Changeover / setup time
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 11 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 66 % der Verlustzeit der Linie. Berichtet von 33 der 127 Studien, die sie beobachten konnten (starke Evidenz).
Was passiert
Time is lost between the last good unit of one production run and the first good unit of the next while the line is stopped or run at non-production rate to change product, format, tooling or recipe, including cleaning, warm-up and the restart ramp after a cold start. The duration depends on the complexity of the mechanical, electrical and process adjustments required and on how standardized or manual the changeover procedure is.
Was man dagegen tut
Apply SMED methodology to separate internal from external setup tasks, standardize and pre-stage tools, parts and recipes, and use quick-change fixtures or format parts to reduce manual adjustment. Train operators on documented standard changeover sequences and track changeover duration as a key performance indicator to drive continuous improvement.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 11 % [6–17 %]
- Erwarteter Anteil an der Verlustzeit
- 7,0 % [3,7–11,6 %]
- Anteil an der Verlustzeit bei Auftreten
- 66 % [58–74 %]
- Studien / Einheiten
- 127 / 161
- Evidenzgrad
- A
Grad A: 10 oder mehr Studien und 10 oder mehr verschiedene Linien, mit einem 95-%-Glaubwürdigkeitsintervall schmaler als 0,20.
2Wahrscheinlichkeit nach Segment
- Milchprodukte24 % [10–43 %]13 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte11 % [5–20 %]26 Studien
- Bier, Wein und Spirituosen14 % [5–29 %]11 Studien
- Backwaren und Teigwaren11 % [4–21 %]24 Studien
- Fleisch, Geflügel und Fisch10 % [3–23 %]9 Studien
- Obst- und Gemüseverarbeitung15 % [4–33 %]7 Studien
- Getreide- und Ölsaatenmüllerei8,8 % [2,2–21,7 %]6 Studien
- Zucker und Süßwaren16 % [5–31 %]9 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel11 % [3–26 %]5 Studien
- Futtermittel und Heimtiernahrung11 % [3–24 %]7 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)15 % [4–32 %]10 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseTime is lost between the last good unit of one production run and the first good unit of the next while the line is stopped or run at non-production rate to change product, format, tooling or recipe, including cleaning, warm-up and the restart ramp after a cold start. The duration depends on the complexity of the mechanical, electrical and process adjustments required and on how standardized or manual the changeover procedure is.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseExtended machine-state intervals in a non-running or manual/setup mode between the last cycle of one SKU and the first cycle of the next, with order or recipe change events bracketing the stop, flat production counters, and absence of fault alarms distinguishing it from unplanned downtime. Repeated changeover events correlate with product or format code transitions logged in MES.
Gegenmaßnahme
Ingenieurpraktische HinweiseApply SMED methodology to separate internal from external setup tasks, standardize and pre-stage tools, parts and recipes, and use quick-change fixtures or format parts to reduce manual adjustment. Train operators on documented standard changeover sequences and track changeover duration as a key performance indicator to drive continuous improvement.
4Quellen
- Analisis Efektivitas Mesin pada Divisi Pengalengan Jamur Di PT XYZ Menggunakan Metode Overall Equipment Effectiveness (2019)Quelle öffnenAnteil an der geplanten Zeit: 9,30 % · laut Bericht: “Setup & Adjustment Losses”
Wörtliches Zitat anzeigen
Rata-Rata 0,099271 9,29814 30,74813 0,00000 0,00000 0,13414
- Analisis Efektivitas Mesin pada Divisi Pengalengan Jamur Di PT XYZ Menggunakan Metode Overall Equipment Effectiveness (2019)Quelle öffnenAnteil an der Verlustzeit: 23,1 % · laut Bericht: “Setup & Adjustment Losses”
Wörtliches Zitat anzeigen
Dapat dilihat di grafik bahwa nilai losses terbesar ada pada idle & minor stoppages losses dan setup & adjustment losses yang mewakili 76,34% dan 23,08% dari total losses perusahaan, hal ini tentu saja harus diperbaiki.
- Optimización de los tiempos de operación del área de envasado de yogurt en industrias lácteas Toni S.A. (2018)Quelle öffnenVerlustzeit: 34,0 min · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
el tiempo total empleado fue de 34 minutos 0 segundos, realizándose un total de 36 actividades, las actividades que se realizan respecto a esta máquina son principalmente del tipo Operación.
- Optimización de los tiempos de operación del área de envasado de yogurt en industrias lácteas Toni S.A. (2018)Quelle öffnenAnzahl der Ereignisse: 36,0 activities · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
el tiempo total empleado fue de 34 minutos 0 segundos, realizándose un total de 36 actividades, las actividades que se realizan respecto a esta máquina son principalmente del tipo Operación.
- Optimización de los tiempos de operación del área de envasado de yogurt en industrias lácteas Toni S.A. (2018)Quelle öffnenVerlustzeit: 54,0 min · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
El tiempo total empleado para la realización de todas las actividades que comprenden el cambio de formato fue de 54 minutos 0 segundos, realizándose un total de 65 actividades, siendo la máquina con la mayor cantidad de actividades realizadas en comparación con la Fogg, Karlville y Edos.
- Optimización de los tiempos de operación del área de envasado de yogurt en industrias lácteas Toni S.A. (2018)Quelle öffnenAnzahl der Ereignisse: 65,0 activities · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
El tiempo total empleado para la realización de todas las actividades que comprenden el cambio de formato fue de 54 minutos 0 segundos, realizándose un total de 65 actividades, siendo la máquina con la mayor cantidad de actividades realizadas en comparación con la Fogg, Karlville y Edos.
- Optimización de los tiempos de operación del área de envasado de yogurt en industrias lácteas Toni S.A. (2018)Quelle öffnenVerlustzeit: 21,0 min · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
El tiempo total propuesto para el cambio de formato se acortó en un 4,76%, de 21 a 20 minutos, respecto al de las videograbaciones.
- Optimización de los tiempos de operación del área de envasado de yogurt en industrias lácteas Toni S.A. (2018)Quelle öffnenAnzahl der Ereignisse: 37,0 activities · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
en el cual se disminuyeron las actividades en gran medida, de 37 a 7, la mayoría operativa.
- Optimización de los tiempos de operación del área de envasado de yogurt en industrias lácteas Toni S.A. (2018)Quelle öffnenVerlustzeit: 20,0 min · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
El tiempo total propuesto para el cambio de formato se acortó en un 4,76%, de 21 a 20 minutos, respecto al de las videograbaciones.
- Optimización de los tiempos de operación del área de envasado de yogurt en industrias lácteas Toni S.A. (2018)Quelle öffnenAnzahl der Ereignisse: 7,00 activities · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
en el cual se disminuyeron las actividades en gran medida, de 37 a 7, la mayoría operativa.
- Optimizing beverage manufacturing: integrating lean manufacturing and machine learning to enhance efficiency and reduce waste (2025)Quelle öffnenVerlustzeit: 42,0 min · laut Bericht: “Line changeover”
Wörtliches Zitat anzeigen
Line change time | Average | 42 | 16
- Optimizing beverage manufacturing: integrating lean manufacturing and machine learning to enhance efficiency and reduce waste (2025)Quelle öffnenVerlustzeit: 16,0 min · laut Bericht: “Line changeover”
Wörtliches Zitat anzeigen
Line change time | Average | 42 | 16
- Enhancing operational efficiency in craft beer production: implementation of lean manufacturing and TPM methodologies in SMES (2025)Quelle öffnenVerlustzeit: 41,0 min · laut Bericht: “Setup time”
Wörtliches Zitat anzeigen
Setup time was reduced from 41 to 29 minutes, representing a 29% decrease.
- Enhancing operational efficiency in craft beer production: implementation of lean manufacturing and TPM methodologies in SMES (2025)Quelle öffnenVerlustzeit: 29,0 min · laut Bericht: “Setup time”
Wörtliches Zitat anzeigen
Setup time was reduced from 41 to 29 minutes, representing a 29% decrease.
- Investigation on a multiscale sustainable manufacturing approach to production changeover complexity reduction and its implementation through smart surfaces and process optimization (2022)Quelle öffnenAnteil an der Verlustzeit: 16,5 % · laut Bericht: “Change Over”
Wörtliches Zitat anzeigen
Change Over 55 16.50%
- Investigation on a multiscale sustainable manufacturing approach to production changeover complexity reduction and its implementation through smart surfaces and process optimization (2022)Quelle öffnenVerlustzeit: 55,0 min · laut Bericht: “Set up and Change Over”
Wörtliches Zitat anzeigen
Set up and Change Over 27 28 55
- Anteil an der geplanten Zeit: 20,0 % · laut Bericht: “Tip dönüşüm süreleri”
Wörtliches Zitat anzeigen
Tip dönüşüm sürelerinin tüm üretim zamanının %20’sini oluşturduğu gözlemlenmiştir.
