Unwanted crystallization in cooked product
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 48 % der Verlustzeit der Linie. Berichtet von 1 der 57 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
During cooking or concentration of sugar- or solute-rich mixtures, local supersaturation combined with seeding nuclei, temperature fluctuations, excessive agitation shear, or prolonged holding time triggers premature or uncontrolled crystal nucleation and growth within the mass. The resulting crystalline structure produces a grainy texture, cloudiness, or hardened deposits that fail the sensory or physical specification at first-pass inspection.
Was man dagegen tut
Tighten control of cooking temperature, concentration (Brix) and cooling/holding profile through closed-loop recipe management, and minimize mechanical disturbance or seeding contamination during the critical supersaturation phase. Standardize cleaning of contact surfaces to remove residual crystal nuclei between batches and validate the process window with in-line Brix or refractometer feedback.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,8 % [0,1–2,3 %]
- Erwarteter Anteil an der Verlustzeit
- 0,4 % [0,1–1,1 %]
- Anteil an der Verlustzeit bei Auftreten
- 48 % [36–59 %]
- Studien / Einheiten
- 57 / 69
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,9 % [0,1–3,6 %]5 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,9 % [0,1–3,6 %]1 Studie
- Bier, Wein und Spirituosen0,9 % [0,1–3,8 %]0 Studien
- Backwaren und Teigwaren1,1 % [0,1–3,8 %]24 Studien
- Fleisch, Geflügel und Fisch1,0 % [0,1–4,0 %]2 Studien
- Obst- und Gemüseverarbeitung0,9 % [0,1–3,6 %]2 Studien
- Getreide- und Ölsaatenmüllerei0,9 % [0,1–3,8 %]0 Studien
- Zucker und Süßwaren0,9 % [0,1–3,3 %]8 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,9 % [0,1–3,4 %]4 Studien
- Futtermittel und Heimtiernahrung0,9 % [0,1–3,5 %]4 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,9 % [0,1–3,3 %]7 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseDuring cooking or concentration of sugar- or solute-rich mixtures, local supersaturation combined with seeding nuclei, temperature fluctuations, excessive agitation shear, or prolonged holding time triggers premature or uncontrolled crystal nucleation and growth within the mass. The resulting crystalline structure produces a grainy texture, cloudiness, or hardened deposits that fail the sensory or physical specification at first-pass inspection.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseBatch trend logs show the cooking temperature or Brix/refractive-index setpoint drifting outside the controlled band, or holding time at a given temperature extending beyond the normal process window, without a corresponding equipment fault alarm. Quality or lab-entry systems record an elevated rate of texture/appearance rejects or downgrades tied to specific batch IDs, while the machine state itself remains in normal run mode throughout the event.
Gegenmaßnahme
Ingenieurpraktische HinweiseTighten control of cooking temperature, concentration (Brix) and cooling/holding profile through closed-loop recipe management, and minimize mechanical disturbance or seeding contamination during the critical supersaturation phase. Standardize cleaning of contact surfaces to remove residual crystal nuclei between batches and validate the process window with in-line Brix or refractometer feedback.
4Quellen
- Pengendalian Cacat Bumbu Minyak Varian Mie Instant dengan Integrasi Metode QCC, FMEA, dan RCA (2026)Quelle öffnenAnteil an den Verlustereignissen: 28,0 % · laut Bericht: “crystal”
Wörtliches Zitat anzeigen
Pada 1.193 defect yang terklasifikasi, crystal merupakan kategori terbesar (28,0%).

