foratvise
Loslegen
not classifiable

Unspecified production stoppage (pelletizing/forming)

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 2 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 59 % der Verlustzeit der Linie. Berichtet von 4 der 76 Studien, die sie beobachten konnten (begrenzte Evidenz).

Was passiert

The pelletizing or forming machine halts for a reason that the primary report does not describe beyond the generic term stoppage; the underlying trigger could be mechanical, material related or organisational but is not documented. Without a specific fault description the event cannot be attributed to a single physical mechanism.

Was man dagegen tut

Implement structured stop-reason entry in the SCADA or MES system so operators and technicians select a specific cause code at the moment of the stoppage, and audit records periodically to close gaps in reason logging. Train shift personnel on consistent downtime coding to enable future root cause analysis instead of generic stoppage entries.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
1,8 % [0,5–4,4 %]
Erwarteter Anteil an der Verlustzeit
1,1 % [0,3–2,7 %]
Anteil an der Verlustzeit bei Auftreten
59 % [48–69 %]
Studien / Einheiten
76 / 96
Evidenzgrad
C

Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    2,1 % [0,3–6,3 %]5 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    3,4 % [0,6–10,1 %]11 Studien
  • Bier, Wein und Spirituosen
    2,2 % [0,3–7,1 %]0 Studien
  • Backwaren und Teigwaren
    1,6 % [0,2–4,6 %]25 Studien
  • Fleisch, Geflügel und Fisch
    2,2 % [0,3–8,1 %]3 Studien
  • Obst- und Gemüseverarbeitung
    2,1 % [0,3–6,9 %]3 Studien
  • Getreide- und Ölsaatenmüllerei
    2,2 % [0,3–7,9 %]0 Studien
  • Zucker und Süßwaren
    1,9 % [0,3–5,9 %]8 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    2,7 % [0,4–8,8 %]7 Studien
  • Futtermittel und Heimtiernahrung
    2,8 % [0,4–9,0 %]6 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    2,0 % [0,3–6,6 %]8 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The pelletizing or forming machine halts for a reason that the primary report does not describe beyond the generic term stoppage; the underlying trigger could be mechanical, material related or organisational but is not documented. Without a specific fault description the event cannot be attributed to a single physical mechanism.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

The equipment state log shows a stopped or idle state with no associated fault code, alarm tag or reason description, and the downtime counter increments under a generic or blank category. Neighbouring upstream and downstream stations may show starvation or blocking without further diagnostic detail.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Implement structured stop-reason entry in the SCADA or MES system so operators and technicians select a specific cause code at the moment of the stoppage, and audit records periodically to close gaps in reason logging. Train shift personnel on consistent downtime coding to enable future root cause analysis instead of generic stoppage entries.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Anteil an der geplanten Zeit: 19,0 % · laut Bericht: “Equipment Failure Losses”
    Wörtliches Zitat anzeigen
    = 1942 10200 𝑥 100% = 19,039%
  2. Anteil an der geplanten Zeit: 39,3 % · laut Bericht: “Reduce Speed Losses”
    Wörtliches Zitat anzeigen
    = (0,032 −0,015)𝑥 235754 10200 𝑥 100% = 39,292%
  3. Anteil an der geplanten Zeit: 0,624 % · laut Bericht: “Defect Losses”
    Wörtliches Zitat anzeigen
    = 4246 𝑥 0,015 10200 𝑥 100% = 0,624%
  4. Verlustzeit: 91,4 hours · laut Bericht: “downtime”
    Wörtliches Zitat anzeigen
    This can reduce Filling 1 downtime from 393.78 hours to 67.62 hours and Blowing 1 from 91.35 hours to 14.75 hours.
  5. Verlustzeit: 156 menit · laut Bericht: “Downtime Terencana”
    Wörtliches Zitat anzeigen
    Rata - rata 2207238 2500000 5322 0,0030 156 470,75
  6. Verlustzeit: 471 menit · laut Bericht: “Downtime Tidak Terencana”
    Wörtliches Zitat anzeigen
    Rata - rata 2207238 2500000 5322 0,0030 156 470,75
  7. Anteil an der Verlustzeit: 83,2 % · laut Bericht: “production stoppages”
    Wörtliches Zitat anzeigen
    A diagnostic analysis revealed that 83.2% of the lost productive time is associated with production stoppages, mainly caused by mechanical failures due to the lack of preventive maintenance (48.4%), high levels of waste reprocessing (31.4%), and dosing deviations (3.4%).
  8. Verlustzeit: 0 min · laut Bericht: “Planned losses”
    Wörtliches Zitat anzeigen
    Planned losses (min) 0 160 0 0 0 160 7
  9. Verlustzeit: 278 min · laut Bericht: “Operational losses”
    Wörtliches Zitat anzeigen
    Operational losses (min) 278 494 106 53 157 1088 48
  10. Verlustzeit: 420 min · laut Bericht: “Equipment losses”
    Wörtliches Zitat anzeigen
    Equipment losses (min) 420 364 24 55 152 1015 44.8
  11. Verlustzeit: 698 min · laut Bericht: “Total Losses”
    Wörtliches Zitat anzeigen
    Total Losses(min) 698 1018 130 108 309 2263
  12. Anteil an der Verlustzeit: 30,8 % · laut Bericht: “Total Losses”
    Wörtliches Zitat anzeigen
    % of Losses 30.8 45 5.8 4.8 13.7