WIP and packing material adjustment
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 56 % der Verlustzeit der Linie. Berichtet von 1 der 112 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
During a changeover the packaging line must be re-set to match a new work-in-progress batch or a different packing material (films, boxes, labels format), requiring loading, threading and fine-tuning of material handling and dosing elements before stable packs are produced. This adjustment work sits between the end of the previous run and the first good pack of the new run.
Was man dagegen tut
Standardize changeover sequences with pre-staged WIP and packing material kits, use quick-connect or cartridge-style material loading, and apply SMED principles to convert internal adjustment steps into external preparation performed while the line is still running the previous order.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,5 % [0,1–1,4 %]
- Erwarteter Anteil an der Verlustzeit
- 0,3 % [0,1–0,8 %]
- Anteil an der Verlustzeit bei Auftreten
- 56 % [44–66 %]
- Studien / Einheiten
- 112 / 155
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,6 % [0,1–2,1 %]14 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,5 % [0,1–1,7 %]33 Studien
- Bier, Wein und Spirituosen0,6 % [0,1–2,2 %]14 Studien
- Backwaren und Teigwaren0,6 % [0,1–2,4 %]6 Studien
- Fleisch, Geflügel und Fisch0,6 % [0,1–2,3 %]6 Studien
- Obst- und Gemüseverarbeitung0,6 % [0,1–2,4 %]4 Studien
- Getreide- und Ölsaatenmüllerei0,6 % [0,1–2,2 %]4 Studien
- Zucker und Süßwaren0,6 % [0,1–2,2 %]4 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,6 % [0,1–2,2 %]8 Studien
- Futtermittel und Heimtiernahrung0,6 % [0,1–2,4 %]5 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,8 % [0,1–3,1 %]14 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseDuring a changeover the packaging line must be re-set to match a new work-in-progress batch or a different packing material (films, boxes, labels format), requiring loading, threading and fine-tuning of material handling and dosing elements before stable packs are produced. This adjustment work sits between the end of the previous run and the first good pack of the new run.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseMES/SCADA shows an extended changeover or setup machine-state between two production orders, with low or zero throughput counters, frequent manual mode or jog activations, and no fault alarms, distinguishing it from a failure stop. Operator login events and material-load confirmations typically bracket the downtime window.
Gegenmaßnahme
Ingenieurpraktische HinweiseStandardize changeover sequences with pre-staged WIP and packing material kits, use quick-connect or cartridge-style material loading, and apply SMED principles to convert internal adjustment steps into external preparation performed while the line is still running the previous order.
4Quellen
- ANALISIS PERHITUNGAN OVERALL EQUIPMENT EFFECTIVENESS (OEE) PADA MESIN PACKING UNTUK MENINGKATKAN NILAI AVAILABILITY MESIN (2014)Quelle öffnenVerlustzeit: 1.740 min · laut Bericht: “Adjustment of WIP and packing material”
Wörtliches Zitat anzeigen
Penyesuaian WIP dan Pack Material 1,740 71%