- Verlustzeit: 300 dk · laut Bericht: “Toplam Tip Dönüş Süresi”
Wörtliches Zitat anzeigen
Toplam Tip Dönüş Süresi 300 325 120 300 460 400 540
- Verlustzeit: 325 dk · laut Bericht: “Toplam Tip Dönüş Süresi”
Wörtliches Zitat anzeigen
Toplam Tip Dönüş Süresi 300 325 120 300 460 400 540
- Verlustzeit: 120 dk · laut Bericht: “Toplam Tip Dönüş Süresi”
Wörtliches Zitat anzeigen
Toplam Tip Dönüş Süresi 300 325 120 300 460 400 540
- Verlustzeit: 460 dk · laut Bericht: “Toplam Tip Dönüş Süresi”
Wörtliches Zitat anzeigen
Toplam Tip Dönüş Süresi 300 325 120 300 460 400 540
- Verlustzeit: 400 dk · laut Bericht: “Toplam Tip Dönüş Süresi”
Wörtliches Zitat anzeigen
Toplam Tip Dönüş Süresi 300 325 120 300 460 400 540
- Verlustzeit: 540 dk · laut Bericht: “Toplam Tip Dönüş Süresi”
Wörtliches Zitat anzeigen
Toplam Tip Dönüş Süresi 300 325 120 300 460 400 540
- Verlustzeit: 1.230 dk · laut Bericht: “Toplam tip dönüştürme süresi”
Wörtliches Zitat anzeigen
Toplam tip dönüştürme süresi 1230 dk
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Quelle öffnenVerlustzeit: 25,6 min · laut Bericht: “Internal activities time (final)”
Wörtliches Zitat anzeigen
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Quelle öffnenVerlustzeit: 148 min · laut Bericht: “Total production time of changeover activities”
Wörtliches Zitat anzeigen
147.54 15 23 63.22 84.32
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Quelle öffnenAnzahl der Ereignisse: 15,0 events · laut Bericht: “Internal activities”
Wörtliches Zitat anzeigen
147.54 15 23 63.22 84.32
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Quelle öffnenAnzahl der Ereignisse: 23,0 events · laut Bericht: “External activities”
Wörtliches Zitat anzeigen
147.54 15 23 63.22 84.32
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Quelle öffnenVerlustzeit: 63,2 min · laut Bericht: “Internal activities time”
Wörtliches Zitat anzeigen
147.54 15 23 63.22 84.32
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Quelle öffnenVerlustzeit: 84,3 min · laut Bericht: “External activities time”
Wörtliches Zitat anzeigen
147.54 15 23 63.22 84.32
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Quelle öffnenVerlustzeit: 106 min · laut Bericht: “Final process time after SMED implementation”
Wörtliches Zitat anzeigen
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Quelle öffnenAnzahl der Ereignisse: 25,0 events · laut Bericht: “External activities (final)”
Wörtliches Zitat anzeigen
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
- Enhancing Machinery Availability in a Food Company: An Integrated Approach Using TPM, SMED, and RCM Methodologies (2024)Quelle öffnenVerlustzeit: 80,1 min · laut Bericht: “External activities time (final)”
Wörtliches Zitat anzeigen
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
- Anzahl der Ereignisse: 15,0 changeovers/month · laut Bericht: “changeover”
Wörtliches Zitat anzeigen
Machines operating the line had, on average, 15 changeovers/month, each taking significant times.
- Anzahl der Ereignisse: 19,0 changeovers/month · laut Bericht: “changeover”
Wörtliches Zitat anzeigen
The number of machines in lines 1, 2, 3 and 4/5 was respectively 5, 10, 9 and 12, while changeovers per month in the same lines were on average 19, 28, 22 and 35.
- Anzahl der Ereignisse: 28,0 changeovers/month · laut Bericht: “changeover”
Wörtliches Zitat anzeigen
The number of machines in lines 1, 2, 3 and 4/5 was respectively 5, 10, 9 and 12, while changeovers per month in the same lines were on average 19, 28, 22 and 35.
- Anzahl der Ereignisse: 22,0 changeovers/month · laut Bericht: “changeover”
Wörtliches Zitat anzeigen
The number of machines in lines 1, 2, 3 and 4/5 was respectively 5, 10, 9 and 12, while changeovers per month in the same lines were on average 19, 28, 22 and 35.
- Anzahl der Ereignisse: 35,0 changeovers/month · laut Bericht: “changeover”
Wörtliches Zitat anzeigen
The number of machines in lines 1, 2, 3 and 4/5 was respectively 5, 10, 9 and 12, while changeovers per month in the same lines were on average 19, 28, 22 and 35.
- Anteil an der Verlustzeit: 7,60 % · laut Bericht: “SMED (changeover) time reduction”
Wörtliches Zitat anzeigen
Latest fine-tuning in 2012 decreased SMED time for 7.6% or 3473 minutes
- Anteil an der Verlustzeit: 36,0 % · laut Bericht: “Setup”
Wörtliches Zitat anzeigen
verificou-se que as paradas do equipamento Klockner representa 30% de todos estes desperdício e que 36 % estão relacionadas com set ups e 34% são relativas a outro problemas.
- Verlustzeit: 2,00 min · laut Bericht: “Separate necessary keys for setup”
Wörtliches Zitat anzeigen
1 Separar as chaves necessárias para setup 00:00:00 00:02:00 00:02:00 00:02:00 -
- Verlustzeit: 2,00 min · laut Bericht: “Fetch test bottles”
Wörtliches Zitat anzeigen
2 Buscar garrafas testes 00:02:00 00:04:00 00:02:00 00:02:00 -
- Verlustzeit: 13,0 min · laut Bericht: “Adjust flaps”
Wörtliches Zitat anzeigen
5 Ajuste das aletas 00:45:00 00:58:00 00:13:00 00:13:00 -
- Verlustzeit: 18,0 min · laut Bericht: “Adjust pneumatic classifier”
Wörtliches Zitat anzeigen
6 Ajuste no classificador pneumáti co 00:58:00 01:16:00 00:18:00 00:18:00 -
- Verlustzeit: 6,00 min · laut Bericht: “Adjust film reading sensor”
Wörtliches Zitat anzeigen
8 Ajuste no sensor de leitura do filme 01:23:00 01:29:00 00:06:00 00:06:00 -
- Verlustzeit: 5,00 min · laut Bericht: “Set pusher chain to zero point”
Wörtliches Zitat anzeigen
11 Colocar a cadeia empurradora no ponto zero 01:35:00 01:40:00 00:05:00 00:05:00 -
- Verlustzeit: 2,00 min · laut Bericht: “Disengage table regulator”
Wörtliches Zitat anzeigen
12 Desacoplar regulador da mesa 01:40:00 01:42:00 00:02:00 00:02:00 -
- Verlustzeit: 6,00 min · laut Bericht: “Set wrapping chain to zero point”
Wörtliches Zitat anzeigen
13 Colocar cadeia de envolvimento ponto zero 01:42:00 01:48:00 00:06:00 00:06:00 -
- Verlustzeit: 2,00 min · laut Bericht: “Get 250 ml dividers (verandas)”
Wörtliches Zitat anzeigen
14 Pegar varandas de 250 ml 01:48:00 01:50:00 00:02:00 00:02:00 -
- Verlustzeit: 4,00 min · laut Bericht: “Change dividers position”
Wörtliches Zitat anzeigen
15 Trocar posição de varandas 01:50:00 01:54:00 00:04:00 00:04:00 -
- Verlustzeit: 10,0 min · laut Bericht: “Get film for 250 ml”
Wörtliches Zitat anzeigen
16 Pegar filme para 250 ml 01:54:00 02:04:00 00:10:00 00:10:00 -
- Verlustzeit: 4,00 min · laut Bericht: “Change film from 2 liters to 250 ml”
Wörtliches Zitat anzeigen
17 Trocar filme de 2 litros para 250 ml 02:04:00 02:08:00 00:04:00 00:04:00 -
- Verlustzeit: 4,00 min · laut Bericht: “Test machine”
Wörtliches Zitat anzeigen
18 Testar máquina 02:08:00 02:12:00 00:04:00 00:04:00 -
- Verlustzeit: 3,00 min · laut Bericht: “Organize tools used in setup”
Wörtliches Zitat anzeigen
19 Organizar chaves usadas no set up 02:12:00 02:15:00 00:03:00 00:03:00 -
- Verlustzeit: 3,00 min · laut Bericht: “Adjust flaps”
Wörtliches Zitat anzeigen
4 Ajuste das aletas 00:07:00 00:10:00 00:03:00 00:03:00 -
