foratvise
Loslegen
Eingeschlossene Studie

ANALISIS PERHITUNGAN EFEKTIFITAS MESIN FILLER LINE LAB MENGGUNAKAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) (Studi Kasus di PT. X)

Quelle öffnen

1Bibliografische Angaben

Autoren
Lutfan Edison Abdullah, Bambang Purwanggono
Jahr
2016
Publikationsorgan
Industrial Engineering Online Journal
DOI
—
Land
Indonesia
Segment
Milchprodukte
Prozessfamilie
Abfüll- und Verpackungslinie
Studientyp
Einzelfallstudie
Extraktionsumfang
Volltext
Umfang
1 Werke · 2 Linien · 2 Maschinen
Beobachtungszeitraum
15 Tage
Datenerhebung
manual_logs
Intervention
Umfeld laut Studie anzeigen
Produksi utama PT.X adalah susu murni dalam kemasan dimana setiap harinya mampu memproduksi sebanyak 100 ton susu murni yang diperoleh dari penghasil susu disekitar Bandung.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 12Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time.2 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
—filler LAB
Wörtliches Zitat anzeigen (Section 3, Availability Factor (Faktor Ketersediaan), page 4)
Total downtime selama 15 hari kerja pada bulan Februari 2014 adalah 107,61 jam.
Aus dem Bericht nicht klassifizierbarVerlustzeit108 jamBeide Extraktionen übereinstimmend
—filler LAB
Wörtliches Zitat anzeigen (Section 3, Performance Rate (Faktor Performansi), page 4)
Maka dapat diketahui Performance Factor Line LAB adalah sebesar 92%
noneLeistung92,0 %Beide Extraktionen übereinstimmend
—filler LAB
Wörtliches Zitat anzeigen (Section 3, Availability Factor (Faktor Ketersediaan), page 4)
Maka dapat diketahui Availibility Factor Line LAB adalah sebesar 84%
noneVerfügbarkeit84,0 %Beide Extraktionen übereinstimmend
—filler LAB
Wörtliches Zitat anzeigen (Section 3, Overall Equipment Effectiveness, page 5)
Dari perhitungan di atas maka diketahui nilai Overall Equipment Effectiveness (OEE) dari Line LAB PT.X sebesar 77%.
noneOEE77,0 %Beide Extraktionen übereinstimmend
—filler LAB
Wörtliches Zitat anzeigen (Section 3, Quality Factor (Faktor Kualitas), page 4-5)
Maka dapat diketahui Quality Factor Line LAB adalah sebesar 98%
noneQualität98,0 %Einfache Extraktion
CIP (clean in proses)filler LAB
Wörtliches Zitat anzeigen (Lanjutan Tabel 2, Data Utilisasi Mesin LAB, page 4)
Total 107.61 6.469 638.570 49.660
Rüsten und EinstellenVerlustzeit49,7 jamEinfache Extraktion
—
Wörtliches Zitat anzeigen (Page 5, Kesimpulan section)
tingkat quality 99%
noneQualität99,0 %Einfache Extraktion

Beobachtungseinheiten

  • Line LAB · Abfüllen · Ausgangslage
  • LAB Line 2 filler · Abfüllen · Ausgangslage