foratvise
Loslegen
not classifiable

Unspecified palletizer losses

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 56 % der Verlustzeit der Linie. Berichtet von 1 der 112 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

The source report aggregates palletizer downtime and output losses into broad accounting buckets (total, equipment, operational, planned) without identifying the specific failure mode, jam, changeover or organizational event that caused each stop. The underlying physical or organizational mechanism therefore cannot be isolated from the label alone.

Was man dagegen tut

Improve the loss-reporting taxonomy and reason-code structure on the palletizer so that each stop is tagged at source with a specific cause (mechanical fault, film/strap jam, changeover, starvation, planned maintenance), enabling disaggregation of these generic buckets into actionable categories for root-cause analysis.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,6 % [0,1–1,6 %]
Erwarteter Anteil an der Verlustzeit
0,3 % [0,1–0,9 %]
Anteil an der Verlustzeit bei Auftreten
56 % [45–67 %]
Studien / Einheiten
112 / 155
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,6 % [0,1–2,2 %]14 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,7 % [0,1–2,4 %]33 Studien
  • Bier, Wein und Spirituosen
    0,6 % [0,1–2,2 %]14 Studien
  • Backwaren und Teigwaren
    0,7 % [0,1–2,6 %]6 Studien
  • Fleisch, Geflügel und Fisch
    0,7 % [0,1–2,5 %]6 Studien
  • Obst- und Gemüseverarbeitung
    0,7 % [0,1–2,5 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    0,7 % [0,1–2,6 %]4 Studien
  • Zucker und Süßwaren
    0,7 % [0,1–2,6 %]4 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,6 % [0,1–2,3 %]8 Studien
  • Futtermittel und Heimtiernahrung
    0,7 % [0,1–2,5 %]5 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,6 % [0,1–2,2 %]14 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The source report aggregates palletizer downtime and output losses into broad accounting buckets (total, equipment, operational, planned) without identifying the specific failure mode, jam, changeover or organizational event that caused each stop. The underlying physical or organizational mechanism therefore cannot be isolated from the label alone.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

In SCADA/MES data this appears as time booked against generic loss-accounting codes on the palletizer asset, with aggregated downtime or speed-loss totals but no linked alarm, fault code or reason-code detail to distinguish equipment failure from adjustment, idling or planned events.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Improve the loss-reporting taxonomy and reason-code structure on the palletizer so that each stop is tagged at source with a specific cause (mechanical fault, film/strap jam, changeover, starvation, planned maintenance), enabling disaggregation of these generic buckets into actionable categories for root-cause analysis.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 0 min · laut Bericht: “Planned losses”
    Wörtliches Zitat anzeigen
    Planned losses (min) 0 160 0 0 0 160 7
  2. Verlustzeit: 157 min · laut Bericht: “Operational losses”
    Wörtliches Zitat anzeigen
    Operational losses (min) 278 494 106 53 157 1088 48
  3. Verlustzeit: 152 min · laut Bericht: “Equipment losses”
    Wörtliches Zitat anzeigen
    Equipment losses (min) 420 364 24 55 152 1015 44.8
  4. Verlustzeit: 309 min · laut Bericht: “Total Losses”
    Wörtliches Zitat anzeigen
    Total Losses(min) 698 1018 130 108 309 2263
  5. Anteil an der Verlustzeit: 13,7 % · laut Bericht: “Total Losses”
    Wörtliches Zitat anzeigen
    % of Losses 30.8 45 5.8 4.8 13.7