Reduced speed and minor stoppages (unspecified)
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 56 % der Verlustzeit der Linie. Berichtet von 1 der 127 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
The report groups together periods of below-target running speed and short, operator-cleared interruptions without distinguishing between the two, so the underlying physical cause (mechanical drag, minor jams, sensor faults, material flow irregularities, or operator-paced adjustments) cannot be isolated from the label alone. Such generic entries typically arise when the line is affected by several small, recurring frictions that were not individually logged or categorized by the original study.
Was man dagegen tut
Introduce finer-grained event logging (automatic stop/speed-state capture with reason codes) so that speed losses and minor stoppages are recorded and timestamped separately, enabling Pareto analysis to identify the dominant recurring frictions. Once disaggregated, apply targeted countermeasures such as autonomous maintenance, sensor recalibration, or flow-path adjustments to the specific causes that emerge.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,5 % [0,1–1,5 %]
- Erwarteter Anteil an der Verlustzeit
- 0,3 % [0,1–0,8 %]
- Anteil an der Verlustzeit bei Auftreten
- 56 % [44–67 %]
- Studien / Einheiten
- 127 / 161
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,6 % [0,1–2,3 %]13 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,6 % [0,1–1,9 %]26 Studien
- Bier, Wein und Spirituosen0,6 % [0,1–2,3 %]11 Studien
- Backwaren und Teigwaren0,6 % [0,1–2,1 %]24 Studien
- Fleisch, Geflügel und Fisch0,6 % [0,1–2,2 %]9 Studien
- Obst- und Gemüseverarbeitung0,6 % [0,1–2,4 %]7 Studien
- Getreide- und Ölsaatenmüllerei0,6 % [0,1–2,4 %]6 Studien
- Zucker und Süßwaren0,9 % [0,1–3,6 %]9 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,6 % [0,1–2,3 %]5 Studien
- Futtermittel und Heimtiernahrung0,6 % [0,1–2,4 %]7 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,6 % [0,1–2,4 %]10 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseThe report groups together periods of below-target running speed and short, operator-cleared interruptions without distinguishing between the two, so the underlying physical cause (mechanical drag, minor jams, sensor faults, material flow irregularities, or operator-paced adjustments) cannot be isolated from the label alone. Such generic entries typically arise when the line is affected by several small, recurring frictions that were not individually logged or categorized by the original study.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseSCADA/MES data show an alternating pattern of running states at below-nominal rate interspersed with short downtime events, without a dominant fault code or consistent machine-state signature; aggregate OEE reports often lump this time under a single generic non-value-added bucket. No single sensor or alarm correlates strongly with the loss, making root-cause attribution difficult from the trend data alone.
Gegenmaßnahme
Ingenieurpraktische HinweiseIntroduce finer-grained event logging (automatic stop/speed-state capture with reason codes) so that speed losses and minor stoppages are recorded and timestamped separately, enabling Pareto analysis to identify the dominant recurring frictions. Once disaggregated, apply targeted countermeasures such as autonomous maintenance, sensor recalibration, or flow-path adjustments to the specific causes that emerge.
4Quellen
- Anteil an der Verlustzeit: 13,7 % · laut Bericht: “reduced speed and minor stoppage”
Wörtliches Zitat anzeigen
Analysis showed the distribution of the losses with set-up and failures being the predominant with 66.4% of total lost time, followed by defects participating with 19.9% and reduced speed and minor stoppage contributing with 13.7%.

