foratvise
Loslegen
Leerlauf und Kurzstillstände

Tilting mechanism jam

Leerlauf und KurzstillständeLeistungAbfüllen

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei weniger als 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 53 % der Verlustzeit der Linie. Berichtet von 0 der 120 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

The tilting slot or guide that orients or positions containers for filling binds mechanically due to misalignment, debris, worn guides or a stuck cam/actuator, so the moving part cannot complete its stroke and halts container flow at the station.

Was man dagegen tut

Clear the jammed slot, inspect and realign guides, lubricate moving parts and replace worn components; add debris detection or guarding and schedule preventive inspection of the tilting mechanism.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,3 % [0,1–1,0 %]
Erwarteter Anteil an der Verlustzeit
0,2 % [0,0–0,5 %]
Anteil an der Verlustzeit bei Auftreten
53 % [40–64 %]
Studien / Einheiten
120 / 162
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,4 % [0,0–1,5 %]18 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,3 % [0,0–1,2 %]44 Studien
  • Bier, Wein und Spirituosen
    0,4 % [0,0–1,5 %]16 Studien
  • Backwaren und Teigwaren
    0,4 % [0,0–1,7 %]0 Studien
  • Fleisch, Geflügel und Fisch
    0,4 % [0,0–1,5 %]6 Studien
  • Obst- und Gemüseverarbeitung
    0,4 % [0,0–1,6 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,4 % [0,0–1,6 %]6 Studien
  • Zucker und Süßwaren
    0,4 % [0,0–1,7 %]3 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,4 % [0,0–1,6 %]6 Studien
  • Futtermittel und Heimtiernahrung
    0,4 % [0,0–1,7 %]4 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,4 % [0,0–1,6 %]13 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The tilting slot or guide that orients or positions containers for filling binds mechanically due to misalignment, debris, worn guides or a stuck cam/actuator, so the moving part cannot complete its stroke and halts container flow at the station.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA shows a short, recurrent stop at the filler or tilting station with the tilt actuator position sensor remaining in an intermediate or active state longer than its normal cycle time, often paired with upstream blocking and downstream starvation counters incrementing on neighbouring conveyors.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Clear the jammed slot, inspect and realign guides, lubricate moving parts and replace worn components; add debris detection or guarding and schedule preventive inspection of the tilting mechanism.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 277 min · laut Bericht: “tilting was stuck”
    Wörtliches Zitat anzeigen
    In the month February – May 2019 recorded existence minor idling downtime stop at line 4 , namely , CIP ( Cleaning In Place ) 2,509 minutes , SIP ( Sanitation In Place ) 1,943 minutes , stuck stamp on track 484 minutes , bottle stuck in the SIPA 322 divider , tilting was stuck for 277 minutes and the pallet ran out for 93 minutes .