foratvise
Loslegen
Eingeschlossene Studie

Reducing Changeover Time Through SMED Methodology: A Review and Case Application in Beverage Bottling

Quelle öffnen

1Bibliografische Angaben

Autoren
Nishchay Selot -
Jahr
2026
Publikationsorgan
International Scientific Journal of Engineering and Management
Land
—
Segment
Milchprodukte
Prozessfamilie
Abfüll- und Verpackungslinie
Studientyp
Vorher-nachher-Intervention
Extraktionsumfang
Nur Abstract
Umfang
1 Werke · 1 Linien · — Maschinen
Beobachtungszeitraum
—
Datenerhebung
not_reported
Intervention
Umfeld laut Studie anzeigen
A primary case study applies SMED to a product changeover at a milk beverage bottling plant using Tetra Pak aseptic filling equipment.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 6Hohes Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
product changeoverTetra Pak aseptic filling equipment
Wörtliches Zitat anzeigen (Abstract)
The intervention reduced average changeover time from 40 minutes to approximately 28 minutes - a 30% reduction
Rüsten und EinstellenVerlustzeit28,0 minBeide Extraktionen übereinstimmend
product changeoverTetra Pak aseptic filling equipment
Wörtliches Zitat anzeigen (Abstract)
The intervention reduced average changeover time from 40 minutes to approximately 28 minutes - a 30% reduction
Rüsten und EinstellenVerlustzeit40,0 minBeide Extraktionen übereinstimmend

Beobachtungseinheiten

  • milk beverage bottling line (Tetra Pak aseptic filling) · Abfüllen · Nach der Intervention
  • milk beverage bottling line (Tetra Pak aseptic filling) · Abfüllen · Ausgangslage