Eingeschlossene Studie
The implementation of an integrated Lean Management-HACCP model: application in the food industry in Casablanca,Morocco
1Bibliografische Angaben
- Autoren
- —
- Jahr
- 2025
- Publikationsorgan
- —
- Land
- Morocco
- Segment
- Backwaren und Teigwaren
- Prozessfamilie
- Formen, Backen und Garen
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 2 Linien · — Maschinen
- Beobachtungszeitraum
- 120 Tage
- Datenerhebung
- not_reported
- Intervention
Umfeld laut Studie anzeigen
an industrial agri-food company specialising in the manufacture of pastries, Viennese pastries and bakery products located in Casablanca, Morocco
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 11Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given. | 1 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time. | 2 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance. | 2 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points. | 2 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—Wörtliches Zitat anzeigen (Section 3.1.4 narrative)to achieve an efficiency rate of 76% . (Gallaire, 2008). | none | OEE | 76,0 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Section 3.1.4, OEE calculation table)Quality= Value Added/Net Operating = 250/260=96% | none | Qualität | 96,0 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Section 3.1.4, OEE calculation table)Productivity= Net running time/Gross running time = 260/390=66% | none | Leistung | 66,0 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Section 3.1.4, OEE calculation table)Availability= Gross uptime/Gross downtime = 390/440= 88% | none | Verfügbarkeit | 88,0 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Section 3.1.4, OEE calculation table)OEE = Availability*Productivity*Quality = 55.8% | none | OEE | 55,8 % | Beide Extraktionen übereinstimmend |
waiting for materials to arriveWörtliches Zitat anzeigen (Table 1)Waiting times reduced from 20 min to 10 min and from 10 min to 5 min which represents 50% completion | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Verlustzeit | 10,0 min | Durch Schiedsentscheid |
Waiting timeWörtliches Zitat anzeigen (Section 3.1.4 narrative)the waiting time to 15 minutes | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Verlustzeit | 15,0 min | Durch Schiedsentscheid |
Touch-upsWörtliches Zitat anzeigen (Section 3.1.4 narrative)the time of touch-ups to 60 minutes | Prozessfehler (Ausschuss und Nacharbeit) | Verlustzeit | 60,0 min | Durch Schiedsentscheid |
non-compliant productsWörtliches Zitat anzeigen (Table 1)Only 5% of non- compliant products per month | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 5,00 % | Beide Extraktionen übereinstimmend |
non-conformityWörtliches Zitat anzeigen (Section 3.1.4 narrative)the non- conformity time to 5 minutes | Prozessfehler (Ausschuss und Nacharbeit) | Verlustzeit | 5,00 min | Beide Extraktionen übereinstimmend |
Non-quality/ Non-conformityWörtliches Zitat anzeigen (Section 3.1.4, OEE calculation table)Non-quality/ Non-conformity 10 min | Prozessfehler (Ausschuss und Nacharbeit) | Verlustzeit | 10,0 min | Beide Extraktionen übereinstimmend |
Waiting timeWörtliches Zitat anzeigen (Section 3.1.4, OEE calculation table)Waiting time 40 min | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Verlustzeit | 40,0 min | Durch Schiedsentscheid |
Touch-upsWörtliches Zitat anzeigen (Section 3.1.4, OEE calculation table)Touch-ups 90 min | Prozessfehler (Ausschuss und Nacharbeit) | Verlustzeit | 90,0 min | Durch Schiedsentscheid |
products with defectsWörtliches Zitat anzeigen (Table 1)20% ofproductswithdefects /month | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 20,0 % | Beide Extraktionen übereinstimmend |
BreakdownsmachinesWörtliches Zitat anzeigen (Section 3.1.4 narrative / OEE calculation table)This implies a waste of 50 minutes. | Anlagenausfall (Störungen) | Verlustzeit | 50,0 min | Einfache Extraktion |
BreakdownsmachinesWörtliches Zitat anzeigen (Section 3.1.4 narrative)We can see how 5 machines break down with a 10 minute stoppage for every 8 hours worked. | Anlagenausfall (Störungen) | Anzahl der Ereignisse | 5,00 events | Einfache Extraktion |
BreakdownsmachinesWörtliches Zitat anzeigen (Section 3.1.4 narrative)We can see how 5 machines break down with a 10 minute stoppage for every 8 hours worked. | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 10,0 min | Einfache Extraktion |
MealsWörtliches Zitat anzeigen (Section 3.1.4, OEE calculation table)Meals 30 min | Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage) | Verlustzeit | 30,0 min | Einfache Extraktion |
BreakWörtliches Zitat anzeigen (Section 3.1.4, OEE calculation table)Break 10 min | Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage) | Verlustzeit | 10,0 min | Einfache Extraktion |
series changeoverWörtliches Zitat anzeigen (Table 1)The series changeover time is 20 min . | Rüsten und Einstellen | Mittlere Ereignisdauer | 20,0 min | Einfache Extraktion |
waiting for materials to arriveWörtliches Zitat anzeigen (Table 1)20 min wait for materials to arrive; | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Verlustzeit | 20,0 min | Einfache Extraktion |
waiting for instructions from superiorsWörtliches Zitat anzeigen (Table 1)10 minutes of waiting for instructions from superiors to start the day's production. | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Verlustzeit | 10,0 min | Einfache Extraktion |
BreakdownsmachinesWörtliches Zitat anzeigen (Section 3.1.4 narrative)the breakdowns were reduced to 2 machines/8 hours | Anlagenausfall (Störungen) | Anzahl der Ereignisse | 2,00 events | Einfache Extraktion |
series changeoverWörtliches Zitat anzeigen (Table 1)Series changeover time reduced from 20 min to 10 min | Rüsten und Einstellen | Mittlere Ereignisdauer | 10,0 min | Einfache Extraktion |
waiting for instructions from superiorsWörtliches Zitat anzeigen (Table 1)Waiting times reduced from 20 min to 10 min and from 10 min to 5 min which represents 50% completion | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Verlustzeit | 5,00 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table (OEE calculation), page 820)Breakdowns: 5 pannes * 10 min = 50 min | Anlagenausfall (Störungen) | Verlustzeit | 50,0 min | Einfache Extraktion |
series changeoverWörtliches Zitat anzeigen (Table 1, Waste number 4, page 818)The series changeover time is 20 min. | Rüsten und Einstellen | Verlustzeit | 20,0 min | Einfache Extraktion |
Beobachtungseinheiten
- Production line (pastry/bakery) - Line 1 · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
- Production line (pastry/bakery) - Line 1 · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Production line - baseline · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage

