Star wheel and guide adjustment during format changeover
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 1 der 85 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
When switching to a different container diameter or shape, the entry, central and other transport star wheels together with their fixed guides must be mechanically repositioned, swapped or re-centered so the containers are correctly indexed through the labeling station. This mechanical resetting and fine alignment, often done manually with gauges or trial containers, consumes time between the last good unit of the previous format and the first good unit of the new one.
Was man dagegen tut
Apply SMED principles with quick-release, tool-less star wheel and guide mounts, pre-set and labeled positions or gauges for each format, and standardized changeover kits prepared in advance so the mechanical reset is a direct swap rather than an iterative trial-and-error adjustment; where volumes justify it, install motorized or cam-indexed guides that recall stored format settings automatically.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,6 % [0,1–1,6 %]
- Erwarteter Anteil an der Verlustzeit
- 0,3 % [0,1–1,0 %]
- Anteil an der Verlustzeit bei Auftreten
- 57 % [45–67 %]
- Studien / Einheiten
- 85 / 113
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,7 % [0,1–2,5 %]11 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,8 % [0,1–2,6 %]29 Studien
- Bier, Wein und Spirituosen0,6 % [0,1–2,3 %]13 Studien
- Backwaren und Teigwaren0,7 % [0,1–2,7 %]1 Studie
- Fleisch, Geflügel und Fisch0,7 % [0,1–2,5 %]4 Studien
- Obst- und Gemüseverarbeitung0,7 % [0,1–2,6 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,7 % [0,1–2,7 %]3 Studien
- Zucker und Süßwaren0,7 % [0,1–2,7 %]3 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,7 % [0,1–2,5 %]4 Studien
- Futtermittel und Heimtiernahrung0,7 % [0,1–2,8 %]4 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,7 % [0,1–2,5 %]9 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseWhen switching to a different container diameter or shape, the entry, central and other transport star wheels together with their fixed guides must be mechanically repositioned, swapped or re-centered so the containers are correctly indexed through the labeling station. This mechanical resetting and fine alignment, often done manually with gauges or trial containers, consumes time between the last good unit of the previous format and the first good unit of the new one.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseThe line or machine state log shows an extended changeover/setup state on the labeler between production orders, with no good-count increments while operators access the star wheel and guide area; downstream and upstream buffers may drain or fill as the labeler is held in manual/jog mode, and repeated short jog or inch moves appear as the mechanism is trialed and re-trialed until containers run without jamming.
Gegenmaßnahme
Ingenieurpraktische HinweiseApply SMED principles with quick-release, tool-less star wheel and guide mounts, pre-set and labeled positions or gauges for each format, and standardized changeover kits prepared in advance so the mechanical reset is a direct swap rather than an iterative trial-and-error adjustment; where volumes justify it, install motorized or cam-indexed guides that recall stored format settings automatically.
4Quellen
- USO DA TROCA RÁPIDA DE FERRAMENTAS – TRF – COMO ESTRATÉGIA DE AUMENTO DE PRODUTIVIDADE EM UMA ROTULADORA DE GARRAFAS PLÁSTICAS (2012)Quelle öffnenVerlustzeit: 4,00 min · laut Bericht: “Central star wheel and central guide”
Wörtliches Zitat anzeigen
Estela central e guia central 4
- USO DA TROCA RÁPIDA DE FERRAMENTAS – TRF – COMO ESTRATÉGIA DE AUMENTO DE PRODUTIVIDADE EM UMA ROTULADORA DE GARRAFAS PLÁSTICAS (2012)Quelle öffnenVerlustzeit: 3,00 min · laut Bericht: “Entry star wheel and entry guide”
Wörtliches Zitat anzeigen
Estrela de entrada e guia de entrada 3
- USO DA TROCA RÁPIDA DE FERRAMENTAS – TRF – COMO ESTRATÉGIA DE AUMENTO DE PRODUTIVIDADE EM UMA ROTULADORA DE GARRAFAS PLÁSTICAS (2012)Quelle öffnenVerlustzeit: 4,00 min · laut Bericht: “Central star wheel and central guide”
Wörtliches Zitat anzeigen
Estela central e guia central 4
- USO DA TROCA RÁPIDA DE FERRAMENTAS – TRF – COMO ESTRATÉGIA DE AUMENTO DE PRODUTIVIDADE EM UMA ROTULADORA DE GARRAFAS PLÁSTICAS (2012)Quelle öffnenVerlustzeit: 1,00 min · laut Bericht: “Entry star wheel and entry guide”
Wörtliches Zitat anzeigen
Estrela de entrada e guia de entrada 1