- Verlustzeit: 4,00 min · laut Bericht: “Adjust pneumatic classifier”
Wörtliches Zitat anzeigen
5 Ajuste no classificador pneumático 00:10:00 00:14:00 00:04:00 00:04:00 -
- Verlustzeit: 1,00 min · laut Bericht: “Adjust film reading sensor”
Wörtliches Zitat anzeigen
7 Ajuste no sensor de leitura do filme 00:15:00 00:16:00 00:01:00 00:01:00 -
- Verlustzeit: 2,00 min · laut Bericht: “Set pusher chain to zero point”
Wörtliches Zitat anzeigen
9 Colocar a cadeia empurradora no ponto zero 00:17:00 00:19:00 00:02:00 00:02:00 -
- Verlustzeit: 1,00 min · laut Bericht: “Disengage wrapping table regulator”
Wörtliches Zitat anzeigen
10 Desacoplar regulador mesa de envolvi mento 00:19:00 00:20:00 00:01:00 00:01:00 -
- Verlustzeit: 1,00 min · laut Bericht: “Set wrapping chain to zero point”
Wörtliches Zitat anzeigen
11 Colocar cadeia envolvimento no ponto zero 00:20:00 00:21:00 00:01:00 00:01:00 -
- Verlustzeit: 1,00 min · laut Bericht: “Get 250 ml dividers (verandas)”
Wörtliches Zitat anzeigen
12 Pegar varandas de 250 ml 00:21:00 00:22:00 00:01:00 - 00:01:00
- Verlustzeit: 1,00 min · laut Bericht: “Change dividers position”
Wörtliches Zitat anzeigen
13 Trocar posição de varandas 00:22:00 00:23:00 00:01:00 00:01:00 -
- Verlustzeit: 2,00 min · laut Bericht: “Get film for 250 ml”
Wörtliches Zitat anzeigen
14 Pegar filme para 250 ml 00:23:00 00:25:00 00:02:00 - 00:02:00
- Verlustzeit: 4,00 min · laut Bericht: “Change film from 2 liters to 250 ml”
Wörtliches Zitat anzeigen
15 Trocar filme de 2 litros para 250 ml 00:25:00 00:29:00 00:04:00 00:04:00 -
- Verlustzeit: 8,00 min · laut Bericht: “Clean the equipment”
Wörtliches Zitat anzeigen
17 Limpeza do equipamento 00:32:00 00:40:00 00:08:00 00:08:00 -
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Quelle öffnenVerlustzeit: 992 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
Juni 992 2.171 6.164
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Quelle öffnenVerlustzeit: 980 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
Mei 980 6.341 4.452
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Quelle öffnenVerlustzeit: 1.599 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
April 1.599 8.680 5.376
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Quelle öffnenVerlustzeit: 1.957 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
Maret 1.957 14.278 1.707
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Quelle öffnenVerlustzeit: 2.051 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
Februari 2.051 10.424 1.098
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Quelle öffnenVerlustzeit: 1.278 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
Januari 1.278 13.731 929
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Quelle öffnenVerlustzeit: 986 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
Desember 986 9.274 9.307
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Quelle öffnenVerlustzeit: 1.687 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
Oktober 1.687 8.213 15.131
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Quelle öffnenVerlustzeit: 1.120 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
Agustus 1.120 6.057 16.715
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Quelle öffnenVerlustzeit: 1.025 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
Juli 1.025 8.963 14.174
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Quelle öffnenVerlustzeit: 1.768 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
September 1.768 12.412 9.943
- IMPLEMENTASI 5R+1S SEBAGAI UPAYA PENINGKATAN EFEKTIVITAS PRODUKSI DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. COCA-COLA BOTTLING INDONESIA (2018)Quelle öffnenVerlustzeit: 788 menit · laut Bericht: “Set up”
Wörtliches Zitat anzeigen
November 788 12.512 9.670
- Verlustzeit: 103 min · laut Bericht: “Bottle size changeover”
Wörtliches Zitat anzeigen
Entre 2015 e 2017, a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula duravam em média 102,5 minutos, 119,4 minutos e 151,8 minutos respetivamente
- Verlustzeit: 119 min · laut Bericht: “Capsule type changeover”
Wörtliches Zitat anzeigen
Entre 2015 e 2017, a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula duravam em média 102,5 minutos, 119,4 minutos e 151,8 minutos respetivamente
- Verlustzeit: 152 min · laut Bericht: “Bottle size and capsule type changeover”
Wörtliches Zitat anzeigen
Entre 2015 e 2017, a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula duravam em média 102,5 minutos, 119,4 minutos e 151,8 minutos respetivamente
- Anteil an der Verlustzeit: 23,8 % · laut Bericht: “Bottle size changeover”
Wörtliches Zitat anzeigen
as mudanças que resultam na maior percentagem de tempo improdutivo são as mudanças de tara, de cápsula e de ambas em simultâneo, sem que haja mudança de cerveja, representando um peso percentual de 23,8%, 23,7% e 16,7% respetivamente
- Anteil an der Verlustzeit: 23,7 % · laut Bericht: “Capsule type changeover”
Wörtliches Zitat anzeigen
as mudanças que resultam na maior percentagem de tempo improdutivo são as mudanças de tara, de cápsula e de ambas em simultâneo, sem que haja mudança de cerveja, representando um peso percentual de 23,8%, 23,7% e 16,7% respetivamente
- Anteil an der Verlustzeit: 16,7 % · laut Bericht: “Bottle size and capsule type changeover”
Wörtliches Zitat anzeigen
as mudanças que resultam na maior percentagem de tempo improdutivo são as mudanças de tara, de cápsula e de ambas em simultâneo, sem que haja mudança de cerveja, representando um peso percentual de 23,8%, 23,7% e 16,7% respetivamente
- Verlustzeit: 42,0 min · laut Bericht: “Bottle size changeover”
Wörtliches Zitat anzeigen
Considera-se que a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula, após as melhorias desenvolvidas no projeto, passam a durar em média 42, 55 e 84 minutos (ver secção 4.6)
- Verlustzeit: 55,0 min · laut Bericht: “Capsule type changeover”
Wörtliches Zitat anzeigen
Considera-se que a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula, após as melhorias desenvolvidas no projeto, passam a durar em média 42, 55 e 84 minutos (ver secção 4.6)
- Verlustzeit: 84,0 min · laut Bericht: “Bottle size and capsule type changeover”
Wörtliches Zitat anzeigen
Considera-se que a mudança de tara, a mudança de cápsula e a mudança de tara e cápsula, após as melhorias desenvolvidas no projeto, passam a durar em média 42, 55 e 84 minutos (ver secção 4.6)
- CHANGEOVER TIME REDUCTION THROUGH LEAN TOOL “SMED” – A CASE STUDY FROM FOOD SECTOR (2018)Quelle öffnenAnteil an der Verlustzeit: 83,0 % · laut Bericht: “Internal activities”
Wörtliches Zitat anzeigen
Internal activities occupied 83% of the total time.
- CHANGEOVER TIME REDUCTION THROUGH LEAN TOOL “SMED” – A CASE STUDY FROM FOOD SECTOR (2018)Quelle öffnenAnteil an der Verlustzeit: 77,0 % · laut Bericht: “Changeovers”
Wörtliches Zitat anzeigen
Changeovers on a particular selected line then account for a total of 77% of all planned stoppages on this line.
