foratvise
Loslegen
Eingeschlossene Studie

Production Model Based on Lean Manufacturing, MRP, MPS and TPM to Reduce Losses in a MSE in the Bakery Sector

Quelle öffnen

1Bibliografische Angaben

Autoren
Marcela Garay -Rimarachin, Diego Eduardo Mejia -Espinoza
Jahr
2023
Publikationsorgan
International Conference on Industrial Engineering and Operations Management (IEOM)
Land
Peru
Segment
Backwaren und Teigwaren
Prozessfamilie
Formen, Backen und Garen
Studientyp
Vorher-nachher-Intervention
Extraktionsumfang
Volltext
Umfang
1 Werke · — Linien · — Maschinen
Beobachtungszeitraum
30 Tage
Datenerhebung
questionnaire
Intervention
Umfeld laut Studie anzeigen
The present study is a case study since it is based on only one specific topic in the baking industry.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 6Hohes Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
Downtime rate
Wörtliches Zitat anzeigen (Section 5.4 Validation)
The downtime rate: This decreased from 35.26% to 10%, using the 5S methodology, this was reduced thanks to the implementation of cleanliness and order in the plant
Aus dem Bericht nicht klassifizierbarAnteil an der Verlustzeit35,3 %Einfache Extraktion
Stock break
Wörtliches Zitat anzeigen (Section 5.4 Validation)
Out of stock: This decreased thanks to the implementation of the MRP, down from 25% to 19%, with this indicator it was possible to know how much raw material is needed to be able to produce the final product.
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Anteil an der Verlustzeit25,0 %Einfache Extraktion
Machine failure
Wörtliches Zitat anzeigen (Section 5.4 Validation)
Machine failure: This indicator decreased from 48% to 15%, thanks to the implementation of the TPM, thanks to this the company was able to have better productivity.
Anlagenausfall (Störungen)Anteil an der Verlustzeit48,0 %Einfache Extraktion
Defective products rate
Wörtliches Zitat anzeigen (Section 5.4 Validation)
Defective product index: This indicator managed to drop from 10% to 5%, with this the company achieved better profitability and had fewer economic losses.
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote10,0 %Einfache Extraktion
Downtime rate
Wörtliches Zitat anzeigen (Section 5.4 Validation)
The downtime rate: This decreased from 35.26% to 10%, using the 5S methodology, this was reduced thanks to the implementation of cleanliness and order in the plant
Aus dem Bericht nicht klassifizierbarAnteil an der Verlustzeit10,0 %Einfache Extraktion
Stock break
Wörtliches Zitat anzeigen (Section 5.4 Validation)
Out of stock: This decreased thanks to the implementation of the MRP, down from 25% to 19%, with this indicator it was possible to know how much raw material is needed to be able to produce the final product.
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Anteil an der Verlustzeit19,0 %Einfache Extraktion
Machine failure
Wörtliches Zitat anzeigen (Section 5.4 Validation)
Machine failure: This indicator decreased from 48% to 15%, thanks to the implementation of the TPM, thanks to this the company was able to have better productivity.
Anlagenausfall (Störungen)Anteil an der Verlustzeit15,0 %Einfache Extraktion
Defective products rate
Wörtliches Zitat anzeigen (Section 5.4 Validation)
Defective product index: This indicator managed to drop from 10% to 5%, with this the company achieved better profitability and had fewer economic losses.
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote5,00 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 1)
Downtime rate | percentage | 35.26%
Aus dem Bericht nicht klassifizierbarAnteil an der geplanten Zeit35,3 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 1)
Machine failure | percentage | 48%
Anlagenausfall (Störungen)Anteil an der Verlustzeit48,0 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 1)
Stock break | percentage | 25%
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Anteil an der Verlustzeit25,0 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 1)
Defective products rate | percentage | 10%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote10,0 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 1)
Machine failure | percentage | 15%
Anlagenausfall (Störungen)Anteil an der Verlustzeit15,0 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 1)
Stock break | percentage | 19%
Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung)Anteil an der Verlustzeit19,0 %Einfache Extraktion
—
Wörtliches Zitat anzeigen (Table 1)
Defective products rate | percentage | 5%
Prozessfehler (Ausschuss und Nacharbeit)Fehlerquote5,00 %Einfache Extraktion

Beobachtungseinheiten

  • Bakery MSE plant · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Bakery MSE plant · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
  • bakery · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • bakery · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention