Tool/material search time due to lack of visual workplace organization
Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.
Kurz gefasst
Sie tritt bei etwa 1 von 100 untersuchten Linien auf.
Wenn sie auftritt, entfällt auf sie im Mittel etwa 57 % der Verlustzeit der Linie. Berichtet von 1 der 127 Studien, die sie beobachten konnten (spärliche Evidenz).
Was passiert
Operators or technicians lose production time looking for tools, spare parts or changeover components because the workplace lacks visual management practices such as labeled storage locations, shadow boards or standardized kits. The absence of a clear place for each item forces ad hoc searching whenever a tool or part is needed, interrupting the work in progress.
Was man dagegen tut
Implement visual workplace organization practices such as dedicated shadow boards, labeled storage for tools and changeover parts, point-of-use kits and standardized carts placed near the equipment. Visual indicators and periodic audits help sustain the discipline and shorten retrieval time.
Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.
1Wahrscheinlichkeit und Evidenz
- Auftretenswahrscheinlichkeit
- 0,5 % [0,1–1,4 %]
- Erwarteter Anteil an der Verlustzeit
- 0,3 % [0,1–0,8 %]
- Anteil an der Verlustzeit bei Auftreten
- 57 % [46–67 %]
- Studien / Einheiten
- 127 / 161
- Evidenzgrad
- D
Grad D: 0 oder 1 Studie; die Schätzung beruht auf partiellem Pooling und Priori-Verteilungen, und das breite Intervall ist das Ergebnis.
2Wahrscheinlichkeit nach Segment
- Milchprodukte0,6 % [0,1–2,2 %]13 Studien
- Erfrischungsgetränke, abgefülltes Wasser und Säfte0,5 % [0,1–1,8 %]26 Studien
- Bier, Wein und Spirituosen0,6 % [0,1–2,3 %]11 Studien
- Backwaren und Teigwaren0,8 % [0,1–3,0 %]24 Studien
- Fleisch, Geflügel und Fisch0,6 % [0,1–2,3 %]9 Studien
- Obst- und Gemüseverarbeitung0,6 % [0,1–2,3 %]7 Studien
- Getreide- und Ölsaatenmüllerei0,6 % [0,1–2,3 %]6 Studien
- Zucker und Süßwaren0,6 % [0,1–2,1 %]9 Studien
- Snacks, Kaffee, Tee und sonstige Lebensmittel0,6 % [0,1–2,4 %]5 Studien
- Futtermittel und Heimtiernahrung0,6 % [0,1–2,4 %]7 Studien
- Lebensmittelherstellung (nicht spezifiziert oder gemischt)0,6 % [0,1–2,3 %]10 Studien
3Mechanismus, SCADA-Signatur und Gegenmaßnahme
Mechanismus
Ingenieurpraktische HinweiseOperators or technicians lose production time looking for tools, spare parts or changeover components because the workplace lacks visual management practices such as labeled storage locations, shadow boards or standardized kits. The absence of a clear place for each item forces ad hoc searching whenever a tool or part is needed, interrupting the work in progress.
So zeigt sie sich in SCADA-Daten
Ingenieurpraktische HinweiseThis cause rarely triggers machine alarms; it appears instead as operator-logged downtime with generic reasons like search or waiting, as idle or manual-mode states with no associated fault code, or as gaps between the end of one task and the recorded start of the next without any equipment state change. It is typically captured only through manual annotations or MES downtime reason codes rather than automatic sensor signals.
Gegenmaßnahme
Ingenieurpraktische HinweiseImplement visual workplace organization practices such as dedicated shadow boards, labeled storage for tools and changeover parts, point-of-use kits and standardized carts placed near the equipment. Visual indicators and periodic audits help sustain the discipline and shorten retrieval time.
4Quellen
- Integrating Lean Manufacturing and TPM for Process Optimization in Bakery SMEs: A Case Study from Peru (2024)Quelle öffnenVerlustzeit: 77,0 minutes · laut Bericht: “searching for production tools and materials”
Wörtliches Zitat anzeigen
the time spent searching for tools decreased from an average of 77 minutes per shift to 29 minutes, a 62% reduction
- Integrating Lean Manufacturing and TPM for Process Optimization in Bakery SMEs: A Case Study from Peru (2024)Quelle öffnenVerlustzeit: 29,0 minutes · laut Bericht: “searching for production tools and materials - after 5S implementation”
Wörtliches Zitat anzeigen
the time spent searching for tools decreased from an average of 77 minutes per shift to 29 minutes, a 62% reduction
- Productivity Improvement Through the Application of Lean Six Sigma Tools in a Non-Alcoholic Beverage Company (2025)Quelle öffnenVerlustzeit: 17.472 min/year · laut Bericht: “tool search”
Wörtliches Zitat anzeigen
During the diagnostic phase, 17,472 annual minutes were identified as being associated with tool search activities, equivalent to 10.87% of total working time.
- Productivity Improvement Through the Application of Lean Six Sigma Tools in a Non-Alcoholic Beverage Company (2025)Quelle öffnenAnteil an der Verlustzeit: 10,9 % · laut Bericht: “tool search”
Wörtliches Zitat anzeigen
During the diagnostic phase, 17,472 annual minutes were identified as being associated with tool search activities, equivalent to 10.87% of total working time.
- Production Management Model Based on Lean Manufacturing Tools and SLP to Increase Productivity in a Meatball (BARF) Plant (2026)Quelle öffnenVerlustzeit: 5,77 min · laut Bericht: “Search time due to lack of visual control”
Wörtliches Zitat anzeigen
Search time due to lack of visual control 5.77 min 2.77 min -3.00 min
- Production Management Model Based on Lean Manufacturing Tools and SLP to Increase Productivity in a Meatball (BARF) Plant (2026)Quelle öffnenVerlustzeit: 2,77 min · laut Bericht: “Search time due to lack of visual control”
Wörtliches Zitat anzeigen
Search time due to lack of visual control 5.77 min 2.77 min -3.00 min

