Eingeschlossene Studie
An implementation of lean technology to improve the lead time of syrup batching process and reduce hot fill line downtime
1Bibliografische Angaben
- Autoren
- Duy Ly-Anh, An Phan-Hoang, Dung Le-Phuong, Quynh-Lam Ngoc Le, Do Ngoc Hien
- Jahr
- 2023
- Publikationsorgan
- International Journal of Science and Research Archive
- Land
- Vietnam
- Segment
- Erfrischungsgetränke, abgefülltes Wasser und Säfte
- Prozessfamilie
- Abfüll- und Verpackungslinie
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · — Maschinen
- Beobachtungszeitraum
- —
- Datenerhebung
- not_reported
- Intervention
Umfeld laut Studie anzeigen
The research would present an effective performance of lean tools implementing in an Lemon Tea processing line of a Drink Industry as a case study.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 8Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points. | 2 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
waiting time for syrup, filler, packer, sleever, conveyorWörtliches Zitat anzeigen (Section 2.1 / Figure 2)The machine downtime is recognized as a critical problem of the waiting time for syrup, filler, packer, sleever, conveyor, which accounts for 66 percent of the total time (as shown on Figure 2). | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Anteil an der Verlustzeit | 66,0 % | Einfache Extraktion |
total leading time of syrup batching processWörtliches Zitat anzeigen (Section 2.2.2)Total leading time of recently batching syrup process for new product is 140 minutes. | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 140 min | Einfache Extraktion |
total leading time of syrup batching processWörtliches Zitat anzeigen (Section 3 / Figure 11)The project results obtained that the total time in the syrup batching process was reduced from 140 minutes to 98 minutes - a dramatic decrease of 42 minutes (equivalent to a 30% reduction) as shown on Figure 11. | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 98,0 min | Einfache Extraktion |
high fructose corn sugar transfer periodHFCS transfer pumpWörtliches Zitat anzeigen (Section 2.3.1)The total time to complete pumping sugar solution is 35 minutes with a pump diameter of 50mm, length 30m (flexible hose pipeline). | Verringerte Geschwindigkeit | Verlustzeit | 35,0 min | Einfache Extraktion |
pump flow rate below design capacityHFCS transfer pumpWörtliches Zitat anzeigen (Section 2.3.1)The actual pump capacity just reach to 3.5-3.8 bar and the corresponding flow is 10.8 m3/h. | Verringerte Geschwindigkeit | Durchsatz | 10,8 m3/h | Einfache Extraktion |
pumping of sugar solution (HFCS transfer) after pump/pipeline renovationHFCS transfer pumpWörtliches Zitat anzeigen (Section 3)The new flow rate is measured at 18.9 m3/h; The total time to pump all the necessary sugar solution is down to 20 minutes; The usefulness of the pump reaches 58% increasing 24% in comparison with previous system. | Verringerte Geschwindigkeit | Verlustzeit | 20,0 min | Einfache Extraktion |
pump and pipeline renovation (HFCS transfer time reduction)HFCS transfer pumpWörtliches Zitat anzeigen (Section 3)After increasing the inlet installation pressure of the pump to 6.2 bar and raising the pump pipe diameter to 80mm (as shown on Figure 12), the HFCS flow rate reaches 18.9 m3/h and the time to fulfill the mixing tank is reduced from 35 minutes to 20 minutes (10.72%). | Verringerte Geschwindigkeit | Anteil an der Verlustzeit | 10,7 % | Einfache Extraktion |
—HFCS transfer pumpWörtliches Zitat anzeigen (Section 3)The new flow rate is measured at 18.9 m3/h; The total time to pump all the necessary sugar solution is down to 20 minutes; The usefulness of the pump reaches 58% increasing 24% in comparison with previous system. | none | Durchsatz | 18,9 m3/h | Einfache Extraktion |
—HFCS transfer pumpWörtliches Zitat anzeigen (Section 3)The new flow rate is measured at 18.9 m3/h; The total time to pump all the necessary sugar solution is down to 20 minutes; The usefulness of the pump reaches 58% increasing 24% in comparison with previous system. | none | Geschwindigkeitsverhältnis | 58,0 % | Einfache Extraktion |
quality check step (QC parameters: Brix, acidity, pH, appearance)Wörtliches Zitat anzeigen (Section 2.3.3)The total time for QC to complete the job is around 20 minutes. | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 20,0 min | Einfache Extraktion |
