foratvise
Loslegen
Eingeschlossene Studie

Lean Manufacturing Effects in a Serbian Confectionery Company – Case Study

Quelle öffnen

1Bibliografische Angaben

Autoren
Ilija V. Djekic, Dragan Zivanovic, Sladjana Dragojlovic, Radoslava Dragovic
Jahr
2014
Publikationsorgan
Organizacija
Land
Serbia
Segment
Zucker und Süßwaren
Prozessfamilie
Gesamtwerk oder nicht spezifiziert
Studientyp
Vorher-nachher-Intervention
Extraktionsumfang
Volltext
Umfang
3 Werke · 9 Linien · — Maschinen
Beobachtungszeitraum
730 Tage
Datenerhebung
manual_logs
Intervention
Umfeld laut Studie anzeigen
Company 'case study' is a leading confectionery producer in Serbia with annual production of more than 25,000 t.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 12Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time.2 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
reduced speed and minor stoppage
Wörtliches Zitat anzeigen (Section 3.2)
Analysis showed the distribution of the losses with set-up and failures being the predominant with 66.4% of total lost time, followed by defects participating with 19.9% and reduced speed and minor stoppage contributing with 13.7%.
Aus dem Bericht nicht klassifizierbarAnteil an der Verlustzeit13,7 %Durch Schiedsentscheid
defects
Wörtliches Zitat anzeigen (Section 3.2)
Analysis showed the distribution of the losses with set-up and failures being the predominant with 66.4% of total lost time, followed by defects participating with 19.9% and reduced speed and minor stoppage contributing with 13.7%.
Prozessfehler (Ausschuss und Nacharbeit)Anteil an der Verlustzeit19,9 %Beide Extraktionen übereinstimmend
set-up and failures
Wörtliches Zitat anzeigen (Section 3.2)
Analysis showed the distribution of the losses with set-up and failures being the predominant with 66.4% of total lost time, followed by defects participating with 19.9% and reduced speed and minor stoppage contributing with 13.7%.
Aus dem Bericht nicht klassifizierbarAnteil an der Verlustzeit66,4 %Durch Schiedsentscheid
—
Wörtliches Zitat anzeigen (Table 3 (Q4/2012))
OVERALL 87.9% 87.4% 84.3% 84.1% 80.6% 84.5% 87.8% 92.3%
noneOEE92,3 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Table 3 (Q1/2011))
Production line 1 85.2% 87.9% 83.2% 81.6% 82.5% 83.6% 89.7% 91.1%
noneOEE85,2 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2011))
Production line 1 225.3 228.7 1.5%
noneZeit zwischen Ereignissen225 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q4/2012))
Production line 1 85.2% 87.9% 83.2% 81.6% 82.5% 83.6% 89.7% 91.1%
noneOEE91,1 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2012))
Production line 1 225.3 228.7 1.5%
noneZeit zwischen Ereignissen229 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q1/2011))
Production line 2 90.4% 86.8% 82.7% 88.8% 86.4% 92.3% 92.6% 93.6%
noneOEE90,4 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2011))
Production line 2 114.8 155.0 35.0%
noneZeit zwischen Ereignissen115 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q4/2012))
Production line 2 90.4% 86.8% 82.7% 88.8% 86.4% 92.3% 92.6% 93.6%
noneOEE93,6 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2012))
Production line 2 114.8 155.0 35.0%
noneZeit zwischen Ereignissen155 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q1/2011))
Production line 3 89.9% 81.1% 84.9% 72.1% 58.0% 75.2% 83.6% 85.6%
noneOEE89,9 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2011))
Production line 3 55.9 60.9 8.8%
noneZeit zwischen Ereignissen55,9 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q4/2012))
Production line 3 89.9% 81.1% 84.9% 72.1% 58.0% 75.2% 83.6% 85.6%
noneOEE85,6 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2012))
Production line 3 55.9 60.9 8.8%
noneZeit zwischen Ereignissen60,9 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q1/2011))
Production line 4 87.9% 85.6% 78.4% 75.2% 68.7% 76.6% 77.5% 86.1%
noneOEE87,9 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2011))
Production line 4 319.8 312.9 -2.1%
noneZeit zwischen Ereignissen320 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q4/2012))
Production line 4 87.9% 85.6% 78.4% 75.2% 68.7% 76.6% 77.5% 86.1%
noneOEE86,1 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2012))
Production line 4 319.8 312.9 -2.1%
noneZeit zwischen Ereignissen313 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q1/2011))
Production line 5 87.6% 84.2% 80.8% 86.1% 80.5% 81.7% 87.7% 95.3%
noneOEE87,6 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2011))
Production line 5 50.6 82.0 61.9%
noneZeit zwischen Ereignissen50,6 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q4/2012))
Production line 5 87.6% 84.2% 80.8% 86.1% 80.5% 81.7% 87.7% 95.3%
noneOEE95,3 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2012))
Production line 5 50.6 82.0 61.9%
noneZeit zwischen Ereignissen82,0 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q1/2011))
Production line 6 90.2% 90.6% 87.5% 85.8% 83.7% 89.9% 90.7% 96.1%
