foratvise
Loslegen
Eingeschlossene Studie

Integrating SMED and Mechanical Design for Changeover Reduction in Beverage Packaging Lines

Quelle öffnen

1Bibliografische Angaben

Autoren
António Rocha Esteves
Jahr
2026
Publikationsorgan
Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
DOI
—
Land
Portugal
Segment
Bier, Wein und Spirituosen
Prozessfamilie
Abfüll- und Verpackungslinie
Studientyp
Vorher-nachher-Intervention
Extraktionsumfang
Volltext
Umfang
1 Werke · 4 Linien · 2 Maschinen
Beobachtungszeitraum
731 Tage
Datenerhebung
manual_logs
Intervention
Umfeld laut Studie anzeigen
This dissertation, developed at the Super Bock Group's plant in Leça do Balio, addresses these losses on the Kisters and Mead secondary-packaging machines by combining the Single-Minute Exchange of Die (SMED) methodology with formal machine design

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 12Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
—
Wörtliches Zitat anzeigen (Section 1.1, Figure 1.2)
during 2025 production (annual OEE averaged 61.63%)
noneOEE61,6 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Section 1.1, Figure 1.1)
with an overall average of 58.8% (Figure 1.1)
noneOEE58,8 %Beide Extraktionen übereinstimmend
proactive retrieval of Format PartsKisters
Wörtliches Zitat anzeigen (Table 6.2)
Line 6 8 1.0/1.5 0.0 1.0/1.5
Rüsten und EinstellenVerlustzeit0 minBeide Extraktionen übereinstimmend
Breakdowns and Malfunctions Time (BMT)
Wörtliches Zitat anzeigen (Section 1.2)
Although breakdown and malfunction losses (18.04%) are greater in aggregate than changeover and ramp-up losses (≈7.2%), they are not the focus of this study.
Anlagenausfall (Störungen)Anteil an der geplanten Zeit18,0 %Einfache Extraktion
Changeover Time (COT) and Ramp-Up Time (RUT)
Wörtliches Zitat anzeigen (Section 1.2)
Although breakdown and malfunction losses (18.04%) are greater in aggregate than changeover and ramp-up losses (≈7.2%), they are not the focus of this study.
Rüsten und EinstellenAnteil an der geplanten Zeit7,20 %Einfache Extraktion
proactive retrieval of Format PartsKisters
Wörtliches Zitat anzeigen (Table 6.2)
Line 1 6 0.5 0.0 0.5
Rüsten und EinstellenVerlustzeit0,500 minEinfache Extraktion
proactive retrieval of Format PartsKisters
Wörtliches Zitat anzeigen (Table 6.2)
Line 1 6 0.5 0.0 0.5
Rüsten und EinstellenVerlustzeit0 minEinfache Extraktion
proactive retrieval of Format PartsKisters
Wörtliches Zitat anzeigen (Table 6.2)
Line 2 6 1.0 0.0 1.0
Rüsten und EinstellenVerlustzeit1,00 minEinfache Extraktion
proactive retrieval of Format PartsKisters
Wörtliches Zitat anzeigen (Table 6.2)
Line 2 6 1.0 0.0 1.0
Rüsten und EinstellenVerlustzeit0 minEinfache Extraktion
proactive retrieval of Format PartsKisters
Wörtliches Zitat anzeigen (Table 6.2)
Line 5 10 1.0 0.0 1.0
Rüsten und EinstellenVerlustzeit1,00 minEinfache Extraktion
proactive retrieval of Format PartsKisters
Wörtliches Zitat anzeigen (Table 6.2)
Line 5 10 1.0 0.0 1.0
Rüsten und EinstellenVerlustzeit0 minEinfache Extraktion
proactive retrieval of Format PartsKisters
Wörtliches Zitat anzeigen (Table 6.2)
Line 6 8 1.0/1.5 0.0 1.0/1.5
Rüsten und EinstellenVerlustzeit1,00 minEinfache Extraktion
Type A changeoverKisters
Wörtliches Zitat anzeigen (Table 6.4)
Type A 30.0, 33.0 (µ = 31.5) 24.0, 26.0 (µ = 25.0) 6.5 min 20.6%
Rüsten und EinstellenMittlere Ereignisdauer31,5 minEinfache Extraktion
Type B changeoverKisters
Wörtliches Zitat anzeigen (Table 6.4)
Type B 35.0, 28.0 (µ = 31.5) 26.0, 27.0 (µ = 26.5) 5.0 min 15.9%
Rüsten und EinstellenMittlere Ereignisdauer31,5 minEinfache Extraktion
Type C changeoverKisters
Wörtliches Zitat anzeigen (Table 6.4)
Type C 38.0, 49.0 (µ = 43.5) 35.0, 37.0 (µ = 37.5) 6.0 min 13.8%
Rüsten und EinstellenMittlere Ereignisdauer43,5 minEinfache Extraktion
Type D changeoverKisters
Wörtliches Zitat anzeigen (Table 6.4)
Type D 39.0, 39.0, 48.0 (µ = 42.0) 35.0, 35.0 (µ = 35.0) 7.0 min 16.7%
Rüsten und EinstellenMittlere Ereignisdauer42,0 minEinfache Extraktion
pooled all changeover types (A, B, C, D)Kisters
Wörtliches Zitat anzeigen (Section 6.4.2)
The pooled analysis shows a mean reduction from 37.7 to 30.6 minutes (18.7%), with a large effect size (Hedges’ g = 1.04).
Rüsten und EinstellenMittlere Ereignisdauer37,7 minEinfache Extraktion
Type A changeoverKisters
Wörtliches Zitat anzeigen (Table 6.4)