- CHANGEOVER TIME REDUCTION THROUGH LEAN TOOL “SMED” – A CASE STUDY FROM FOOD SECTOR (2018)Quelle öffnenAnteil an der Verlustzeit: 17,0 % · laut Bericht: “External activities”
Wörtliches Zitat anzeigen
internal; 83% external; 17% breakdown; 6% Figure 9 Internal vs external activities. Source: own
- Perancangan Ulang Mesin Pengaduk Sari Pati dengan Metode Reverse Engineering(Studi Kasus: UKM Pembuat Mie Soun Cap “Burung Sriti” Tulung, Klaten) (2017)Quelle öffnenVerlustzeit: 7,00 min · laut Bericht: “set up time”
Wörtliches Zitat anzeigen
The result of the old machine indicate the set up time consuming about 7 minutes
- Aplicación de metodología SMED para reducir tiempos de cambio en formato de la línea de embotellado Grupo Bebidas Refrigerantes S.A. (2018)Quelle öffnenMittlere Ereignisdauer: 0,870 h · laut Bericht: “format change”
Wörtliches Zitat anzeigen
reducing the time in change from 1.5 hours to 0.87 hours
- Aplicación de metodología SMED para reducir tiempos de cambio en formato de la línea de embotellado Grupo Bebidas Refrigerantes S.A. (2018)Quelle öffnenMittlere Ereignisdauer: 1,50 h · laut Bericht: “format change”
Wörtliches Zitat anzeigen
reducing the time in change from 1.5 hours to 0.87 hours
- Aplicación de metodología SMED para reducir tiempos de cambio en formato de la línea de embotellado Grupo Bebidas Refrigerantes S.A. (2018)Quelle öffnenAnteil an der Verlustzeit: 42,2 % · laut Bericht: “format change”
Wörtliches Zitat anzeigen
reduction in the times of the format change up to 42.22%
- Aplicación de metodología SMED para reducir tiempos de cambio en formato de la línea de embotellado Grupo Bebidas Refrigerantes S.A. (2018)Quelle öffnenVerlustzeit: 84,7 hours · laut Bericht: “format change”
Wörtliches Zitat anzeigen
When implementing the SMED methodology in the months of July to December, a time of 84.7 hours was increased
- Implantación de Herramientas Industriales para la Optimización del Proceso Industrial Lácteo-Fermentado (2019)Quelle öffnenVerlustzeit: 16,1 Ton · laut Bericht: “Cambio de Sabor”
Wörtliches Zitat anzeigen
reducir de 22.9 a 16.1 toneladas un 30.2% por las causas de cambios de sabor, plásticos equivocados y falta de material en línea
- Implantación de Herramientas Industriales para la Optimización del Proceso Industrial Lácteo-Fermentado (2019)Quelle öffnenVerlustzeit: 22,9 Ton · laut Bericht: “Cambio de Sabor”
Wörtliches Zitat anzeigen
reducir de 22.9 a 16.1 toneladas un 30.2% por las causas de cambios de sabor, plásticos equivocados y falta de material en línea
- Anteil an der geplanten Zeit: 28,0 % · laut Bericht: “changeovers”
Wörtliches Zitat anzeigen
Changeovers consumed 536 hours (28%), while machine breakdowns totalled 485 hours (25%).
- Verlustzeit: 536 h · laut Bericht: “changeovers”
Wörtliches Zitat anzeigen
Changeovers consumed 536 hours (28%), while machine breakdowns totalled 485 hours (25%).
- Mittlere Ereignisdauer: 66,1 min · laut Bericht: “Product Exchange (Refrigerant)”
Wörtliches Zitat anzeigen
Product Exchange (Refrigerant) 66.1 27.0 59.1
- Mittlere Ereignisdauer: 19,7 min · laut Bericht: “Product Exchange (Beer)”
Wörtliches Zitat anzeigen
Product Exchange (Beer) 19.7 6.0 69.5
- Mittlere Ereignisdauer: 89,3 min · laut Bericht: “Format Exchange (Hs Mp For P12p)”
Wörtliches Zitat anzeigen
Format Exchange (Hs Mp For P12p) 89.3 35.9 59.8
- Mittlere Ereignisdauer: 27,0 min · laut Bericht: “Product Exchange (Refrigerant)”
Wörtliches Zitat anzeigen
Product Exchange (Refrigerant) 66.1 27.0 59.1
- Mittlere Ereignisdauer: 6,00 min · laut Bericht: “Product Exchange (Beer)”
Wörtliches Zitat anzeigen
Product Exchange (Beer) 19.7 6.0 69.5
- Mittlere Ereignisdauer: 35,9 min · laut Bericht: “Format Exchange (Hs Mp For P12p)”
Wörtliches Zitat anzeigen
Format Exchange (Hs Mp For P12p) 89.3 35.9 59.8
- Analisis Efektivitas Mesin pada Divisi Pengalengan Jamur Di PT. Suryajaya Abadiperkasa Menggunakan Metode Overall Equipment Effectiveness (2020)Quelle öffnenAnteil an der Verlustzeit: 9,30 % · laut Bericht: “Setup & Adjustment Losses”
Wörtliches Zitat anzeigen
Rata-Rata 0,099271 9,29814 30,74813 0,00000 0,00000 0,13414
- Analisis Efektivitas Mesin pada Divisi Pengalengan Jamur Di PT. Suryajaya Abadiperkasa Menggunakan Metode Overall Equipment Effectiveness (2020)Quelle öffnenAnteil an der Verlustzeit: 23,1 % · laut Bericht: “Setup & Adjustment Losses”
Wörtliches Zitat anzeigen
nilai losses terbesar ada pada idle & minor stoppages losses dan setup & adjustment losses yang mewakili 76,34% dan 23,08% dari total losses perusahaan
- Analisis Total Productive Maintenance Mesin Wrapping Line 4 Menggunkan Overall Equipment Effectiveness dan Six Big Losses di PT XY, Cirebon - Jawa Barat (2020)Quelle öffnenAnteil an der Verlustzeit: 0 % · laut Bericht: “Setup and Adjustment Losses”
Wörtliches Zitat anzeigen
Setup and Adjustment Losses 0% 0% 100%
- Maintenance Performance Evaluation and Downtime Analysis of Manufacturing Equipment in a Food Manufacturing Company (2021)Quelle öffnenVerlustzeit: 1.797 min · laut Bericht: “Miscellaneous activities”
Wörtliches Zitat anzeigen
Miscellaneous activities 1797 1.71 100.00
- Maintenance Performance Evaluation and Downtime Analysis of Manufacturing Equipment in a Food Manufacturing Company (2021)Quelle öffnenAnteil an der Verlustzeit: 1,71 % · laut Bericht: “Miscellaneous activities”
Wörtliches Zitat anzeigen
Miscellaneous activities 1797 1.71 100.00
- Mittlere Ereignisdauer: 156 min · laut Bericht: “setup operation”
Wörtliches Zitat anzeigen
Before the intervention, the time to conclude a setup operation was approximately 156 minutes. After the intervention, it was reduced to approximately 104 minutes.
- Mittlere Ereignisdauer: 104 min · laut Bericht: “setup operation”
Wörtliches Zitat anzeigen
Before the intervention, the time to conclude a setup operation was approximately 156 minutes. After the intervention, it was reduced to approximately 104 minutes.
- Mittlere Ereignisdauer: 45,0 s · laut Bericht: “Changeover for new batch”
Wörtliches Zitat anzeigen
The changeover time reduced from 94 second to 45 second per changeover.
- Anzahl der Ereignisse: 15,0 changeover/Month · laut Bericht: “Changeover for new batch”
Wörtliches Zitat anzeigen
Number of changeover per month = 15 changeover/Month.
- Mittlere Ereignisdauer: 94,0 min · laut Bericht: “Changeover for new batch”
Wörtliches Zitat anzeigen
Changeover time is calculated with 94 min.
- Verlustzeit: 1.410 Minutes · laut Bericht: “Changeover for new batch”
Wörtliches Zitat anzeigen
Changeover for new batch 1410 Waiting
- Verlustzeit: 45,0 ton · laut Bericht: “Changeover for new batch”
Wörtliches Zitat anzeigen
Average waste Per Month (Ton/Month) 45
- Peningkatan Overall Equipment Effectiveness (OEE) dengan Pendekatan Total Productive Maintenance (TPM) di Line X PT Kraft Ultrajaya Indonesia (2023)Quelle öffnenAnteil an der Verlustzeit: 5,00 % · laut Bericht: “Setup and Adjustment”
Wörtliches Zitat anzeigen
the loss factors that affect the OEE line X value are Idling and Minor Stoppage with a percentage of 8%, Setup and Adjustment with a percentage of 5%, Defect Amount with a percentage of 4%.
- Application of Lean-Total Productive Maintenance Tools to Reduce Setup Times and Machine Stoppages on the Molding Line of an SME in the Food Industry (2023)Quelle öffnenVerlustzeit: 254 min · laut Bericht: “Duration of internal activities”
Wörtliches Zitat anzeigen
From the data collection of the total duration of mold change times, a total of 280 minutes on average was obtained, and the times of internal activities, 254 min, and external activities, 26 min.
- Application of Lean-Total Productive Maintenance Tools to Reduce Setup Times and Machine Stoppages on the Molding Line of an SME in the Food Industry (2023)Quelle öffnenVerlustzeit: 26,0 min · laut Bericht: “Duration of external activities”
Wörtliches Zitat anzeigen
From the data collection of the total duration of mold change times, a total of 280 minutes on average was obtained, and the times of internal activities, 254 min, and external activities, 26 min.