noneOEE90,2 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2011))
Production line 6 156.0 170.3 9.2%
noneZeit zwischen Ereignissen156 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q4/2012))
Production line 6 90.2% 90.6% 87.5% 85.8% 83.7% 89.9% 90.7% 96.1%
noneOEE96,1 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2012))
Production line 6 156.0 170.3 9.2%
noneZeit zwischen Ereignissen170 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q1/2011))
Production line 7 85.1% 86.6% 85.1% 85.8% 83.2% 84.4% 83.1% 87.5%
noneOEE85,1 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2011))
Production line 7 55.1 59.5 7.9%
noneZeit zwischen Ereignissen55,1 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q4/2012))
Production line 7 85.1% 86.6% 85.1% 85.8% 83.2% 84.4% 83.1% 87.5%
noneOEE87,5 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2012))
Production line 7 55.1 59.5 7.9%
noneZeit zwischen Ereignissen59,5 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q1/2011))
Production line 8 88.1% 90.1% 85.6% 91.1% 93.6% 92.6% 94.6% 98.3%
noneOEE88,1 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2011))
Production line 8 204.6 241.8 18.2%
noneZeit zwischen Ereignissen205 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q4/2012))
Production line 8 88.1% 90.1% 85.6% 91.1% 93.6% 92.6% 94.6% 98.3%
noneOEE98,3 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2012))
Production line 8 204.6 241.8 18.2%
noneZeit zwischen Ereignissen242 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q1/2011))
Production line 9 86.9% 93.6% 90.8% 90.2% 88.5% 84.0% 90.5% 96.7%
noneOEE86,9 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2011))
Production line 9 66.3 70.9 6.9%
noneZeit zwischen Ereignissen66,3 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q4/2012))
Production line 9 86.9% 93.6% 90.8% 90.2% 88.5% 84.0% 90.5% 96.7%
noneOEE96,7 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 6 (Average MTBF in 2012))
Production line 9 66.3 70.9 6.9%
noneZeit zwischen Ereignissen70,9 hEinfache Extraktion
—
Wörtliches Zitat anzeigen (Table 3 (Q1/2011))
OVERALL 87.9% 87.4% 84.3% 84.1% 80.6% 84.5% 87.8% 92.3%
noneOEE87,9 %Einfache Extraktion
minor problems
Wörtliches Zitat anzeigen (Section 4.1, page 5)
a total of 2284 minor problems had been recorded, with over 95% of issues revealed in due time
Leerlauf und KurzstillständeAnzahl der Ereignisse2.284 eventsEinfache Extraktion
SMED (changeover) time reduction
Wörtliches Zitat anzeigen (Section 4.3, page 6)
Latest fine-tuning in 2012 decreased SMED time for 7.6% or 3473 minutes
Rüsten und EinstellenAnteil an der Verlustzeit7,60 %Einfache Extraktion
visual control improvement memos fully implemented
Wörtliches Zitat anzeigen (Section 4.1, page 5)
During the observed period visual control tables initiated 61 improvement memos out of which 39% were fully implemented
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Anteil an den Verlustereignissen39,0 %Einfache Extraktion
problem solving sessions effectiveness
Wörtliches Zitat anzeigen (Section 4.4, page 6)
A total of 19 problem solving sessions with an average of two meeting per session were initiated with 58% of solving effectiveness
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Anteil an den Verlustereignissen58,0 %Einfache Extraktion

Beobachtungseinheiten

  • Production line 9 · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Overall (9 production lines) · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
  • Production line 1 · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Production line 1 · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
  • Production line 2 · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Production line 2 · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
  • Production line 3 · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Production line 3 · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
  • Production line 4 · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Production line 4 · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
  • Production line 5 · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Production line 5 · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
  • Production line 6 · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Production line 6 · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
  • Production line 7 · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Production line 7 · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
  • Production line 8 · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Production line 8 · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
  • Production line 9 · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
  • Overall (9 production lines) · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Overall plant · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention