foratvise
Loslegen
Eingeschlossene Studie

Enhancing Operational Efficiency in an Animal Feed Pelleting Line Using Preventive Maintenance and Standard Work

Quelle öffnen

1Bibliografische Angaben

Autoren
Fabiana Alva-Gayoso, Piero Germana-Cavero, Carlos Urbina-Rivera, Manuel Fernando Montoya Ramírez
Jahr
2025
Publikationsorgan
International Conference on Industrial Engineering and Operations Management (IEOM)
Land
Peru
Segment
Futtermittel und Heimtiernahrung
Prozessfamilie
Formen, Backen und Garen
Studientyp
Einzelfallstudie
Extraktionsumfang
Volltext
Umfang
1 Werke · 1 Linien · 1 Maschinen
Beobachtungszeitraum
—
Datenerhebung
manual_logs
Intervention
Umfeld laut Studie anzeigen
In the company analyzed, the pelletizing machine operates with an Overall Equipment Effectiveness (OEE) of 80%, which is below the international benchmark of approximately 85%.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 9Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
dosing deviationspelletizing machine
Wörtliches Zitat anzeigen (Introduction, p.1)
mainly caused by mechanical failures due to the lack of preventive maintenance (48.4%), high levels of waste reprocessing (31.4%), and dosing deviations (3.4%)
Prozessfehler (Ausschuss und Nacharbeit)Anteil an der Verlustzeit3,40 %Durch Schiedsentscheid
high levels of waste reprocessingpelletizing machine
Wörtliches Zitat anzeigen (Introduction, p.1)
mainly caused by mechanical failures due to the lack of preventive maintenance (48.4%), high levels of waste reprocessing (31.4%), and dosing deviations (3.4%)
Prozessfehler (Ausschuss und Nacharbeit)Anteil an der Verlustzeit31,4 %Beide Extraktionen übereinstimmend
mechanical failures due to the lack of preventive maintenancepelletizing machine
Wörtliches Zitat anzeigen (Introduction, p.1)
mainly caused by mechanical failures due to the lack of preventive maintenance (48.4%), high levels of waste reprocessing (31.4%), and dosing deviations (3.4%)
Anlagenausfall (Störungen)Anteil an der Verlustzeit48,4 %Beide Extraktionen übereinstimmend
—pelletizing machine
Wörtliches Zitat anzeigen (Introduction, p.1)
the pelletizing machine operates with an Overall Equipment Effectiveness (OEE) of 80%, which is below the international benchmark of approximately 85%
noneOEE80,0 %Beide Extraktionen übereinstimmend
waste reprocessing eventspellet mill
Wörtliches Zitat anzeigen (Table 2)
Number of waste reprocessing events 11.5 11.4 0.88%
Prozessfehler (Ausschuss und Nacharbeit)Anzahl der Ereignisse11,5 events/roundBeide Extraktionen übereinstimmend
—pelletizing line
Wörtliches Zitat anzeigen (Table 2)
Total bags produced 360 368 2.17%
noneDurchsatz360 bags/roundBeide Extraktionen übereinstimmend
defective bagspellet mill
Wörtliches Zitat anzeigen (Table 2)
Defective bags 0.9 0.867 3.80%
Prozessfehler (Ausschuss und Nacharbeit)Anzahl der Ereignisse0,900 bags/roundBeide Extraktionen übereinstimmend
production stoppagespelletizing machine
Wörtliches Zitat anzeigen (Introduction, p.1)
A diagnostic analysis revealed that 83.2% of the lost productive time is associated with production stoppages, mainly caused by mechanical failures due to the lack of preventive maintenance (48.4%), high levels of waste reprocessing (31.4%), and dosing deviations (3.4%).
Aus dem Bericht nicht klassifizierbarAnteil an der Verlustzeit83,2 %Einfache Extraktion

Beobachtungseinheiten

  • Pellet mill (pelletizing line) · Formen, Gießen und Dosieren · Ausgangslage