Eingeschlossene Studie
Integrating Lean Manufacturing and TPM for Process Optimization in Bakery SMEs: A Case Study from Peru
1Bibliografische Angaben
- Autoren
- Roger Alberto Vásquez-García, Rubén Francisco Samanez-Coronel
- Jahr
- 2024
- Publikationsorgan
- International Conference on Industrial Engineering and Operations Management (IEOM)
- Land
- Peru
- Segment
- Backwaren und Teigwaren
- Prozessfamilie
- Formen, Backen und Garen
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · — Linien · — Maschinen
- Beobachtungszeitraum
- 120 Tage
- Datenerhebung
- maintenance_records
- Intervention
Umfeld laut Studie anzeigen
The validation scenario took place in a case study involving a bakery SME located in Peru, which specialized in producing various pastries and desserts, including cakes and soufflés.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 7Hohes Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—ovens and mixing machinesWörtliches Zitat anzeigen (Section 4.4)The MTBF (mean time between failures) increased from 24.33 hours to 61.33 hours, representing a 150% improvement in equipment reliability. | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 61,3 hours | Beide Extraktionen übereinstimmend |
—ovens and mixing machinesWörtliches Zitat anzeigen (Section 4.4)The MTTR (mean time to repair) improved from 5.10 hours in September to 3.33 hours by December, a 35% reduction. | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 3,33 hours | Beide Extraktionen übereinstimmend |
cakes that were overbaked or underbaked due to oven temperature fluctuationsovensWörtliches Zitat anzeigen (Section 4.4)Before maintenance training, the number of defective products, particularly cakes that were overbaked or underbaked due to oven temperature fluctuations, averaged 30 units per month. | Prozessfehler (Ausschuss und Nacharbeit) | Anzahl der Ereignisse | 30,0 units/month | Beide Extraktionen übereinstimmend |
defective cakes due to improper proceduresWörtliches Zitat anzeigen (Section 4.5)The percentage of defective cakes due to improper procedures dropped from 9.52% to 3.85%, a reduction of over 60%. | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 3,85 % | Beide Extraktionen übereinstimmend |
defective cakes due to improper proceduresWörtliches Zitat anzeigen (Section 4.5)The percentage of defective cakes due to improper procedures dropped from 9.52% to 3.85%, a reduction of over 60%. | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 9,52 % | Beide Extraktionen übereinstimmend |
cakes that were overbaked or underbaked due to oven temperature fluctuationsovensWörtliches Zitat anzeigen (Section 4.4)This number dropped to 12 units per month after the operators were trained to monitor and maintain the ovens more effectively. | Prozessfehler (Ausschuss und Nacharbeit) | Anzahl der Ereignisse | 12,0 units/month | Beide Extraktionen übereinstimmend |
—ovens and mixing machinesWörtliches Zitat anzeigen (Section 4.4)Prior to implementation, the bakery experienced an average of 101.15 minutes of machine downtime per week, resulting in the loss of 17 products per month. | Anlagenausfall (Störungen) | Verlustzeit | 101 min/week | Beide Extraktionen übereinstimmend |
—ovens and mixing machinesWörtliches Zitat anzeigen (Section 4.4)The MTTR (mean time to repair) improved from 5.10 hours in September to 3.33 hours by December, a 35% reduction. | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 5,10 hours | Einfache Extraktion |
—ovens and mixing machinesWörtliches Zitat anzeigen (Table 1)MTTR hours 4.27 3.5 3.33 -22.01% | Anlagenausfall (Störungen) | Mittlere Ereignisdauer | 4,27 hours | Einfache Extraktion |
—ovens and mixing machinesWörtliches Zitat anzeigen (Section 4.4)The MTBF (mean time between failures) increased from 24.33 hours to 61.33 hours, representing a 150% improvement in equipment reliability. | Anlagenausfall (Störungen) | Zeit zwischen Ereignissen | 24,3 hours | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 1)Rate of reprocessed products % 23% 10% 13% -43.48% | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 23,0 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 1)Rate of reprocessed products % 23% 10% 13% -43.48% | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 13,0 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 1, Results section, page 10-11)the rate of order fulfillment improved significantly, rising from 77.81% to 91.23% | none | Anteil an der geplanten Zeit | 77,8 % | Einfache Extraktion |
searching for production tools and materialsWörtliches Zitat anzeigen (Section 4.3, page 11)the time spent searching for tools decreased from an average of 77 minutes per shift to 29 minutes, a 62% reduction | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Verlustzeit | 77,0 minutes | Einfache Extraktion |
oven overheating/shutdown, mixing machine blockagesovens, mixing machinesWörtliches Zitat anzeigen (Section 4.4, page 9)an average of 101.15 minutes of machine downtime per week, resulting in the loss of 17 products per month | Anlagenausfall (Störungen) | Anzahl der Ereignisse | 17,0 units | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 1, Results section, page 10-11)the rate of order fulfillment improved significantly, rising from 77.81% to 91.23% | none | Anteil an der geplanten Zeit | 91,2 % | Einfache Extraktion |
searching for production tools and materials - after 5S implementationWörtliches Zitat anzeigen (Section 4.3, page 11)the time spent searching for tools decreased from an average of 77 minutes per shift to 29 minutes, a 62% reduction | Organisatorische oder externe Stillstände (Material- oder Personalmangel, Ausfall der Versorgung) | Verlustzeit | 29,0 minutes | Einfache Extraktion |
oven overheating/shutdown, mixing machine blockages - after autonomous maintenance trainingovens, mixing machinesWörtliches Zitat anzeigen (Section 4.4, page 9)reducing monthly product losses from 17 to 5 | Anlagenausfall (Störungen) | Anzahl der Ereignisse | 5,00 units | Einfache Extraktion |
Beobachtungseinheiten
- Bakery SME - whole plant · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
- Bakery SME - whole plant · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Bakery SME (Peru) · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Bakery SME (Peru) · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention

