Eingeschlossene Studie
Riplle Mill Machine Failure Analysis Using the Failure Mode and Effect Analysis (FMEA) Method at PT. Ujong Neubok In
1Bibliografische Angaben
- Autoren
- Jayarullah, Rita Hartati
- Jahr
- 2023
- Publikationsorgan
- Jurnal Inotera
- Land
- Indonesia
- Segment
- Getreide- und Ölsaatenmüllerei
- Prozessfamilie
- Mahlen, Extrahieren und Trennen
- Studientyp
- Zuverlässigkeitsanalyse
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · 1 Maschinen
- Beobachtungszeitraum
- 120 Tage
- Datenerhebung
- maintenance_records
- Intervention
Umfeld laut Studie anzeigen
The Ripple Mill machine is one of the must-have machines at a palm kernel processing station that serves as a palm kernel breaker to separate the shell from the palm kernel.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 8Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—Ripple Mill machineWörtliches Zitat anzeigen (Introduction)The number of times the number of downtime events on the Ripple Mill machine based on company data in 2022 is 32 times. | Anlagenausfall (Störungen) | Anzahl der Ereignisse | 32,0 events | Einfache Extraktion |
As RotorAs Rotor (rotor shaft)Wörtliches Zitat anzeigen (Table 4)As Rotor Wear 6 Months | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 6,00 Months | Einfache Extraktion |
Pipa Ripple PlateRipple Plate pipeWörtliches Zitat anzeigen (Table 4)Pipa Ripple Plate Broken 6 Months | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 6,00 Months | Einfache Extraktion |
BearingBearingWörtliches Zitat anzeigen (Table 4)Bearing Broken 3 Months | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 3,00 Months | Einfache Extraktion |
V-BeltV-BeltWörtliches Zitat anzeigen (Table 4)V-Belt Break 6 Months | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 6,00 Months | Einfache Extraktion |
As Ripple PlateAs Ripple Plate (ripple plate shaft)Wörtliches Zitat anzeigen (Table 4)As Ripple Plate Broken 6 Months | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 6,00 Months | Einfache Extraktion |
Beobachtungseinheiten
- Ripple Mill machine · Trennen (Zentrifugieren, Filtrieren, Membranverfahren) · Ausgangslage

