Ripple plate component failure (separator)
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 58 % der Verlustzeit der Linie. Berichtet von 1 der 37 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
The ripple plate assembly, together with its support shaft and connecting pipe, forms part of the internal stack of a centrifugal separator that guides liquid flow for solid-liquid separation. Fatigue, corrosion or mechanical wear on the shaft or pipe causes cracking, misalignment or loss of sealing, which unbalances the bowl or interrupts the internal flow path and forces the separator to stop.
Was man dagegen tut
Apply a preventive maintenance schedule with periodic inspection, non-destructive testing and timely replacement of the ripple plate shaft and connecting pipe, combined with vibration monitoring and verification of correct alignment and torque during bowl reassembly.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 1,0 % [0,2–3,1 %]
- Erwarteter Anteil an der Verlustzeit
- 0,6 % [0,1–1,8 %]
- Anteil an der Verlustzeit bei Auftreten
- 58 % [46–68 %]
- Studien / Einheiten
- 37 / 44
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte1,2 % [0,1–4,6 %]5 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte1,2 % [0,1–4,9 %]1 Studie
- Bier, Wein und Spirituosen1,2 % [0,1–4,7 %]1 Studie
- Backwaren und Teigwaren1,2 % [0,1–5,0 %]0 Studien
- Fleisch, Geflügel und Fisch1,2 % [0,1–5,1 %]2 Studien
- Obst- und Gemüseverarbeitung1,2 % [0,1–4,8 %]3 Studien
- Getreide- und Ölsaatenmüllerei1,8 % [0,2–6,9 %]6 Studien
- Zucker und Süßwaren1,1 % [0,1–4,5 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel1,1 % [0,1–4,4 %]4 Studien
- Futtermittel und Heimtiernahrung1,2 % [0,1–4,5 %]5 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)1,2 % [0,1–4,4 %]7 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe ripple plate assembly, together with its support shaft and connecting pipe, forms part of the internal stack of a centrifugal separator that guides liquid flow for solid-liquid separation. Fatigue, corrosion or mechanical wear on the shaft or pipe causes cracking, misalignment or loss of sealing, which unbalances the bowl or interrupts the internal flow path and forces the separator to stop.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseVibration alarms and increasing trend prior to stop, abnormal pressure differential or flow imbalance across the separator, motor torque or current spikes, and an unplanned stop state with a mechanical fault code logged for the separator asset.
Gegenmaßnahme
Ingenieurpraktische HinweiseApply a preventive maintenance schedule with periodic inspection, non-destructive testing and timely replacement of the ripple plate shaft and connecting pipe, combined with vibration monitoring and verification of correct alignment and torque during bowl reassembly.
4Quellen
- Riplle Mill Machine Failure Analysis Using the Failure Mode and Effect Analysis (FMEA) Method at PT. Ujong Neubok In (2023)Quelle öffnenZeit zwischen Ereignissen: 6,00 Months · laut Bericht: “Pipa Ripple Plate”
Wörtliches Zitat anzeigen
Pipa Ripple Plate Broken 6 Months
- Riplle Mill Machine Failure Analysis Using the Failure Mode and Effect Analysis (FMEA) Method at PT. Ujong Neubok In (2023)Quelle öffnenZeit zwischen Ereignissen: 6,00 Months · laut Bericht: “As Ripple Plate”
Wörtliches Zitat anzeigen
As Ripple Plate Broken 6 Months

