foratvise
Loslegen
Rüsten und Einstellen

Manual raw material weighing and transfer to mixing stage

Rüsten und EinstellenVerfügbarkeitMischen und Vermengen

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 56 % der Verlustzeit der Linie. Berichtet von 1 der 31 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

Before a mixing batch can start, operators must manually weigh out the raw materials according to the formulation and physically carry or hoist them to the level or hopper where the mixer is charged. This preparatory handling is sequential with respect to the mixer and adds non-productive time to the changeover or batch-start window, especially when materials must be moved between floors or storage areas.

Was man dagegen tut

Pre-weigh and stage raw materials in advance during the running time of the previous batch, and use automated or semi-automated dosing/batching systems with pneumatic or mechanical conveying to the mixing level to eliminate manual carrying. Kitting of materials and parallel preparation activities reduce the sequential dependency and shorten the changeover or batch-start interval.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,8 % [0,1–2,7 %]
Erwarteter Anteil an der Verlustzeit
0,5 % [0,1–1,5 %]
Anteil an der Verlustzeit bei Auftreten
56 % [43–68 %]
Studien / Einheiten
31 / 40
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    1,0 % [0,1–3,9 %]6 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    1,0 % [0,1–3,8 %]2 Studien
  • Bier, Wein und Spirituosen
    1,0 % [0,1–4,0 %]0 Studien
  • Backwaren und Teigwaren
    1,4 % [0,1–5,5 %]2 Studien
  • Fleisch, Geflügel und Fisch
    1,0 % [0,1–4,1 %]1 Studie
  • Obst- und Gemüseverarbeitung
    1,0 % [0,1–3,9 %]2 Studien
  • Getreide- und Ölsaatenmüllerei
    1,0 % [0,1–4,4 %]0 Studien
  • Zucker und Süßwaren
    1,0 % [0,1–4,1 %]3 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,9 % [0,1–3,5 %]3 Studien
  • Futtermittel und Heimtiernahrung
    1,0 % [0,1–3,6 %]5 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    1,0 % [0,1–3,9 %]7 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

Before a mixing batch can start, operators must manually weigh out the raw materials according to the formulation and physically carry or hoist them to the level or hopper where the mixer is charged. This preparatory handling is sequential with respect to the mixer and adds non-productive time to the changeover or batch-start window, especially when materials must be moved between floors or storage areas.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

The mixer remains in an idle or waiting-for-material state with no agitation or feed signal active, preceded by a gap in which no weighing or charging event is logged in the MES/batch record. Operator or material-handling activity (weighing station use, hoist or elevator cycles) is recorded outside the mixer's run-state log, creating a visible dead time between end of previous batch and start of mixing.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Pre-weigh and stage raw materials in advance during the running time of the previous batch, and use automated or semi-automated dosing/batching systems with pneumatic or mechanical conveying to the mixing level to eliminate manual carrying. Kitting of materials and parallel preparation activities reduce the sequential dependency and shorten the changeover or batch-start interval.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Mittlere Ereignisdauer: 0,960 min · laut Bericht: “Weigh raw materials”
    Wörtliches Zitat anzeigen
    Weigh raw materials Weighing operators Weighing operators External External 0.96 0.96
  2. Mittlere Ereignisdauer: 2,30 min · laut Bericht: “Move raw material from weighing to 3rd level”
    Wörtliches Zitat anzeigen
    Move raw material from weighing to 3rd level Operator 2 DRY / Weighing operators Operator 2 DRY / Weighing operators Internal External 2.30 3.00
  3. Mittlere Ereignisdauer: 0,960 min · laut Bericht: “Weigh raw materials”
    Wörtliches Zitat anzeigen
    Weigh raw materials Weighing operators Weighing operators External External 0.96 0.96
  4. Mittlere Ereignisdauer: 3,00 min · laut Bericht: “Move raw material from weighing to 3rd level”
    Wörtliches Zitat anzeigen
    Move raw material from weighing to 3rd level Operator 2 DRY / Weighing operators Operator 2 DRY / Weighing operators Internal External 2.30 3.00