- Application of Lean-Total Productive Maintenance Tools to Reduce Setup Times and Machine Stoppages on the Molding Line of an SME in the Food Industry (2023)Quelle öffnenMittlere Ereignisdauer: 280 min · laut Bericht: “mold change”
Wörtliches Zitat anzeigen
From the data collection of the total duration of mold change times, a total of 280 minutes on average was obtained
- Application of Lean-Total Productive Maintenance Tools to Reduce Setup Times and Machine Stoppages on the Molding Line of an SME in the Food Industry (2023)Quelle öffnenMittlere Ereignisdauer: 254 min · laut Bericht: “internal activities”
Wörtliches Zitat anzeigen
the times of internal activities, 254 min, and external activities, 26 min
- Application of Lean-Total Productive Maintenance Tools to Reduce Setup Times and Machine Stoppages on the Molding Line of an SME in the Food Industry (2023)Quelle öffnenMittlere Ereignisdauer: 26,0 min · laut Bericht: “external activities”
Wörtliches Zitat anzeigen
the times of internal activities, 254 min, and external activities, 26 min
- Analisis Pengukuran Nilai Overall Equipment Effectiveness (OEE) Pada Mesin Rice Milling Unit (RMU) di PT. FSTJ (2023)Quelle öffnenAnteil an der geplanten Zeit: 2,87 % · laut Bericht: “Setup”
Wörtliches Zitat anzeigen
Jika kita lihat total waktu Preventive Maintenance (PM) selama 1.905 menit terhadap waktu operasional yang 65.880 menit atau 2,89% dari waktu operasional dan waktu setup 1,890 menit atau 2,87% dari waktu operasional
- Analisis Pengukuran Nilai Overall Equipment Effectiveness (OEE) Pada Mesin Rice Milling Unit (RMU) di PT. FSTJ (2023)Quelle öffnenVerlustzeit: 1.890 min · laut Bericht: “Setup”
Wörtliches Zitat anzeigen
Selama rentang waktu tersebut waktu operasional adalah 65.880 menit, preventive maintenance 1.905 menit, setup 1.890 menit dan breakdown 960 menit , maka persen availabilitynya adalah
- Enhancing sustainability in manufacturing: A case study on reducing changeover time through single minute exchange of dies and risk analysis (2024)Quelle öffnenAnteil an der Verlustzeit: 35,5 % · laut Bericht: “changeover”
Wörtliches Zitat anzeigen
At stations A and B, the results of a post-SMED time analysis showed a reduction in changeover time of 35.54% and 49.94%, respectively.
- Enhancing sustainability in manufacturing: A case study on reducing changeover time through single minute exchange of dies and risk analysis (2024)Quelle öffnenAnteil an der Verlustzeit: 49,9 % · laut Bericht: “changeover”
Wörtliches Zitat anzeigen
At stations A and B, the results of a post-SMED time analysis showed a reduction in changeover time of 35.54% and 49.94%, respectively.
- Anteil an der geplanten Zeit: 0 % · laut Bericht: “Setup and adjustment losses”
Wörtliches Zitat anzeigen
𝑆𝑒𝑡𝑢𝑝 𝑎𝑛𝑑 𝑎𝑑𝑗𝑢𝑠𝑚𝑒𝑛𝑡 𝑙𝑜𝑠𝑠𝑒𝑠= 0 %
- Mejora de la Eficiencia General de los Equipos (EGE) en la etapa de prensado: Un estudio de caso en la industria de harina de pescado (2024)Quelle öffnenVerlustzeit: 112 min · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
La duración promedio de un cambio es de 111,9 minutos, lo que representa aproximadamente el 7.79% del tiempo total de producción disponible en un día y puede ocurrir diariamente.
- Mejora de la Eficiencia General de los Equipos (EGE) en la etapa de prensado: Un estudio de caso en la industria de harina de pescado (2024)Quelle öffnenAnteil an der geplanten Zeit: 7,79 % · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
La duración promedio de un cambio es de 111,9 minutos, lo que representa aproximadamente el 7.79% del tiempo total de producción disponible en un día y puede ocurrir diariamente.
- Optimizing Productivity in the Animal Feed Industry: A Lean Approach for Enhanced Efficiency and Quality Assurance (2024)Quelle öffnenVerlustzeit: 525 seconds · laut Bericht: “Line preparation time (changeover)”
Wörtliches Zitat anzeigen
Line preparation time (seconds) SMED 524.92 140 140.36 -73%
- Optimizing Productivity in the Animal Feed Industry: A Lean Approach for Enhanced Efficiency and Quality Assurance (2024)Quelle öffnenVerlustzeit: 140 seconds · laut Bericht: “Line preparation time (changeover)”
Wörtliches Zitat anzeigen
Line preparation time (seconds) SMED 524.92 140 140.36 -73%
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Quelle öffnenAnzahl der Ereignisse: 15,0 events · laut Bericht: “Internal activities”
Wörtliches Zitat anzeigen
147.54 15 23 63.22 84.32
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Quelle öffnenAnzahl der Ereignisse: 23,0 events · laut Bericht: “External activities”
Wörtliches Zitat anzeigen
147.54 15 23 63.22 84.32
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Quelle öffnenVerlustzeit: 63,2 min · laut Bericht: “Internal activities”
Wörtliches Zitat anzeigen
147.54 15 23 63.22 84.32
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Quelle öffnenVerlustzeit: 84,3 min · laut Bericht: “External activities”
Wörtliches Zitat anzeigen
147.54 15 23 63.22 84.32
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Quelle öffnenAnzahl der Ereignisse: 9,00 events · laut Bericht: “Internal activities”
Wörtliches Zitat anzeigen
138.14 9 29 40.72 97.42
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Quelle öffnenAnzahl der Ereignisse: 29,0 events · laut Bericht: “External activities”
Wörtliches Zitat anzeigen
138.14 9 29 40.72 97.42
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Quelle öffnenVerlustzeit: 40,7 min · laut Bericht: “Internal activities”
Wörtliches Zitat anzeigen
138.14 9 29 40.72 97.42
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Quelle öffnenVerlustzeit: 97,4 min · laut Bericht: “External activities”
Wörtliches Zitat anzeigen
138.14 9 29 40.72 97.42
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Quelle öffnenAnzahl der Ereignisse: 25,0 events · laut Bericht: “External activities”
Wörtliches Zitat anzeigen
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Quelle öffnenVerlustzeit: 25,6 min · laut Bericht: “Internal activities”
Wörtliches Zitat anzeigen
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
- Increase of the Availability of Machinery in a Food Company Applying the TPM, SMED and RCM Methodologies (2024)Quelle öffnenVerlustzeit: 80,1 min · laut Bericht: “External activities”
Wörtliches Zitat anzeigen
At the end of the activities, a final process time of 105.69 minutes was obtained, with eight internal and 25 external activities, each with a time of 25.62 and 80.07 minutes, respectively.
- Enhancing Operational Efficiency in Craft Beer Production: Implementation of Lean Manufacturing and TPM Methodologies in SMEs (2024)Quelle öffnenMittlere Ereignisdauer: 41,0 min · laut Bericht: “setup time”
Wörtliches Zitat anzeigen
Setup time was reduced from 41 to 29 minutes, representing a 29% decrease.
- Enhancing Operational Efficiency in Craft Beer Production: Implementation of Lean Manufacturing and TPM Methodologies in SMEs (2024)Quelle öffnenMittlere Ereignisdauer: 29,0 min · laut Bericht: “setup time”
Wörtliches Zitat anzeigen
Setup time was reduced from 41 to 29 minutes, representing a 29% decrease.
- The implementation of an integrated Lean Management-HACCP model: application in the food industry in Casablanca,Morocco (2025)Quelle öffnenMittlere Ereignisdauer: 20,0 min · laut Bericht: “series changeover”
Wörtliches Zitat anzeigen
The series changeover time is 20 min .
- The implementation of an integrated Lean Management-HACCP model: application in the food industry in Casablanca,Morocco (2025)Quelle öffnenMittlere Ereignisdauer: 10,0 min · laut Bericht: “series changeover”
Wörtliches Zitat anzeigen
Series changeover time reduced from 20 min to 10 min
- The implementation of an integrated Lean Management-HACCP model: application in the food industry in Casablanca,Morocco (2025)Quelle öffnenVerlustzeit: 20,0 min · laut Bericht: “series changeover”
Wörtliches Zitat anzeigen
The series changeover time is 20 min.
- A Lean Manufacturing Case Study: Enhancing Efficiency and Reducing Waste in Latin American Food Production (2024)Quelle öffnenAnteil an der Verlustzeit: 13,5 % · laut Bericht: “product fragility”
Wörtliches Zitat anzeigen
At the third level, the root causes were further detailed as clogging of cookies in conveyor belt chutes (55%), product fragility (13.5%), inadequate sealing of packaging (11.5%), and conveyor belt failures (20%).
