Eingeschlossene Studie
Six Sigma application in an Irish meat processing plant to improve process yields
1Bibliografische Angaben
- Autoren
- Rebecca Gilligan, Rachel Moran, Olivia McDermott
- Jahr
- 2023
- Publikationsorgan
- The TQM Journal
- Land
- Ireland
- Segment
- Fleisch, Geflügel und Fisch
- Prozessfamilie
- Schlachtung, Zerlegung und Primärverarbeitung
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · — Maschinen
- Beobachtungszeitraum
- —
- Datenerhebung
- manual_logs
- Intervention
Umfeld laut Studie anzeigen
The case study organisation where this research was undertaken was within the boning hall of a red meat processing plant based in Ireland.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 7Hohes Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
Customer D non-conforming at LSLWörtliches Zitat anzeigen (Table 3)D | non-conforming at the lower specification limit at 84 and 88%, respectively | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 88,0 % | Beide Extraktionen übereinstimmend |
Customer C non-conforming at LSLWörtliches Zitat anzeigen (Table 3)C | non-conforming at the lower specification limit at 84 and 88%, respectively | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 84,0 % | Beide Extraktionen übereinstimmend |
Customer C non-conforming below LSLWörtliches Zitat anzeigen (Table 3)C | 100% non-conforming, where the results fell largely below the lower specification limit. No over-trimming | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 100 % | Beide Extraktionen übereinstimmend |
Customer C non-conforming, left skewed toward LSLWörtliches Zitat anzeigen (Table 3)C | 20% were non-conforming within the specifications left skewed of the target (i.e. the non-conforming longissimus dorsi were found towards the lower limit (LSL) | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 20,0 % | Beide Extraktionen übereinstimmend |
Customer E outside specificationWörtliches Zitat anzeigen (Table 3)E | 20% outside specifications | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 20,0 % | Beide Extraktionen übereinstimmend |
Customer A non-conforming at USLWörtliches Zitat anzeigen (Table 3)Outlier observed A customer specification – however, it was the most conforming specification, with only 16% non-conforming in the USL | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 16,0 % | Einfache Extraktion |
Customer A outliers non-conformingWörtliches Zitat anzeigen (Table 3)A | Outliers - 100% non-conforming with the specification requirements | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 100 % | Einfache Extraktion |
Customer E non-conforming, right skewed toward USLWörtliches Zitat anzeigen (Table 3)E | 20% were non-conforming within the specifications -Right skewed of the target (i.e. that non-conforming were found towards the upper specification limit (USL)) | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 20,0 % | Einfache Extraktion |
over-trimmingWörtliches Zitat anzeigen (Table 6, page 20)gluteus medius tails 7 0.35 0.79 | Prozessfehler (Ausschuss und Nacharbeit) | Verlustzeit | 0,350 kg | Einfache Extraktion |
over-trimmingWörtliches Zitat anzeigen (Table 6, page 20)longissimus dorsi tails 12 0.38 4.52 | Prozessfehler (Ausschuss und Nacharbeit) | Verlustzeit | 0,380 kg | Einfache Extraktion |
Beobachtungseinheiten
- gluteus medius tails · Schneiden, Aufschneiden und Entbeinen · Ausgangslage
- longissimus dorsi tails · Schneiden, Aufschneiden und Entbeinen · Ausgangslage
- longissimus dorsi backstrap · Schneiden, Aufschneiden und Entbeinen · Ausgangslage
- Boning Hall · Schneiden, Aufschneiden und Entbeinen · Ausgangslage

