foratvise
Loslegen
Rüsten und Einstellen

Shift start/end line setup

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 1 der 112 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

At the start of a shift the packaging line must be brought from a stopped or standby state to stable operating conditions, requiring warm-up, checks and fine adjustments before good units are produced; at the end of a shift the line is progressively run down, cleared and prepared for the next shift, which also consumes productive time without output. These transition periods occur independently of any product or format change and are tied purely to the shift schedule.

Was man dagegen tut

Standardize shift handover and start-up/shut-down procedures with checklists, pre-stage settings and materials before the shift begins, and use brief shift overlap so the line can keep running while responsibilities transfer. Apply quick-setup principles to shorten warm-up and shutdown sequences and track them as a distinct, monitored step in the shift schedule.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,5 % [0,1–1,4 %]
Erwarteter Anteil an der Verlustzeit
0,3 % [0,1–0,8 %]
Anteil an der Verlustzeit bei Auftreten
57 % [44–67 %]
Studien / Einheiten
112 / 155
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,6 % [0,1–2,2 %]14 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,5 % [0,1–1,6 %]33 Studien
  • Bier, Wein und Spirituosen
    0,6 % [0,1–2,0 %]14 Studien
  • Backwaren und Teigwaren
    0,6 % [0,1–2,3 %]6 Studien
  • Fleisch, Geflügel und Fisch
    0,6 % [0,1–2,4 %]6 Studien
  • Obst- und Gemüseverarbeitung
    0,6 % [0,1–2,3 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,6 % [0,1–2,2 %]4 Studien
  • Zucker und Süßwaren
    0,6 % [0,1–2,3 %]4 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,6 % [0,1–2,1 %]8 Studien
  • Futtermittel und Heimtiernahrung
    0,6 % [0,1–2,2 %]5 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,9 % [0,1–3,2 %]14 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

At the start of a shift the packaging line must be brought from a stopped or standby state to stable operating conditions, requiring warm-up, checks and fine adjustments before good units are produced; at the end of a shift the line is progressively run down, cleared and prepared for the next shift, which also consumes productive time without output. These transition periods occur independently of any product or format change and are tied purely to the shift schedule.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

MES/SCADA logs show recurring blocks of setup or non-running machine state aligned with the shift calendar at the start and end of each shift, with no accompanying product-change or recipe-change event. Output counters remain flat or show reduced partial counts during these intervals, and the pattern repeats consistently across shifts rather than correlating with specific SKUs.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Standardize shift handover and start-up/shut-down procedures with checklists, pre-stage settings and materials before the shift begins, and use brief shift overlap so the line can keep running while responsibilities transfer. Apply quick-setup principles to shorten warm-up and shutdown sequences and track them as a distinct, monitored step in the shift schedule.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 3.908 min · laut Bericht: “Initial and end of shift setup”
    Wörtliches Zitat anzeigen
    Setting awal dan akhir shift 3,908 35%