- Anteil an der Verlustzeit: 8,90 % · laut Bericht: “size changeovers”
Wörtliches Zitat anzeigen
Specifically,label changeovers account for a 16% loss,followed closely by CIP processes at 15% and size changeovers at 8.9%.
- Anteil an der Verlustzeit: 40,0 % · laut Bericht: “changeovers”
Wörtliches Zitat anzeigen
A notable finding is that changeovers contribute to 40% of the total losses,emphasising the impact of equipment and process adjustments on operational performance.
- Anteil an der Verlustzeit: 16,0 % · laut Bericht: “label changeovers”
Wörtliches Zitat anzeigen
Specifically,label changeovers account for a 16% loss,followed closely by CIP processes at 15% and size changeovers at 8.9%.
- Anzahl der Ereignisse: 7.121 events · laut Bericht: “changeovers during liquid filling operations (2017)”
Wörtliches Zitat anzeigen
Starting from 7121 changeovers in 2017,there was a steady annual increase,culminating in 15 388 changeovers projected for 2023.
- Anzahl der Ereignisse: 15.388 events · laut Bericht: “changeovers during liquid filling operations (2023, projected)”
Wörtliches Zitat anzeigen
Starting from 7121 changeovers in 2017,there was a steady annual increase,culminating in 15 388 changeovers projected for 2023.
- Lean-TPM Production Model for Efficiency and Quality Enhancement in the Brewing Industry: Insights from a Peruvian Case Study (2025)Quelle öffnenMittlere Ereignisdauer: 41,0 min · laut Bericht: “setup time”
Wörtliches Zitat anzeigen
Setup time experienced a notable improvement, decreasing by 29%, from 41 to 29 minutes, reflecting substantial optimization in process efficiency.
- Lean-TPM Production Model for Efficiency and Quality Enhancement in the Brewing Industry: Insights from a Peruvian Case Study (2025)Quelle öffnenAnteil an der Verlustzeit: 19,8 % · laut Bericht: “extended equipment setup times”
Wörtliches Zitat anzeigen
Lastly, process stoppages due to machinery were the most significant factor, with an impact of 46.85%, stemming from extended equipment setup times, which represented 19.84%, suggesting the implementation of the SMED methodology to reduce these delays.
- Lean-TPM Production Model for Efficiency and Quality Enhancement in the Brewing Industry: Insights from a Peruvian Case Study (2025)Quelle öffnenMittlere Ereignisdauer: 29,0 min · laut Bericht: “setup time”
Wörtliches Zitat anzeigen
Setup time experienced a notable improvement, decreasing by 29%, from 41 to 29 minutes, reflecting substantial optimization in process efficiency.
- Performance Improvement Model Integrating Lean and Internet of things: AFoodProductionCase (2024)Quelle öffnenVerlustzeit: 35,0 % · laut Bericht: “setup time”
Wörtliches Zitat anzeigen
a 35% decrease in setup time
- Lean Manufacturing: effective tools to optimize dairy beverage production. Evidence based on a statistical analysis. (2025)Quelle öffnenMittlere Ereignisdauer: 42,6 min · laut Bericht: “Shift changeover time without Kanban”
Wörtliches Zitat anzeigen
Tiempo de cambio sin KANBAN (min) 42,62 8,15 19 %
- Lean Manufacturing: effective tools to optimize dairy beverage production. Evidence based on a statistical analysis. (2025)Quelle öffnenMittlere Ereignisdauer: 12,4 min · laut Bericht: “Shift changeover time with Kanban”
Wörtliches Zitat anzeigen
Tiempo de cambio con KANBAN (min) 12,43 1,36 11 %
- Aggregate Analysis of Packaging Machine Effectiveness Using the OEE Method at PT. XYZ (2025)Quelle öffnenAnteil an der Verlustzeit: 6,00 % · laut Bericht: “Setup and Adjusments Losses”
Wörtliches Zitat anzeigen
Setup and Adjusments Losses 2.425 40.410 6% 100%
- Aggregate Analysis of Packaging Machine Effectiveness Using the OEE Method at PT. XYZ (2025)Quelle öffnenVerlustzeit: 2.425 Minutes · laut Bericht: “Setup and Adjusments Losses”
Wörtliches Zitat anzeigen
Setup and Adjusments Losses 2.425 40.410 6% 100%
- Verlustzeit: 140 min · laut Bericht: “breaks, reference change”
Wörtliches Zitat anzeigen
-Planned downtimes: 140 minutes, breaks, reference change, …
- Propuesta para incrementar la disponibilidad de equipos a través de la implementación de Lean Manufacturing e IoT en una industria de galletas (2025)Quelle öffnenAnzahl der Ereignisse: 731 events · laut Bericht: “Elevados tiempos de setup”
Wörtliches Zitat anzeigen
AS IS 731 52,802 72.24 23.3% TO BE 408 22,606 55.41
- Propuesta para incrementar la disponibilidad de equipos a través de la implementación de Lean Manufacturing e IoT en una industria de galletas (2025)Quelle öffnenVerlustzeit: 22.606 min · laut Bericht: “Elevados tiempos de setup”
Wörtliches Zitat anzeigen
AS IS 731 52,802 72.24 23.3% TO BE 408 22,606 55.41
- Propuesta para incrementar la disponibilidad de equipos a través de la implementación de Lean Manufacturing e IoT en una industria de galletas (2025)Quelle öffnenAnzahl der Ereignisse: 408 events · laut Bericht: “Elevados tiempos de setup”
Wörtliches Zitat anzeigen
AS IS 731 52,802 72.24 23.3% TO BE 408 22,606 55.41
- Propuesta para incrementar la disponibilidad de equipos a través de la implementación de Lean Manufacturing e IoT en una industria de galletas (2025)Quelle öffnenMittlere Ereignisdauer: 55,4 min · laut Bericht: “Elevados tiempos de setup”
Wörtliches Zitat anzeigen
AS IS 731 52,802 72.24 23.3% TO BE 408 22,606 55.41
- Propuesta para incrementar la disponibilidad de equipos a través de la implementación de Lean Manufacturing e IoT en una industria de galletas (2025)Quelle öffnenVerlustzeit: 52.802 min · laut Bericht: “Elevados tiempos de setup”
Wörtliches Zitat anzeigen
AS IS 731 52,802 72.24 23.3% TO BE 408 22,606 55.41
- Propuesta para incrementar la disponibilidad de equipos a través de la implementación de Lean Manufacturing e IoT en una industria de galletas (2025)Quelle öffnenMittlere Ereignisdauer: 72,2 min · laut Bericht: “Elevados tiempos de setup”
Wörtliches Zitat anzeigen
AS IS 731 52,802 72.24 23.3% TO BE 408 22,606 55.41
- Propuesta para incrementar la disponibilidad de equipos a través de la implementación de Lean Manufacturing e IoT en una industria de galletas (2025)Quelle öffnenVerlustzeit: 0 min · laut Bericht: “Cambio de Programación”
Wörtliches Zitat anzeigen
Cambio de Programación 0 0.00% S/ -
- Propuesta para incrementar la disponibilidad de equipos a través de la implementación de Lean Manufacturing e IoT en una industria de galletas (2025)Quelle öffnenAnteil an der Verlustzeit: 185 % · laut Bericht: “Elevados tiempos de setup”
Wörtliches Zitat anzeigen
Elevados tiempos de setup 52,802 184.900% S/2,375,887.99
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Quelle öffnenAnteil an der Verlustzeit: 23,3 % · laut Bericht: “cambios de formato”
Wörtliches Zitat anzeigen
los motivos son las averías / reparaciones, reprocesos, cambios de formato y otros donde estas representan el 41.1%, 35.7% y 23.3% respectivamente
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Quelle öffnenMittlere Ereignisdauer: 26,0 min · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
La variación del tiempo del Set – up a lo largo del año es en promedio de 26 minutos siendo el objetivo de 19 minutos
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Quelle öffnenAnzahl der Ereignisse: 278 events · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
con respecto a las 278 paradas de cambio de formato hace una demora anual de 1946 minutos
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Quelle öffnenAnteil an der geplanten Zeit: 4,24 % · laut Bericht: “Cambios de formato”
Wörtliches Zitat anzeigen
Cambios de formato 4,24%
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Quelle öffnenMittlere Ereignisdauer: 19,5 min · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
Tiempo de Set Up 26 min 19,5 min 19,00 min
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Quelle öffnenAnteil an der geplanten Zeit: 1,50 % · laut Bericht: “Cambios de formato”
Wörtliches Zitat anzeigen
Cambios de formato 1,50% REDUCIDO
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Quelle öffnenMittlere Ereignisdauer: 19,5 min · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
donde el promedio del cambio de formato es de 19.53 minutos
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Quelle öffnenVerlustzeit: 26,0 min · laut Bericht: “Cambio de formato”
Wörtliches Zitat anzeigen
La variación del tiempo del Set – up a lo largo del año es en promedio de 26 minutos
- Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED (2025)Quelle öffnenVerlustzeit: 19,5 min · laut Bericht: “Cambio de formato”
Wörtliches Zitat anzeigen
Tiempo de Set Up 26 min → 19,5 min
- Anteil an der Verlustzeit: 42,0 % · laut Bericht: “setup and adjustment loss”
Wörtliches Zitat anzeigen
The Six Big Losses analysis showed that the largest losses came from setup and adjustment losses, accounting for 42%.
