foratvise
Loslegen
Eingeschlossene Studie

Total Productive Maintenance Model applying SMED and FMEA to increase the overall efficiency of equipment (OEE) in the food sector

Quelle öffnen

1Bibliografische Angaben

Autoren
Ernesto Altamirano-Flores, Karen Caballero-Rojas, Oscar Palacios-Aguilar
Jahr
2021
Publikationsorgan
AHFE international
Land
Peru
Segment
Lebensmittelherstellung (nicht spezifiziert oder gemischt)
Prozessfamilie
Abfüll- und Verpackungslinie
Studientyp
Vorher-nachher-Intervention
Extraktionsumfang
Volltext
Umfang
1 Werke · 1 Linien · 2 Maschinen
Beobachtungszeitraum
182 Tage
Datenerhebung
manual_logs
Intervention
Umfeld laut Studie anzeigen
This case study will be carried out within the production process of sauces, whose production process is classified into two main sub-processes: manufactur-ing and packaging, which make up the entire production line.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 9Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Inconsistencies above 10 percentage points, or OEE factors above 100%.0 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
—Volpak 7
Wörtliches Zitat anzeigen (Figure 2 / Design of the validation section)
there was a notable increase in the OEE of the Volpak 7, reaching 60% in the month of October.
noneOEE60,0 %Beide Extraktionen übereinstimmend
—Volpak 7
Wörtliches Zitat anzeigen (Initial diagnosis section)
The availability represented the lowest rate of the OEE com-ponents with a value of 51.46%
noneVerfügbarkeit51,5 %Beide Extraktionen übereinstimmend
CIP wash stopCIP system
Wörtliches Zitat anzeigen (Initial diagnosis section)
The stop that represents the largest proportion is the CIP wash stop, which represents a stop time of approximately 16 hours.
Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage)Verlustzeit16,0 hDurch Schiedsentscheid
CIP wash stop (maximum recorded)CIP system
Wörtliches Zitat anzeigen (Initial diagnosis section)
the plant management recorded washing times that exceeded the planned one, occupying a maximum of 26 stop-page hours
Anlagenausfall (Störungen)Verlustzeit26,0 hBeide Extraktionen übereinstimmend
—Volpak 7
Wörtliches Zitat anzeigen (Table 1)
OEE (volpak 7) 45.37% 43.96% 41.67%
noneOEE45,4 %Einfache Extraktion
—Volpak 7
Wörtliches Zitat anzeigen (Table 1)
OEE (volpak 7) 45.37% 43.96% 41.67%
noneOEE44,0 %Einfache Extraktion
—Volpak 7
Wörtliches Zitat anzeigen (Table 1)
OEE (volpak 7) 45.37% 43.96% 41.67%
noneOEE41,7 %Einfache Extraktion
—Volpak 7
Wörtliches Zitat anzeigen (Table 1)
MTTR (volpak 7) 2.63 4.41 3.75
noneZeit zwischen Ereignissen2,63 hEinfache Extraktion
—Volpak 7
Wörtliches Zitat anzeigen (Table 1)
MTTR (volpak 7) 2.63 4.41 3.75
noneZeit zwischen Ereignissen4,41 hEinfache Extraktion
—Volpak 7
Wörtliches Zitat anzeigen (Table 1)
MTTR (volpak 7) 2.63 4.41 3.75
noneZeit zwischen Ereignissen3,75 hEinfache Extraktion
—Volpak 7
Wörtliches Zitat anzeigen (Table 1)
MTBF (volpak 7) 69.37 85.59 61.70
noneZeit zwischen Ereignissen69,4 hEinfache Extraktion
—Volpak 7
Wörtliches Zitat anzeigen (Table 1)
MTBF (volpak 7) 69.37 85.59 61.70
noneZeit zwischen Ereignissen85,6 hEinfache Extraktion
—Volpak 7
Wörtliches Zitat anzeigen (Table 1)
MTBF (volpak 7) 69.37 85.59 61.70
noneZeit zwischen Ereignissen61,7 hEinfache Extraktion
—CIP system
Wörtliches Zitat anzeigen (Table 1)
MTTR (system CIP) 10.26 11.18 10.64
noneZeit zwischen Ereignissen10,3 hEinfache Extraktion
—CIP system
Wörtliches Zitat anzeigen (Table 1)
MTTR (system CIP) 10.26 11.18 10.64
noneZeit zwischen Ereignissen11,2 hEinfache Extraktion
—CIP system
Wörtliches Zitat anzeigen (Table 1)
MTTR (system CIP) 10.26 11.18 10.64
noneZeit zwischen Ereignissen10,6 hEinfache Extraktion
—CIP system
Wörtliches Zitat anzeigen (Table 1)
MTBF (system CIP) 14.22 18.29 16
noneZeit zwischen Ereignissen14,2 hEinfache Extraktion
—CIP system
Wörtliches Zitat anzeigen (Table 1)
MTBF (system CIP) 14.22 18.29 16
noneZeit zwischen Ereignissen18,3 hEinfache Extraktion
—CIP system
Wörtliches Zitat anzeigen (Table 1)
MTBF (system CIP) 14.22 18.29 16
noneZeit zwischen Ereignissen16,0 hEinfache Extraktion

Beobachtungseinheiten

  • Volpak 7 · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Nach der Intervention
  • Volpak 7 · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Ausgangslage
  • CIP system · Reinigung (CIP) und Hygiene · Ausgangslage