control and process equipment, and work with the utility or facility electrical team to monitor and improve supply quality. Implement surge protection, automatic transfer switches and a documented restart procedure to minimise downtime after power events.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Anteil an den Verlustereignissen: 16,0 % · laut Bericht: “Power supply problems”
    Wörtliches Zitat anzeigen
    70% das paradas de linha estavam relacionadas a problemas no equipamento da Klockner, 16% por problemas de fornecimento de energia e 9% por problemas na máquina de injetora de tinta
  2. Verlustzeit: 419 h · laut Bericht: “disruptions in external power supply or failures in specific equipment units”
    Wörtliches Zitat anzeigen
    At the same time, an additional 419 hours of unplanned downtime were recorded due to disruptions in external power supply or failures in specific equipment units
  3. Mittlere Ereignisdauer: 914 min · laut Bericht: “Power Interruption”
    Wörtliches Zitat anzeigen
    The Power Interruption category only happened twice; it had a high MTTR of 913.5 minutes, which brought the reliability down to 79.22%.