foratvise
Loslegen
organizational external

Waiting for supervisor or maintenance instructions

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 55 % der Verlustzeit der Linie. Berichtet von 1 der 127 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

The line stands idle because operators lack authorization or technical direction to proceed, needing to wait for a supervisor, planner or maintenance technician to issue instructions or work orders before action can be taken. This reflects an organizational communication or decision-making bottleneck rather than a technical equipment fault.

Was man dagegen tut

Establish clear escalation protocols, decentralized decision authority and standing work instructions so operators can act without waiting for case-by-case approval, supported by radio or digital messaging systems for rapid dispatch of maintenance orders. Visual management boards and predefined response trees for common scenarios reduce dependency on real-time supervisor availability.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,5 % [0,1–1,5 %]
Erwarteter Anteil an der Verlustzeit
0,3 % [0,1–0,9 %]
Anteil an der Verlustzeit bei Auftreten
55 % [44–65 %]
Studien / Einheiten
127 / 161
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,6 % [0,1–2,4 %]13 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,6 % [0,1–2,0 %]26 Studien
  • Bier, Wein und Spirituosen
    0,6 % [0,1–2,4 %]11 Studien
  • Backwaren und Teigwaren
    0,6 % [0,1–2,1 %]24 Studien
  • Fleisch, Geflügel und Fisch
    0,9 % [0,1–3,5 %]9 Studien
  • Obst- und Gemüseverarbeitung
    0,6 % [0,1–2,4 %]7 Studien
  • Getreide- und Ölsaatenmüllerei
    0,7 % [0,1–2,5 %]6 Studien
  • Zucker und Süßwaren
    0,6 % [0,1–2,3 %]9 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,6 % [0,1–2,5 %]5 Studien
  • Futtermittel und Heimtiernahrung
    0,6 % [0,1–2,3 %]7 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,6 % [0,1–2,3 %]10 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The line stands idle because operators lack authorization or technical direction to proceed, needing to wait for a supervisor, planner or maintenance technician to issue instructions or work orders before action can be taken. This reflects an organizational communication or decision-making bottleneck rather than a technical equipment fault.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA/MES shows the line or station in an idle or standby state with no active alarm and no material movement, often logged under a generic downtime reason code awaiting manual operator classification. Duration tends to be irregular and not correlated with any sensor fault, and the stop typically ends abruptly once a manual command or mode change is entered by an operator.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Establish clear escalation protocols, decentralized decision authority and standing work instructions so operators can act without waiting for case-by-case approval, supported by radio or digital messaging systems for rapid dispatch of maintenance orders. Visual management boards and predefined response trees for common scenarios reduce dependency on real-time supervisor availability.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 5.153 min · laut Bericht: “Waiting for maintenance instruction and orders”
    Wörtliches Zitat anzeigen
    Waiting for maintenance instruction and orders 5153 4.92 98.22
  2. Anteil an der Verlustzeit: 4,92 % · laut Bericht: “Waiting for maintenance instruction and orders”
    Wörtliches Zitat anzeigen
    Waiting for maintenance instruction and orders 5153 4.92 98.22
  3. Verlustzeit: 7,00 min/day · laut Bericht: “clarification of the shift task”
    Wörtliches Zitat anzeigen
    The development and implementation of the printed form of the shift task have helped to eliminate the daily time spent (7 minutes) for its clarification and have also eliminated the loss of information by the work performers
  4. Verlustzeit: 10,0 min · laut Bericht: “waiting for instructions from superiors”
    Wörtliches Zitat anzeigen
    10 minutes of waiting for instructions from superiors to start the day's production.
  5. Verlustzeit: 5,00 min · laut Bericht: “waiting for instructions from superiors”
    Wörtliches Zitat anzeigen
    Waiting times reduced from 20 min to 10 min and from 10 min to 5 min which represents 50% completion