quality check step after rearrangementWörtliches Zitat anzeigen (Section 3)After rearranging the quality test for syrup output parameters, the time to complete batching and move to filling step is shortened to only 5 minutes. | Aus dem Bericht nicht klassifizierbar | Verlustzeit | 5,00 min | Einfache Extraktion |
Brix check station relocationBrix meterWörtliches Zitat anzeigen (Section 3)The process is cut down 10-12 minutes of downtime (8.57%). | Aus dem Bericht nicht klassifizierbar | Anteil an der Verlustzeit | 8,57 % | Einfache Extraktion |
waiting time for syrupWörtliches Zitat anzeigen (Section 2.1 (Define phase), page 2)The machine downtime is recognized as a critical problem of the waiting time for syrup, filler, packer, sleever, conveyor, which accounts for 66 percent of the total time (as shown on Figure 2). | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Anteil an der geplanten Zeit | 66,0 % | Einfache Extraktion |
—syrup batching tanks NCB-7 and NCB-8Wörtliches Zitat anzeigen (Section 2.2.2 (Root Cause Analysis), page 6)Total leading time of recently batching syrup process for new product is 140 minutes. | none | Mittlere Ereignisdauer | 140 min | Einfache Extraktion |
HFCS transfer and filtering through pump systemHFCS pump and pipeline, filtering systemWörtliches Zitat anzeigen (Section 2.3.1, page 7)The total time to complete pumping sugar solution is 35 minutes with a pump diameter of 50mm, length 30m (flexible hose pipeline). | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Mittlere Ereignisdauer | 35,0 min | Einfache Extraktion |
quality check for Brix, acidity (TA), pH, appearanceQC department and measurement equipmentWörtliches Zitat anzeigen (Section 2.3.3, page 8)The total time for QC to complete the job is around 20 minutes. | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Mittlere Ereignisdauer | 20,0 min | Einfache Extraktion |
TA (titratable acidity) measurement and analysisTA measuring equipment, QC laboratoryWörtliches Zitat anzeigen (Section 2.3.3, page 8)the machine running time to measure TA is around 15 minutes. It shows that the measurement of TA takes long time, which leads to downtime | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Mittlere Ereignisdauer | 15,0 min | Einfache Extraktion |
—syrup batching tanks NCB-7 and NCB-8Wörtliches Zitat anzeigen (Section 3 (Results), page 6)The project results obtained that the total time in the syrup batching process was reduced from 140 minutes to 98 minutes - a dramatic decrease of 42 minutes (equivalent to a 30% reduction) as shown on Figure 11. | none | Mittlere Ereignisdauer | 98,0 min | Einfache Extraktion |
HFCS transfer and filtering after pump pressure and pipeline optimizationHFCS pump and pipeline systemWörtliches Zitat anzeigen (Section 3 (Results), page 7)After increasing the inlet installation pressure of the pump to 6.2 bar and raising the pump pipe diameter to 80mm ... the HFCS flow rate reaches 18.9 m3/h and the time to fulfill the mixing tank is reduced from 35 minutes to 20 minutes (10.72%). | none | Mittlere Ereignisdauer | 20,0 min | Einfache Extraktion |
quality check for Brix, pH, TA using correlation equation methodQC measurement equipment, Brix meter at mixing stationWörtliches Zitat anzeigen (Section 3 (Results), page 9)After rearranging the quality test for syrup output parameters, the time to complete batching and move to filling step is shortened to only 5 minutes. In addition, it ensures that the product quality meet the standards when the TA measurement step is taken place at the same time with the filling stage. | none | Mittlere Ereignisdauer | 5,00 min | Einfache Extraktion |
Beobachtungseinheiten
- PET Hot Fill Line · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Syrup batching process (overall) · Mischen und Vermengen · Ausgangslage
- Syrup batching process (overall) · Mischen und Vermengen · Nach der Intervention
- HFCS transfer pump · Mischen und Vermengen · Ausgangslage
- HFCS transfer pump · Mischen und Vermengen · Nach der Intervention
- Quality Control / Brix station · Inspektion und Kontrollwägung · Ausgangslage
- Quality Control / Brix station · Inspektion und Kontrollwägung · Nach der Intervention
- Lemon Tea hot fill line · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Lemon Tea hot fill line · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention

