Eingeschlossene Studie
Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies
1Bibliografische Angaben
- Autoren
- Sair Castañeda, Sharon Rodriguez, Orkun Yıldız, Duilio Aranda, José C. Álvarez
- Jahr
- 2024
- Publikationsorgan
- International Journal of Engineering Trends and Technology
- Land
- Peru
- Segment
- Zucker und Süßwaren
- Prozessfamilie
- Formen, Backen und Garen
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · 2 Maschinen
- Beobachtungszeitraum
- 60 Tage
- Datenerhebung
- manual_logs
- Intervention
Umfeld laut Studie anzeigen
The company under study belongs to the food industry in Lima, Peru. It has five production lines: Chocolate Line, Confectionery, Instant Products, Cereals and Milling.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 9Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given. | 1 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—Wörtliches Zitat anzeigen (Discussion)availability increases by 12.10%; initially, this parameter presented a percentage of 79.06%, and after the implementation, a value equal to 89.37% was obtained. | none | Verfügbarkeit | 89,4 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Section 3.3.3)Currently, there is 70.48% and its parameters of availability (78.05%), performance (94.86%) and quality (95.19%) | none | Qualität | 95,2 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Section 3.3.3)Currently, there is 70.48% and its parameters of availability (78.05%), performance (94.86%) and quality (95.19%) | none | Leistung | 94,9 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Section 3.3.3)Currently, there is 70.48% and its parameters of availability (78.05%), performance (94.86%) and quality (95.19%) | none | Verfügbarkeit | 78,1 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Section 3.3.3)Currently, there is 70.48% and its parameters of availability (78.05%), performance (94.86%) and quality (95.19%) | none | OEE | 70,5 % | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Table 1)OEE 78.05% 90.00% 11.95 pp | none | OEE | 78,1 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 4.1)a gap in machinery availability has been identified, with the company under study reporting a value of 79.06%; however, the industry reflects that the value is acceptable greater than 90%. | none | Verfügbarkeit | 79,1 % | Einfache Extraktion |
—Doser/Cutter and PackerWörtliches Zitat anzeigen (Conclusion)The number of stops due to machinery breakdowns and human errors was reduced, resulting in the optimization of the values of the MTBF MTTR indicators from 29.23 to 34.94 and from 7.72 to 8.72, respectively, with the application of the first pillar of TPM (Autonomous Maintenance). | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 29,2 h | Einfache Extraktion |
—Doser/Cutter and PackerWörtliches Zitat anzeigen (Conclusion)The number of stops due to machinery breakdowns and human errors was reduced, resulting in the optimization of the values of the MTBF MTTR indicators from 29.23 to 34.94 and from 7.72 to 8.72, respectively, with the application of the first pillar of TPM (Autonomous Maintenance). | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 7,72 h | Einfache Extraktion |
—Doser/Cutter and PackerWörtliches Zitat anzeigen (Conclusion)The number of stops due to machinery breakdowns and human errors was reduced, resulting in the optimization of the values of the MTBF MTTR indicators from 29.23 to 34.94 and from 7.72 to 8.72, respectively, with the application of the first pillar of TPM (Autonomous Maintenance). | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 34,9 h | Einfache Extraktion |
—Doser/Cutter and PackerWörtliches Zitat anzeigen (Conclusion)The number of stops due to machinery breakdowns and human errors was reduced, resulting in the optimization of the values of the MTBF MTTR indicators from 29.23 to 34.94 and from 7.72 to 8.72, respectively, with the application of the first pillar of TPM (Autonomous Maintenance). | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 8,72 h | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 4)147.54 15 23 63.22 84.32 | Rüsten und Einstellen | Verlustzeit | 148 min | Einfache Extraktion |
Internal activitiesWörtliches Zitat anzeigen (Table 4)147.54 15 23 63.22 84.32 | Rüsten und Einstellen | Anzahl der Ereignisse | 15,0 events | Einfache Extraktion |
