Eingeschlossene Studie
Exploring Lean Manufacturing Integration and Performance Evaluation for Process Optimization in the Food Processing Industry
1Bibliografische Angaben
- Autoren
- Reema Al-Dalain
- Jahr
- 2026
- Publikationsorgan
- Production Engineering Archives
- Land
- Jordan
- Segment
- Fleisch, Geflügel und Fisch
- Prozessfamilie
- Schlachtung, Zerlegung und Primärverarbeitung
- Studientyp
- Einzelfallstudie
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · 6 Maschinen
- Beobachtungszeitraum
- 6 Tage
- Datenerhebung
- manual_logs
- Intervention
Umfeld laut Studie anzeigen
The framework is applied as a case study in a frozen food production line characterized by six sequential processing stages exhibiting wide ranging process reliability and significant change over time variability, providing an empirically rich context for examining how probabilistic analysis complement deterministic lean tools.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 9Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given. | 1 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—Wörtliches Zitat anzeigen (Section 3.4 Value Stream Mapping)The process begins with Thawing, which takes approximately 85 minutes of cycle time and an additional 42 minutes for changeovers, operating at a low 11% uptime, indicating substantial inefficiencies. | Rüsten und Einstellen | Verlustzeit | 42,0 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.4 Value Stream Mapping)The process begins with Thawing, which takes approximately 85 minutes of cycle time and an additional 42 minutes for changeovers, operating at a low 11% uptime, indicating substantial inefficiencies. | none | Verfügbarkeit | 11,0 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.4 Value Stream Mapping)Next, materials proceed to Marinating, with a 20-minute cycle time, 14-minute changeover, and an uptime of 70%, still reflecting limited operational effectiveness. | Rüsten und Einstellen | Verlustzeit | 14,0 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.4 Value Stream Mapping)Next, materials proceed to Marinating, with a 20-minute cycle time, 14-minute changeover, and an uptime of 70%, still reflecting limited operational effectiveness. | none | Verfügbarkeit | 70,0 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.4 Value Stream Mapping)The Compressing stage follows, requiring 25 minutes per cycle, 22 minutes for changeovers, and achieving 80% uptime. | Rüsten und Einstellen | Verlustzeit | 22,0 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.4 Value Stream Mapping)The Compressing stage follows, requiring 25 minutes per cycle, 22 minutes for changeovers, and achieving 80% uptime. | none | Verfügbarkeit | 80,0 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.4 Value Stream Mapping)In the Portioning (Trimming) process, performance improves, with a 55-minute cycle, 11-minute changeover, and a 90% uptime, marking a relatively stable operation. | Rüsten und Einstellen | Verlustzeit | 11,0 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.4 Value Stream Mapping)In the Portioning (Trimming) process, performance improves, with a 55-minute cycle, 11-minute changeover, and a 90% uptime, marking a relatively stable operation. | none | Verfügbarkeit | 90,0 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.4 Value Stream Mapping)The Shock Freeze stage is more efficient, with a 95-minute cycle, 9-minute changeover, and 95% uptime. | Rüsten und Einstellen | Verlustzeit | 9,00 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.4 Value Stream Mapping)The Shock Freeze stage is more efficient, with a 95-minute cycle, 9-minute changeover, and 95% uptime. | none | Verfügbarkeit | 95,0 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.4 Value Stream Mapping)Finally, in Packing, the process takes 85 minutes per cycle, 8 minutes for changeovers, and operates at 94% uptime before products are shipped. | Rüsten und Einstellen | Verlustzeit | 8,00 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.4 Value Stream Mapping)Finally, in Packing, the process takes 85 minutes per cycle, 8 minutes for changeovers, and operates at 94% uptime before products are shipped. | none | Verfügbarkeit | 94,0 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.4 Value Stream Mapping)The weighted average up-time of 73% across all stages masks the severity of the Thawing bottleneck, which operates at only 11% effective availability, implying 89% downtime that cascades delays throughout the entire value stream. | none | Verfügbarkeit | 73,0 % | Einfache Extraktion |
excess stock of raw food awaiting processingWörtliches Zitat anzeigen (Section 3.3 Pareto Analysis / Fig. 1)The graph indicates that excess stock of raw food awaiting processing accounts for approximately 22% of total waste, while frequent miscommunication between operators contributes around 20%. | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Anteil an den Verlustereignissen | 22,0 % | Einfache Extraktion |
frequent miscommunication between operatorsWörtliches Zitat anzeigen (Section 3.3 Pareto Analysis / Fig. 1)The graph indicates that excess stock of raw food awaiting processing accounts for approximately 22% of total waste, while frequent miscommunication between operators contributes around 20%. | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Anteil an den Verlustereignissen | 20,0 % | Einfache Extraktion |
frequent relocation of raw material pallets within the thawing areaWörtliches Zitat anzeigen (Section 3.3 Pareto Analysis / Fig. 1)Additionally, the frequent relocation of raw material pallets within the thawing area represents 18% of waste and the requirement for a 25-minute cleaning cycle of the tamping machine before each batch contributes 14.4%. | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Anteil an den Verlustereignissen | 18,0 % | Einfache Extraktion |
25-minute cleaning cycle of the tamping machine before each batchtamping machineWörtliches Zitat anzeigen (Section 3.3 Pareto Analysis / Fig. 1)Additionally, the frequent relocation of raw material pallets within the thawing area represents 18% of waste and the requirement for a 25-minute cleaning cycle of the tamping machine before each batch contributes 14.4%. | Rüsten und Einstellen | Anteil an den Verlustereignissen | 14,4 % | Einfache Extraktion |
Beobachtungseinheiten
- Thawing · Kühlen und Gefrieren · Ausgangslage
- Marinating · Mischen und Vermengen · Ausgangslage
- Compressing · Formen, Gießen und Dosieren · Ausgangslage
- Portioning (Trimming) · Schneiden, Aufschneiden und Entbeinen · Ausgangslage
- Shock Freeze · Kühlen und Gefrieren · Ausgangslage
- Packing · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Ausgangslage
- Whole line · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage

