Eingeschlossene Studie
Maintenance System Analysis Using the Total Productive Maintenance (TPM) Method
1Bibliografische Angaben
- Autoren
- Yusril Ananta, Bayu Ilham Pradana
- Jahr
- 2025
- Publikationsorgan
- Jurnal Management Risiko dan Keuangan
- DOI
- —
- Land
- Indonesia
- Segment
- Zucker und Süßwaren
- Prozessfamilie
- Mahlen, Extrahieren und Trennen
- Studientyp
- Einzelfallstudie
- Extraktionsumfang
- Nur Abstract
- Umfang
- 1 Werke · 1 Linien · — Maschinen
- Beobachtungszeitraum
- —
- Datenerhebung
- not_reported
- Intervention
Umfeld laut Studie anzeigen
This study aims to analyze the maintenance system of the mill station at PG Krebet Baru Unit of PT PG Rajawali I, evaluate its effectiveness, and provide recommendations for improving machinery and production equipment maintenance based on the Total Productive Maintenance (TPM) method.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 5Hohes Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
—mill stationWörtliches Zitat anzeigen (Abstract)The OEE value reached 98.53%, with availability at 99.17%, performance efficiency at 99.97%, and quality rate at 99.38%. | none | Qualität | 99,4 % | Beide Extraktionen übereinstimmend |
—mill stationWörtliches Zitat anzeigen (Abstract)The OEE value reached 98.53%, with availability at 99.17%, performance efficiency at 99.97%, and quality rate at 99.38%. | none | Leistung | 100,0 % | Beide Extraktionen übereinstimmend |
—mill stationWörtliches Zitat anzeigen (Abstract)The OEE value reached 98.53%, with availability at 99.17%, performance efficiency at 99.97%, and quality rate at 99.38%. | none | Verfügbarkeit | 99,2 % | Beide Extraktionen übereinstimmend |
—mill stationWörtliches Zitat anzeigen (Abstract)The OEE value reached 98.53%, with availability at 99.17%, performance efficiency at 99.97%, and quality rate at 99.38%. | none | OEE | 98,5 % | Beide Extraktionen übereinstimmend |
reduced speed lossesmill stationWörtliches Zitat anzeigen (Abstract)The Six Big Losses analysis indicates that the largest loss is reduced speed losses at 6.9%. | Verringerte Geschwindigkeit | Anteil an der Verlustzeit | 6,90 % | Beide Extraktionen übereinstimmend |
Beobachtungseinheiten
- Mill station · Mahlen und Zerkleinern · Ausgangslage