- Anteil an der Verlustzeit: 42,0 % · laut Bericht: “setup and adjustment loss”
Wörtliches Zitat anzeigen
The Six Big Losses analysis showed that the largest losses came from setup and adjustment losses, accounting for 42%
- Propuesta de mejora para incrementar el rendimiento de la línea de salsas usando SMED, Kanban, Industria 4.0 y 5S en una empresa del sector alimenticio (2026)Quelle öffnenAnteil an der Verlustzeit: 39,9 % · laut Bericht: “Demoras por cambios de Formato”
Wörtliches Zitat anzeigen
Demoras por cambios de Formato 9262.27 39.85% 39.85%
- Propuesta de mejora para incrementar el rendimiento de la línea de salsas usando SMED, Kanban, Industria 4.0 y 5S en una empresa del sector alimenticio (2026)Quelle öffnenVerlustzeit: 9.262 min · laut Bericht: “Demoras por cambios de Formato”
Wörtliches Zitat anzeigen
Demoras por cambios de Formato 9262.27 39.85% 39.85%
- Propuesta de mejora para incrementar el rendimiento de la línea de salsas usando SMED, Kanban, Industria 4.0 y 5S en una empresa del sector alimenticio (2026)Quelle öffnenMittlere Ereignisdauer: 3,20 h · laut Bericht: “cambio de producto”
Wörtliches Zitat anzeigen
Setup inicial (horas) 3.20 3.20 3.20 3.20 3.20 3.20
- Propuesta de mejora para incrementar el rendimiento de la línea de salsas usando SMED, Kanban, Industria 4.0 y 5S en una empresa del sector alimenticio (2026)Quelle öffnenMittlere Ereignisdauer: 0,630 h · laut Bericht: “cambio de presentación”
Wörtliches Zitat anzeigen
Setup inicial (horas) 0.63 0.63 0.63 0.63 0.63 0.63
- Propuesta de mejora para incrementar el rendimiento de la línea de salsas usando SMED, Kanban, Industria 4.0 y 5S en una empresa del sector alimenticio (2026)Quelle öffnenAnzahl der Ereignisse: 52,0 events/year · laut Bericht: “cambio de producto”
Wörtliches Zitat anzeigen
Cambio de producto / año 52 55 57 60 63 66
- Propuesta de mejora para incrementar el rendimiento de la línea de salsas usando SMED, Kanban, Industria 4.0 y 5S en una empresa del sector alimenticio (2026)Quelle öffnenAnzahl der Ereignisse: 208 events/year · laut Bericht: “cambio de presentación”
Wörtliches Zitat anzeigen
Cambio de presentación / año 208 218 229 241 253 265
- Propuesta de mejora para incrementar el rendimiento de la línea de salsas usando SMED, Kanban, Industria 4.0 y 5S en una empresa del sector alimenticio (2026)Quelle öffnenMittlere Ereignisdauer: 1,99 h · laut Bericht: “cambio de producto”
Wörtliches Zitat anzeigen
Tiempo setup logrado (horas) 1.99 1.99 1.92 1.92 1.92 1.92
- Propuesta de mejora para incrementar el rendimiento de la línea de salsas usando SMED, Kanban, Industria 4.0 y 5S en una empresa del sector alimenticio (2026)Quelle öffnenMittlere Ereignisdauer: 0,440 h · laut Bericht: “cambio de presentación”
Wörtliches Zitat anzeigen
Tiempo setup logrado (horas) 0.44 0.44 0.38 0.38 0.38 0.38
- Productivity Improvement Through the Application of Lean Six Sigma Tools in a Non-Alcoholic Beverage Company (2025)Quelle öffnenVerlustzeit: 16.800 min/year · laut Bericht: “format changeover (Set Up)”
Wörtliches Zitat anzeigen
A total of 16,800 minutes per year associated with format changeover (Set Up) were identified, equivalent to 10.45% of productive time.
- Productivity Improvement Through the Application of Lean Six Sigma Tools in a Non-Alcoholic Beverage Company (2025)Quelle öffnenAnteil an der geplanten Zeit: 10,5 % · laut Bericht: “format changeover (Set Up)”
Wörtliches Zitat anzeigen
A total of 16,800 minutes per year associated with format changeover (Set Up) were identified, equivalent to 10.45% of productive time.
- Reducing Changeover Time Through SMED Methodology: A Review and Case Application in Beverage Bottling (2026)Quelle öffnenVerlustzeit: 28,0 min · laut Bericht: “product changeover”
Wörtliches Zitat anzeigen
The intervention reduced average changeover time from 40 minutes to approximately 28 minutes - a 30% reduction
- Reducing Changeover Time Through SMED Methodology: A Review and Case Application in Beverage Bottling (2026)Quelle öffnenVerlustzeit: 40,0 min · laut Bericht: “product changeover”
Wörtliches Zitat anzeigen
The intervention reduced average changeover time from 40 minutes to approximately 28 minutes - a 30% reduction
- Impact evaluation of operator training on the understanding of performance indicators (2025)Quelle öffnenMittlere Ereignisdauer: 9,00 min · laut Bericht: “setup time”
Wörtliches Zitat anzeigen
a 16.7% reduction in average setup time was observed (from 10.8 to 9.0 minutes)
- Impact evaluation of operator training on the understanding of performance indicators (2025)Quelle öffnenMittlere Ereignisdauer: 10,8 min · laut Bericht: “setup time”
Wörtliches Zitat anzeigen
a 16.7% reduction in average setup time was observed (from 10.8 to 9.0 minutes)
- Verlustzeit: 360 min · laut Bericht: “setup time”
Wörtliches Zitat anzeigen
The objective is to achieve a significant reduction in setup time, from 360 to 240 minutes, representing a decrease of approximately 33.33%.
- Anteil an der Verlustzeit: 4,10 % · laut Bericht: “setup time”
Wörtliches Zitat anzeigen
reducing the impact on production stoppages from 4.1% to 3%, as well as practical and applicable recommendations for managers and professionals in the chocolate industry.
- Verlustzeit: 240 min · laut Bericht: “setup time”
Wörtliches Zitat anzeigen
The objective is to achieve a significant reduction in setup time, from 360 to 240 minutes, representing a decrease of approximately 33.33%.
- Anteil an der Verlustzeit: 3,00 % · laut Bericht: “setup time”
Wörtliches Zitat anzeigen
reducing the impact on production stoppages from 4.1% to 3%, as well as practical and applicable recommendations for managers and professionals in the chocolate industry.
- Productivity Improvement in a Bakery and Pastry Premix Company by Applying Preventive Maintenance, SMED and 5´S (2026)Quelle öffnenMittlere Ereignisdauer: 24,9 min · laut Bericht: “Changeover (SKU average)”
Wörtliches Zitat anzeigen
1 - 5 24.91 16.66 33.1%
- Productivity Improvement in a Bakery and Pastry Premix Company by Applying Preventive Maintenance, SMED and 5´S (2026)Quelle öffnenMittlere Ereignisdauer: 16,7 min · laut Bericht: “Changeover (SKU average)”
Wörtliches Zitat anzeigen
1 - 5 24.91 16.66 33.1%
- Waste Management and Operational Efficiency Improvement in Cake and Pastry Factory Through Adapting DMAIC Methodology (2026)Quelle öffnenAnteil an der geplanten Zeit: 9,77 % · laut Bericht: “changeover time”
Wörtliches Zitat anzeigen
Changeover activities during January 2025 consumed 66.63 hours, which accounted for 9.77% of total production time, a relatively high percentage attributed to the product variety.