External activitiesWörtliches Zitat anzeigen (Table 4)147.54 15 23 63.22 84.32 | Rüsten und Einstellen | Anzahl der Ereignisse | 23,0 events | Einfache Extraktion |
Internal activitiesWörtliches Zitat anzeigen (Table 4)147.54 15 23 63.22 84.32 | Rüsten und Einstellen | Verlustzeit | 63,2 min | Einfache Extraktion |
External activitiesWörtliches Zitat anzeigen (Table 4)147.54 15 23 63.22 84.32 | Rüsten und Einstellen | Verlustzeit | 84,3 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 5)138.14 9 29 40.72 97.42 | Rüsten und Einstellen | Verlustzeit | 138 min | Einfache Extraktion |
Internal activitiesWörtliches Zitat anzeigen (Table 5)138.14 9 29 40.72 97.42 | Rüsten und Einstellen | Anzahl der Ereignisse | 9,00 events | Einfache Extraktion |
External activitiesWörtliches Zitat anzeigen (Table 5)138.14 9 29 40.72 97.42 | Rüsten und Einstellen | Anzahl der Ereignisse | 29,0 events | Einfache Extraktion |
Internal activitiesWörtliches Zitat anzeigen (Table 5)138.14 9 29 40.72 97.42 | Rüsten und Einstellen | Verlustzeit | 40,7 min | Einfache Extraktion |
External activitiesWörtliches Zitat anzeigen (Table 5)138.14 9 29 40.72 97.42 | Rüsten und Einstellen | Verlustzeit | 97,4 min | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 4.3.2 Phase 4)At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively. | Rüsten und Einstellen | Verlustzeit | 106 min | Einfache Extraktion |
External activitiesWörtliches Zitat anzeigen (Section 4.3.2 Phase 4)At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively. | Rüsten und Einstellen | Anzahl der Ereignisse | 25,0 events | Einfache Extraktion |
Internal activitiesWörtliches Zitat anzeigen (Section 4.3.2 Phase 4)At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively. | Rüsten und Einstellen | Verlustzeit | 25,6 min | Einfache Extraktion |
External activitiesWörtliches Zitat anzeigen (Section 4.3.2 Phase 4)At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively. | Rüsten und Einstellen | Verlustzeit | 80,1 min | Einfache Extraktion |
Hours of factual preventive maintenance - Month 1Wörtliches Zitat anzeigen (Table 7)Month 1 14.00 25.00 11.00 | Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage) | Verlustzeit | 25,0 h | Einfache Extraktion |
Extra hours - Month 1Wörtliches Zitat anzeigen (Table 7)Month 1 14.00 25.00 11.00 | Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage) | Verlustzeit | 11,0 h | Einfache Extraktion |
Hours of factual preventive maintenance - Month 2Wörtliches Zitat anzeigen (Table 7)Month 2 12.00 20.00 8.00 | Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage) | Verlustzeit | 20,0 h | Einfache Extraktion |
Extra hours - Month 2Wörtliches Zitat anzeigen (Table 7)Month 2 12.00 20.00 8.00 | Geplanter Stillstand (geplante Instandhaltung, Pausen, keine Nachfrage) | Verlustzeit | 8,00 h | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.3.3)performance (94.86%) and quality (95.19%) | none | Leistung | 94,9 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Section 3.3.3)quality (95.19%) | none | Qualität | 95,2 % | Einfache Extraktion |
Breakdowns in the MachineryPacker, Doser/CutterWörtliches Zitat anzeigen (Table 9, Pilot test on the leading causes of unplanned shutdowns)Breakdowns in the Machinery 12.20% | Anlagenausfall (Störungen) | Anteil an den Verlustereignissen | 12,2 % | Einfache Extraktion |
Breakdowns due to human errors in calibration or operationWörtliches Zitat anzeigen (Table 9, Pilot test on the leading causes of unplanned shutdowns)Breakdowns due to human errors in calibration or operation 8.47% | Anlagenausfall (Störungen) | Anteil an den Verlustereignissen | 8,47 % | Einfache Extraktion |
Beobachtungseinheiten
- Confectionery line · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
- Confectionery line · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Critical machines (Doser/Cutter and Packer) · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Critical machines (Doser/Cutter and Packer) · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
- Confectionery line (SMED setup activities) · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Confectionery line (SMED setup activities) · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
- Confectionery line (preventive maintenance, pilot test) · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention

