Delay awaiting quality laboratory analysis (titratable acidity)
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 0 der 127 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
Production or release of a batch must pause while a sample is taken to the QC laboratory for titratable acidity measurement, and operations cannot proceed until the analytical result is obtained and the batch is accepted or adjusted. The line or process step is held in a waiting state that depends on laboratory workload and turnaround rather than on equipment condition.
Was man dagegen tut
Implement at-line or inline titratable acidity sensors or rapid analyzers to shorten the feedback loop, and establish parallel sampling and staggered batch scheduling so production can continue on other batches while results are pending. Improve laboratory staffing, sample transport logistics and result reporting systems to reduce the waiting time.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,4 % [0,1–1,1 %]
- Erwarteter Anteil an der Verlustzeit
- 0,2 % [0,0–0,6 %]
- Anteil an der Verlustzeit bei Auftreten
- 57 % [45–67 %]
- Studien / Einheiten
- 127 / 161
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,4 % [0,0–1,6 %]13 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,4 % [0,0–1,4 %]26 Studien
- Bier, Wein und Spirituosen0,4 % [0,0–1,6 %]11 Studien
- Backwaren und Teigwaren0,4 % [0,0–1,4 %]24 Studien
- Fleisch, Geflügel und Fisch0,4 % [0,0–1,6 %]9 Studien
- Obst- und Gemüseverarbeitung0,4 % [0,0–1,8 %]7 Studien
- Getreide- und Ölsaatenmüllerei0,4 % [0,0–1,7 %]6 Studien
- Zucker und Süßwaren0,4 % [0,0–1,6 %]9 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,4 % [0,0–1,7 %]5 Studien
- Futtermittel und Heimtiernahrung0,4 % [0,0–1,7 %]7 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,4 % [0,0–1,5 %]10 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseProduction or release of a batch must pause while a sample is taken to the QC laboratory for titratable acidity measurement, and operations cannot proceed until the analytical result is obtained and the batch is accepted or adjusted. The line or process step is held in a waiting state that depends on laboratory workload and turnaround rather than on equipment condition.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA/MES logs show the line or process unit in an idle or hold state with no associated equipment fault or alarm, the hold period aligning with sample collection and lab result timestamps. Repeated short-to-moderate waiting intervals appear clustered around scheduled quality checkpoints rather than following any mechanical pattern.
Gegenmaßnahme
Ingenieurpraktische HinweiseImplement at-line or inline titratable acidity sensors or rapid analyzers to shorten the feedback loop, and establish parallel sampling and staggered batch scheduling so production can continue on other batches while results are pending. Improve laboratory staffing, sample transport logistics and result reporting systems to reduce the waiting time.
4Quellen
- An implementation of lean technology to improve the lead time of syrup batching process and reduce hot fill line downtime (2023)Quelle öffnenMittlere Ereignisdauer: 15,0 min · laut Bericht: “TA (titratable acidity) measurement and analysis”
Wörtliches Zitat anzeigen
the machine running time to measure TA is around 15 minutes. It shows that the measurement of TA takes long time, which leads to downtime