Type A 30.0, 33.0 (µ = 31.5) 24.0, 26.0 (µ = 25.0) 6.5 min 20.6%
Rüsten und EinstellenMittlere Ereignisdauer25,0 minEinfache Extraktion
Type B changeoverKisters
Wörtliches Zitat anzeigen (Table 6.4)
Type B 35.0, 28.0 (µ = 31.5) 26.0, 27.0 (µ = 26.5) 5.0 min 15.9%
Rüsten und EinstellenMittlere Ereignisdauer26,5 minEinfache Extraktion
Type C changeoverKisters
Wörtliches Zitat anzeigen (Table 6.4)
Type C 38.0, 49.0 (µ = 43.5) 35.0, 37.0 (µ = 37.5) 6.0 min 13.8%
Rüsten und EinstellenMittlere Ereignisdauer37,5 minEinfache Extraktion
Type D changeoverKisters
Wörtliches Zitat anzeigen (Table 6.4)
Type D 39.0, 39.0, 48.0 (µ = 42.0) 35.0, 35.0 (µ = 35.0) 7.0 min 16.7%
Rüsten und EinstellenMittlere Ereignisdauer35,0 minEinfache Extraktion
pooled all changeover types (A, B, C, D)Kisters
Wörtliches Zitat anzeigen (Section 6.4.2)
The pooled analysis shows a mean reduction from 37.7 to 30.6 minutes (18.7%), with a large effect size (Hedges’ g = 1.04).
Rüsten und EinstellenMittlere Ereignisdauer30,6 minEinfache Extraktion
Cardboard Module tuning stoppagesCardboard Cutout Feeding Module
Wörtliches Zitat anzeigen (Section 7.2, Figure 7.3)
Among the 29 changeovers interrupted for these reasons, 24 experienced multiple stoppages.
Rüsten und EinstellenAnzahl der Ereignisse29,0 changeoversEinfache Extraktion
Cardboard Module tuning stoppages (multiple stoppages)Cardboard Cutout Feeding Module
Wörtliches Zitat anzeigen (Section 7.2, Figure 7.3)
Among the 29 changeovers interrupted for these reasons, 24 experienced multiple stoppages.
Rüsten und EinstellenAnzahl der Ereignisse24,0 changeoversEinfache Extraktion
Cardboard Module fine-tuning (single stoppage)Cardboard Cutout Feeding Module
Wörtliches Zitat anzeigen (Section 7.2, Figure 7.4)
The median fine-tuning duration is 6 minutes for changeovers with a single stoppage, rising to 14 minutes for changeovers with two or more stoppages.
Rüsten und EinstellenMittlere Ereignisdauer6,00 minEinfache Extraktion
Cardboard Module fine-tuning (two or more stoppages)Cardboard Cutout Feeding Module
Wörtliches Zitat anzeigen (Section 7.2, Figure 7.4)
The median fine-tuning duration is 6 minutes for changeovers with a single stoppage, rising to 14 minutes for changeovers with two or more stoppages.
Rüsten und EinstellenMittlere Ereignisdauer14,0 minEinfache Extraktion
Folding Bracket Assembly Task (Redesigned Component)Kisters Folding Bracket Module
Wörtliches Zitat anzeigen (Abstract, page ii)
A redesigned tool-less folding bracket reduced its adjustment task time by 78.5% and its variance by 99.3% under statistically conclusive testing.
Rüsten und EinstellenMittlere Ereignisdauer78,5 % reductionEinfache Extraktion

Beobachtungseinheiten

  • Lines 1, 2, 5 and 6 (whole plant, SBG Leça do Balio) · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
  • Kisters - Line 6 (Format Parts Retrieval task) · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Nach der Intervention
  • Kisters - Line 1 (Format Parts Retrieval task) · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Ausgangslage
  • Kisters - Line 1 (Format Parts Retrieval task) · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Nach der Intervention
  • Kisters - Line 2 (Format Parts Retrieval task) · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Ausgangslage
  • Kisters - Line 2 (Format Parts Retrieval task) · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Nach der Intervention
  • Kisters - Line 5 (Format Parts Retrieval task) · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Ausgangslage
  • Kisters - Line 5 (Format Parts Retrieval task) · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Nach der Intervention
  • Kisters - Line 6 (Format Parts Retrieval task) · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Ausgangslage
  • Kisters - Line 1 (Adjustment Values / Slider Optimisation) · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Ausgangslage
  • Kisters - Line 1 (Adjustment Values / Slider Optimisation) · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Nach der Intervention
  • Kisters - Cardboard Cutout Feeding Module (observed changeovers, Feb-May 2026, all lines) · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Ausgangslage
  • Line 1 Kisters · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Nach der Intervention