Storage/staging delay during changeover
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 55 % der Verlustzeit der Linie. Berichtet von 0 der 60 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
During a product or format change on the baking line, intermediate materials, trays, molds or semi-finished product must be moved into or retrieved from a storage or staging area before the line can be reconfigured and restarted. This handling and waiting activity extends the gap between the last good unit of one run and the first good unit of the next, even though no fault or mechanical repair is involved.
Was man dagegen tut
Pre-stage trays, molds or ingredients close to the line before the scheduled changeover begins, and synchronize storage retrieval or putaway with the changeover plan so it runs in parallel with other setup tasks. Use buffer stock or kanban-type staging areas near the baking line to decouple storage movement time from the critical changeover path.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,4 % [0,1–1,4 %]
- Erwarteter Anteil an der Verlustzeit
- 0,2 % [0,0–0,8 %]
- Anteil an der Verlustzeit bei Auftreten
- 55 % [42–66 %]
- Studien / Einheiten
- 60 / 73
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,5 % [0,0–2,2 %]5 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,5 % [0,0–2,0 %]1 Studie
- Bier, Wein und Spirituosen0,5 % [0,0–2,1 %]0 Studien
- Backwaren und Teigwaren0,5 % [0,0–1,8 %]27 Studien
- Fleisch, Geflügel und Fisch0,5 % [0,0–2,2 %]2 Studien
- Obst- und Gemüseverarbeitung0,5 % [0,0–2,1 %]2 Studien
- Getreide- und Ölsaatenmüllerei0,5 % [0,0–2,3 %]0 Studien
- Zucker und Süßwaren0,5 % [0,0–2,1 %]8 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,5 % [0,0–2,3 %]4 Studien
- Futtermittel und Heimtiernahrung0,5 % [0,0–2,1 %]4 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,5 % [0,0–2,1 %]7 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseDuring a product or format change on the baking line, intermediate materials, trays, molds or semi-finished product must be moved into or retrieved from a storage or staging area before the line can be reconfigured and restarted. This handling and waiting activity extends the gap between the last good unit of one run and the first good unit of the next, even though no fault or mechanical repair is involved.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseShows up as an extended changeover or idle machine-state with no cycle counts and no fault alarms, often bracketed by logged transactions or signals from an adjacent storage/buffer area indicating material movement. Line status transitions directly from changeover to running with a long dwell time that does not correlate with any maintenance work order.
Gegenmaßnahme
Ingenieurpraktische HinweisePre-stage trays, molds or ingredients close to the line before the scheduled changeover begins, and synchronize storage retrieval or putaway with the changeover plan so it runs in parallel with other setup tasks. Use buffer stock or kanban-type staging areas near the baking line to decouple storage movement time from the critical changeover path.
4Quellen
- Modelo propuesto para la implementación de la metodología SMED en una empresa de alimentos de Santiago de Cali (2017)Quelle öffnenAnzahl der Ereignisse: 21,0 events · laut Bericht: “Storage”
Wörtliches Zitat anzeigen
Almacenajes 21 24:30

