foratvise
Loslegen
Rüsten und Einstellen

CIP (Clean-in-Place) cleaning cycle

Rüsten und EinstellenVerfügbarkeitAbfüllen

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 56 % der Verlustzeit der Linie. Berichtet von 3 der 120 Studien, die sie beobachten konnten (begrenzte Evidenz).

Was passiert

The filler and its product-contact piping are taken offline so that an automated Clean-in-Place sequence can circulate rinse, caustic/acid and sanitizing solutions through the system, interrupting production while the cycle runs. This cleaning is normally required between product changes or at scheduled hygiene intervals to meet food-safety standards before the next run can start.

Was man dagegen tut

Standardize and automate the CIP recipe with sensor-based endpoint detection (conductivity, turbidity) to avoid over-cleaning, schedule CIP within planned changeover or shift-break windows, and use a dedicated CIP supply skid or parallel circuits so the filler can be returned to production as soon as the sanitary verification is complete.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
0,9 % [0,2–2,2 %]
Erwarteter Anteil an der Verlustzeit
0,5 % [0,1–1,2 %]
Anteil an der Verlustzeit bei Auftreten
56 % [44–67 %]
Studien / Einheiten
120 / 162
Evidenzgrad
C

Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    1,3 % [0,2–4,1 %]18 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    1,3 % [0,3–3,4 %]44 Studien
  • Bier, Wein und Spirituosen
    0,9 % [0,1–3,0 %]16 Studien
  • Backwaren und Teigwaren
    1,0 % [0,1–3,5 %]0 Studien
  • Fleisch, Geflügel und Fisch
    1,0 % [0,1–3,5 %]6 Studien
  • Obst- und Gemüseverarbeitung
    1,0 % [0,1–3,6 %]4 Studien
  • Getreide- und Ölsaatenmüllerei
    1,0 % [0,1–3,6 %]6 Studien
  • Zucker und Süßwaren
    1,0 % [0,1–3,5 %]3 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    1,0 % [0,1–3,3 %]6 Studien
  • Futtermittel und Heimtiernahrung
    1,0 % [0,1–3,7 %]4 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    1,0 % [0,1–3,4 %]13 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The filler and its product-contact piping are taken offline so that an automated Clean-in-Place sequence can circulate rinse, caustic/acid and sanitizing solutions through the system, interrupting production while the cycle runs. This cleaning is normally required between product changes or at scheduled hygiene intervals to meet food-safety standards before the next run can start.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA/MES logs show the filler and CIP skid transitioning into a dedicated CIP or cleaning machine state, with valve sequencing, flow, temperature and conductivity trends confirming each rinse/wash/sanitize step; the filler state duration accumulates as changeover or non-production time and downstream stations show starvation while the cycle completes.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Standardize and automate the CIP recipe with sensor-based endpoint detection (conductivity, turbidity) to avoid over-cleaning, schedule CIP within planned changeover or shift-break windows, and use a dedicated CIP supply skid or parallel circuits so the filler can be returned to production as soon as the sanitary verification is complete.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Verlustzeit: 49,7 jam · laut Bericht: “CIP (clean in proses)”
    Wörtliches Zitat anzeigen
    Total 107.61 6.469 638.570 49.660
  2. Anteil an der Verlustzeit: 15,0 % · laut Bericht: “CIP processes”
    Wörtliches Zitat anzeigen
    Specifically,label changeovers account for a 16% loss,followed closely by CIP processes at 15% and size changeovers at 8.9%.
  3. Verlustzeit: 2.509 min · laut Bericht: “CIP (Cleaning In Place)”
    Wörtliches Zitat anzeigen
    In the month February – May 2019 recorded existence minor idling downtime stop at line 4 , namely , CIP ( Cleaning In Place ) 2,509 minutes , SIP ( Sanitation In Place ) 1,943 minutes , stuck stamp on track 484 minutes , bottle stuck in the SIPA 322 divider , tilting was stuck for 277 minutes and the pallet ran out for 93 minutes .