Raw material staging congestion (frequent pallet relocation)
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 1 der 127 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
Insufficient or poorly organized staging space in the raw material holding or thawing area forces operators to repeatedly move pallets to free access routes, maintain rotation order or make room for incoming lots. This non value adding handling consumes labor and forklift capacity and delays the availability of thawed or staged material for the line, creating an organizational bottleneck upstream of production rather than an equipment fault.
Was man dagegen tut
Redesign the staging or thawing area layout with dedicated FIFO lanes sized to real buffer needs, define fixed pallet slotting rules and clear access aisles, and schedule incoming lots to minimize double handling, so that material reaches the line without unnecessary intermediate relocations.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,5 % [0,1–1,4 %]
- Erwarteter Anteil an der Verlustzeit
- 0,3 % [0,1–0,8 %]
- Anteil an der Verlustzeit bei Auftreten
- 57 % [45–67 %]
- Studien / Einheiten
- 127 / 161
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,6 % [0,1–2,3 %]13 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,6 % [0,1–1,9 %]26 Studien
- Bier, Wein und Spirituosen0,6 % [0,1–2,2 %]11 Studien
- Backwaren und Teigwaren0,6 % [0,1–2,0 %]24 Studien
- Fleisch, Geflügel und Fisch0,9 % [0,1–3,3 %]9 Studien
- Obst- und Gemüseverarbeitung0,6 % [0,1–2,2 %]7 Studien
- Getreide- und Ölsaatenmüllerei0,6 % [0,1–2,4 %]6 Studien
- Zucker und Süßwaren0,6 % [0,1–2,3 %]9 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,6 % [0,1–2,3 %]5 Studien
- Futtermittel und Heimtiernahrung0,6 % [0,1–2,4 %]7 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,6 % [0,1–2,3 %]10 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseInsufficient or poorly organized staging space in the raw material holding or thawing area forces operators to repeatedly move pallets to free access routes, maintain rotation order or make room for incoming lots. This non value adding handling consumes labor and forklift capacity and delays the availability of thawed or staged material for the line, creating an organizational bottleneck upstream of production rather than an equipment fault.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseRarely captured directly by SCADA since it occurs outside the controlled process area; it appears indirectly as material starvation or shortage stops logged at the first production machine, extended intervals between material request and material arrival in MES logistics modules, and elevated forklift or warehouse management system movement counts without corresponding production output.
Gegenmaßnahme
Ingenieurpraktische HinweiseRedesign the staging or thawing area layout with dedicated FIFO lanes sized to real buffer needs, define fixed pallet slotting rules and clear access aisles, and schedule incoming lots to minimize double handling, so that material reaches the line without unnecessary intermediate relocations.
4Quellen
- Exploring Lean Manufacturing Integration and Performance Evaluation for Process Optimization in the Food Processing Industry (2026)Quelle öffnenAnteil an den Verlustereignissen: 18,0 % · laut Bericht: “frequent relocation of raw material pallets within the thawing area”
Wörtliches Zitat anzeigen
Additionally, the frequent relocation of raw material pallets within the thawing area represents 18% of waste and the requirement for a 25-minute cleaning cycle of the tamping machine before each batch contributes 14.4%.