- Waste Management and Operational Efficiency Improvement in Cake and Pastry Factory Through Adapting DMAIC Methodology (2026)Quelle öffnenVerlustzeit: 66,6 h · laut Bericht: “changeover time”
Wörtliches Zitat anzeigen
Changeover activities during January 2025 consumed 66.63 hours, which accounted for 9.77% of total production time, a relatively high percentage attributed to the product variety.
- Analisis Overall Equipment Effectiveness dan Six Big Losses pada Mesin Packaging Makanan di PT XYZ (2026)Quelle öffnenAnteil an der Verlustzeit: 11,8 % · laut Bericht: “Setup and Adjustment Losses”
Wörtliches Zitat anzeigen
Kegagalan karena Setup and Adjustment Losses 31,20 11,82 Sedang
- Analisis Overall Equipment Effectiveness dan Six Big Losses pada Mesin Packaging Makanan di PT XYZ (2026)Quelle öffnenVerlustzeit: 31,2 Jam · laut Bericht: “Setup and Adjustment Losses”
Wörtliches Zitat anzeigen
Kegagalan karena Setup and Adjustment Losses 31,20 11,82 Sedang
- Improvement proposal to increase machine availability in yogurt packaging by applying TPM tools autonomous, planned and SMED maintenance in a food industry company (2026)Quelle öffnenVerlustzeit: 90,0 min · laut Bericht: “tiempo de cambio de formato”
Wörtliches Zitat anzeigen
el tiempo de cambio de formato disminuyó de 90 a 55 minutos (-38.89%) mediante la aplicación de SMED
- Improvement proposal to increase machine availability in yogurt packaging by applying TPM tools autonomous, planned and SMED maintenance in a food industry company (2026)Quelle öffnenMittlere Ereignisdauer: 90,0 min · laut Bericht: “format change”
Wörtliches Zitat anzeigen
el tiempo de cambio de formato disminuyó de 90 a 55 minutos
- Proposal for improving production efficiency in a food sector company, using SMED, Planned Maintenance and Poka-Yoke (2026)Quelle öffnenAnteil an der Verlustzeit: 17,4 % · laut Bericht: “high setup times”
Wörtliches Zitat anzeigen
Esta situación fue originada por cuatro causas raíz: averías en equipos (35.41%), elevados tiempos de setup (17.38%), producto final golpeado (32.69%) y etiquetado incorrecto (14.52%)
- Proposal for improving production efficiency in a food sector company, using SMED, Planned Maintenance and Poka-Yoke (2026)Quelle öffnenAnteil an der Verlustzeit: 32,7 % · laut Bericht: “damaged final product”
Wörtliches Zitat anzeigen
Esta situación fue originada por cuatro causas raíz: averías en equipos (35.41%), elevados tiempos de setup (17.38%), producto final golpeado (32.69%) y etiquetado incorrecto (14.52%)
- Integrating SMED and Mechanical Design for Changeover Reduction in Beverage Packaging Lines (2026)Quelle öffnenAnteil an der geplanten Zeit: 7,20 % · laut Bericht: “Changeover Time (COT) and Ramp-Up Time (RUT)”
Wörtliches Zitat anzeigen
Although breakdown and malfunction losses (18.04%) are greater in aggregate than changeover and ramp-up losses (≈7.2%), they are not the focus of this study.
- Mittlere Ereignisdauer: 136 min · laut Bericht: “cambio de formato (tiempo por ciclo)”
Wörtliches Zitat anzeigen
reduciendo, en promedio, los tiempos de parada rutinarias de 136 min por ciclo del proceso de llenado en el pretest a 21 min después de la implementación
- Mittlere Ereignisdauer: 22,0 min · laut Bericht: “tiempo de cambio de setup (gráfica de control)”
Wörtliches Zitat anzeigen
El tiempo promedio de cambio de setup se estabilizó en un valor central de 21.988, manteniéndose alejado de los límites de control superior (36.056) e inferior (7.921).
- Verlustzeit: 3.341 min · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
La mejora buscó reducir las paradas asociados con los 59 cambios de formato en la presentación de 3,030 ml que totalizó 3,341 minutos el año 2023 equivalentes al 46.91% del porcentaje total de paradas
- Anteil an der Verlustzeit: 46,9 % · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
La mejora buscó reducir las paradas asociados con los 59 cambios de formato en la presentación de 3,030 ml que totalizó 3,341 minutos el año 2023 equivalentes al 46.91% del porcentaje total de paradas
- Anzahl der Ereignisse: 59,0 events · laut Bericht: “cambio de formato”
Wörtliches Zitat anzeigen
La mejora buscó reducir las paradas asociados con los 59 cambios de formato en la presentación de 3,030 ml que totalizó 3,341 minutos el año 2023
- Mittlere Ereignisdauer: 64,0 min · laut Bericht: “cambio de formato (llenadora)”
Wörtliches Zitat anzeigen
La toma de tiempos identificó a la llenadora como el equipo cuyo cambio de formato tomaba en promedio 64 minutos siendo el equipo crítico en la línea de producción
- Mittlere Ereignisdauer: 21,0 min · laut Bericht: “cambio de formato (tiempo por ciclo)”
Wörtliches Zitat anzeigen
reduciendo, en promedio, los tiempos de parada rutinarias de 136 min por ciclo del proceso de llenado en el pretest a 21 min después de la implementación
- Anteil an der geplanten Zeit: 9,06 % · laut Bericht: “cambios de formato”
Wörtliches Zitat anzeigen
los estimados porcentuales de tiempos estándar respecto al tiempo total del proceso fue de 9.06% para las paradas rutinarias y 90.94% para el proceso de embotellado
- Anteil an der geplanten Zeit: 6,90 % · laut Bericht: “cambios de formato”
Wörtliches Zitat anzeigen
La reducción del tiempo estándar por la reducción en los tiempos de cambios de formato pasó a representar el 6.9%, del tiempo total
- Melhoria do Indicador OEE em Linhas de Enchimento e Embalamento de Óleos e Azeites (2025)Quelle öffnenVerlustzeit: 10,0 horas · laut Bericht: “tempo de setup”
Wörtliches Zitat anzeigen
Numa linha automática aplica-se a metodologia SMED, que permitiu reduzir o tempo de setup em 50 por cento, correspondendo a cerca de 10 horas de capacidade libertada num único mês.
- Розроблення заходів операційного вдосконалення виробничих процесів виготовлення вермішелі швидкого приготування “Reeva зі смаком гострої курки” для оператора ринку ТОВ «Евро Фуд Сервіс» (2025)Quelle öffnenMittlere Ereignisdauer: 2.100 с · laut Bericht: “розгінна фаза (Setup Time) виробництва після зупинки та запуску із холодного старту”
Wörtliches Zitat anzeigen
Особливе значення має розгінна фаза (Setup Time) виробництва після зупинки та запуску із холодного старту, вона триває в середньому 2 100 секунд (35 хвилин) (Табл 3.3).
- Enterprise Resource Planning System Integrated with Overall Equipment Effectiveness for Enhanced Performance Tracking Metrics: Mixed-Methods Case Study of a Nigerian Feed Mill (2026)Quelle öffnenAnteil an der Verlustzeit: 2,59 % · laut Bericht: “Production change”
Wörtliches Zitat anzeigen
5 Production change 34.76 2.59 100.00 Trivial many
- Enterprise Resource Planning System Integrated with Overall Equipment Effectiveness for Enhanced Performance Tracking Metrics: Mixed-Methods Case Study of a Nigerian Feed Mill (2026)Quelle öffnenVerlustzeit: 34,8 hrs · laut Bericht: “Production change”
Wörtliches Zitat anzeigen
5 Production change 34.76 2.59 100.00 Trivial many
- Verlustzeit: 2,43 hrs per production cycle · laut Bericht: “set up time”
Wörtliches Zitat anzeigen
the improved processes can reduce set up time from 6.90 hrs per production cycle to 2.43 hrs per production cycle or about 64.78%
- Verlustzeit: 6,90 hrs per production cycle · laut Bericht: “set up time”
Wörtliches Zitat anzeigen
the improved processes can reduce set up time from 6.90 hrs per production cycle to 2.43 hrs per production cycle or about 64.78%
- Integrasi OEE–Pareto–FMEA–Ishikawa untuk Peningkatan Efektivitas Mesin dan Mutu Kemasan Kecap Pouch 550 mL: Integrated OEE–Pareto–FMEA–Ishikawa Approach for Improving Machine Effectiveness and Packaging Quality of 550 mL Soy Sauce Pouch (2026)Quelle öffnenAnteil an der Verlustzeit: 19,0 % · laut Bericht: “Setup and adjustment loss”
Wörtliches Zitat anzeigen
Setup and adjustment loss 19

