foratvise
Loslegen
Anlagenausfall (Störungen)

Wrapping machine component failure

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 58 % der Verlustzeit der Linie. Berichtet von 1 der 112 Studien, die sie beobachten konnten (spärliche Evidenz).

Was passiert

Individual mechanical subsystems of the wrapping machine, such as the cutting blade, the ear-folding mechanism, the cap closer, the paper feed unit, the size/gauge adjustment, or the cooling drum, wear out, lose alignment or lose their set point, so the machine can no longer form, close or cool the wrapped unit correctly and the line stops until the part is repaired or readjusted. Because several independent subsystems can fail in this way, the equipment experiences recurring unplanned stoppages even though the root cause differs each time.

Was man dagegen tut

Implement subsystem-specific preventive maintenance such as scheduled blade sharpening or replacement, periodic inspection and lubrication of the flap and cap mechanisms, calibration checks on the paper feed and size adjustment, and monitoring of the cooling drum temperature, supported by condition monitoring to detect drift before failure. Keep critical spare parts for each subsystem available to shorten repair time when a failure does occur.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,6 % [0,1–1,6 %]
Erwarteter Anteil an der Verlustzeit
0,3 % [0,1–0,9 %]
Anteil an der Verlustzeit bei Auftreten
58 % [47–68 %]
Studien / Einheiten
112 / 155
Evidenzgrad
D

Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    0,7 % [0,1–2,4 %]14 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    0,6 % [0,1–2,0 %]33 Studien
  • Bier, Wein und Spirituosen
    0,7 % [0,1–2,4 %]14 Studien
  • Backwaren und Teigwaren
    0,7 % [0,1–2,5 %]6 Studien
  • Fleisch, Geflügel und Fisch
    0,7 % [0,1–2,6 %]6 Studien
  • Obst- und Gemüseverarbeitung
    0,7 % [0,1–2,6 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    1,1 % [0,1–4,2 %]4 Studien
  • Zucker und Süßwaren
    0,7 % [0,1–2,6 %]4 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    0,7 % [0,1–2,4 %]8 Studien
  • Futtermittel und Heimtiernahrung
    0,7 % [0,1–2,7 %]5 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    0,7 % [0,1–2,3 %]14 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

Individual mechanical subsystems of the wrapping machine, such as the cutting blade, the ear-folding mechanism, the cap closer, the paper feed unit, the size/gauge adjustment, or the cooling drum, wear out, lose alignment or lose their set point, so the machine can no longer form, close or cool the wrapped unit correctly and the line stops until the part is repaired or readjusted. Because several independent subsystems can fail in this way, the equipment experiences recurring unplanned stoppages even though the root cause differs each time.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA/MES logs show short-to-medium unplanned downtime events tagged with distinct fault or alarm codes per subsystem (blade, feeder, flap mechanism, cap station, cooling unit), each with its own frequency and repair duration. The line state transitions to fault while upstream units show blocking and downstream units show starvation, and temperature or position sensors associated with the failed subsystem drift outside their normal band just before the stop.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Implement subsystem-specific preventive maintenance such as scheduled blade sharpening or replacement, periodic inspection and lubrication of the flap and cap mechanisms, calibration checks on the paper feed and size adjustment, and monitoring of the cooling drum temperature, supported by condition monitoring to detect drift before failure. Keep critical spare parts for each subsystem available to shorten repair time when a failure does occur.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Anzahl der Ereignisse: 105 events · laut Bericht: “Kağıt alamama durumu”
    Wörtliches Zitat anzeigen
    Arıza Sayısına Göre Pareto Diyagramı 105 44 37 25 23 17 15 161 0 50 100 150 200 3 6 5 1 2 4 7 8
  2. Anzahl der Ereignisse: 44,0 events · laut Bericht: “Perfektörün soğutmaması”
    Wörtliches Zitat anzeigen
    Arıza Sayısına Göre Pareto Diyagramı 105 44 37 25 23 17 15 161 0 50 100 150 200 3 6 5 1 2 4 7 8
  3. Anzahl der Ereignisse: 37,0 events · laut Bericht: “Kulakçık arızası”
    Wörtliches Zitat anzeigen
    Arıza Sayısına Göre Pareto Diyagramı 105 44 37 25 23 17 15 161 0 50 100 150 200 3 6 5 1 2 4 7 8
  4. Anzahl der Ereignisse: 25,0 events · laut Bericht: “Bıçak arızası”
    Wörtliches Zitat anzeigen
    Arıza Sayısına Göre Pareto Diyagramı 105 44 37 25 23 17 15 161 0 50 100 150 200 3 6 5 1 2 4 7 8
  5. Anzahl der Ereignisse: 23,0 events · laut Bericht: “Granaj ayarının bozulması”
    Wörtliches Zitat anzeigen
    Arıza Sayısına Göre Pareto Diyagramı 105 44 37 25 23 17 15 161 0 50 100 150 200 3 6 5 1 2 4 7 8
  6. Anzahl der Ereignisse: 17,0 events · laut Bericht: “Kapak arızası”
    Wörtliches Zitat anzeigen
    Arıza Sayısına Göre Pareto Diyagramı 105 44 37 25 23 17 15 161 0 50 100 150 200 3 6 5 1 2 4 7 8
  7. Verlustzeit: 4.727 min · laut Bericht: “Kağıt alamama durumu”
    Wörtliches Zitat anzeigen
    Arıza Süresine Göre Pareto Diyagramı 4727 2495 2249 2246 1408 943 638 10768 0 2000 4000 6000 8000 10000 12000 3 5 1 6 2 7 4 8
  8. Verlustzeit: 2.495 min · laut Bericht: “Kulakçık arızası”
    Wörtliches Zitat anzeigen
    Arıza Süresine Göre Pareto Diyagramı 4727 2495 2249 2246 1408 943 638 10768 0 2000 4000 6000 8000 10000 12000 3 5 1 6 2 7 4 8
  9. Verlustzeit: 2.249 min · laut Bericht: “Bıçak arızası”
    Wörtliches Zitat anzeigen
    Arıza Süresine Göre Pareto Diyagramı 4727 2495 2249 2246 1408 943 638 10768 0 2000 4000 6000 8000 10000 12000 3 5 1 6 2 7 4 8
  10. Verlustzeit: 2.246 min · laut Bericht: “Perfektörün soğutmaması”
    Wörtliches Zitat anzeigen
    Arıza Süresine Göre Pareto Diyagramı 4727 2495 2249 2246 1408 943 638 10768 0 2000 4000 6000 8000 10000 12000 3 5 1 6 2 7 4 8
  11. Verlustzeit: 1.408 min · laut Bericht: “Granaj ayarının bozulması”
    Wörtliches Zitat anzeigen
    Arıza Süresine Göre Pareto Diyagramı 4727 2495 2249 2246 1408 943 638 10768 0 2000 4000 6000 8000 10000 12000 3 5 1 6 2 7 4 8
  12. Verlustzeit: 638 min · laut Bericht: “Kapak arızası”
    Wörtliches Zitat anzeigen
    Arıza Süresine Göre Pareto Diyagramı 4727 2495 2249 2246 1408 943 638 10768 0 2000 4000 6000 8000 10000 12000 3 5 1 6 2 7 4 8