foratvise
Loslegen
Verringerte Geschwindigkeit

Reduced speed loss (cause not specified)

Verringerte GeschwindigkeitLeistungGesamte Linie oder nicht spezifizierte Anlage

Die wissenschaftlichen Inhalte dieser Seite werden auf Englisch und Spanisch veröffentlicht; hier werden sie auf Englisch angezeigt.

Kurz gefasst

Sie tritt bei etwa 1 von 100 untersuchten Linien auf.

Wenn sie auftritt, entfällt auf sie im Mittel etwa 63 % der Verlustzeit der Linie. Berichtet von 4 der 127 Studien, die sie beobachten konnten (begrenzte Evidenz).

Was passiert

The equipment or line runs below its rated or ideal speed for a sustained period without the underlying physical or organisational reason being identified in the source report; the label simply records the OEE speed-loss category rather than a specific failure mode. Typical hidden drivers include conservative operator settings, minor mechanical wear, material handling constraints or upstream/downstream rate mismatches that are never broken down further.

Was man dagegen tut

Disaggregate the generic speed-loss figure by correlating speed trend data with shift, product, operator and upstream/downstream states to identify the dominant driver, then target it specifically (mechanical overhaul, parameter standardisation, line balancing). Establish and enforce a documented standard running speed per product/format so deviations trigger investigation rather than remaining unrecorded.

Praktische Hinweise auf Basis ingenieurtechnischen Wissens; keine statistische Schätzung.

1Wahrscheinlichkeit und Evidenz

Gepoolt über alle Segmente. Ein breites Intervall ist ein Ergebnis: Es zeigt, wie viel die Evidenz zu wissen erlaubt.
Auftretenswahrscheinlichkeit
1,2 % [0,3–2,8 %]
Erwarteter Anteil an der Verlustzeit
0,7 % [0,2–1,8 %]
Anteil an der Verlustzeit bei Auftreten
63 % [51–74 %]
Studien / Einheiten
127 / 161
Evidenzgrad
C

Grad C: 2 bis 4 Studien oder eine Intervallbreite über 0,35.

2Wahrscheinlichkeit nach Segment

Partiell gepoolte Schätzungen für jedes Branchensegment.
  • Milchprodukte
    1,2 % [0,2–4,0 %]13 Studien
  • Erfrischungsgetränke, abgefülltes Wasser und Säfte
    1,1 % [0,2–3,3 %]26 Studien
  • Bier, Wein und Spirituosen
    1,3 % [0,2–4,2 %]11 Studien
  • Backwaren und Teigwaren
    1,5 % [0,3–4,4 %]24 Studien
  • Fleisch, Geflügel und Fisch
    1,3 % [0,2–4,4 %]9 Studien
  • Obst- und Gemüseverarbeitung
    1,3 % [0,2–4,5 %]7 Studien
  • Getreide- und Ölsaatenmüllerei
    1,3 % [0,2–4,5 %]6 Studien
  • Zucker und Süßwaren
    1,2 % [0,2–4,0 %]9 Studien
  • Snacks, Kaffee, Tee und sonstige Lebensmittel
    1,3 % [0,2–4,3 %]5 Studien
  • Futtermittel und Heimtiernahrung
    1,3 % [0,2–4,3 %]7 Studien
  • Lebensmittelherstellung (nicht spezifiziert oder gemischt)
    2,8 % [0,4–9,0 %]10 Studien

3Mechanismus, SCADA-Signatur und Gegenmaßnahme

Ingenieurpraktische Hinweise, um die Ursache zu erkennen und zu beheben; nicht Teil der statistischen Schätzung.

Mechanismus

Ingenieurpraktische Hinweise

The equipment or line runs below its rated or ideal speed for a sustained period without the underlying physical or organisational reason being identified in the source report; the label simply records the OEE speed-loss category rather than a specific failure mode. Typical hidden drivers include conservative operator settings, minor mechanical wear, material handling constraints or upstream/downstream rate mismatches that are never broken down further.

So zeigt sie sich in SCADA-Daten

Ingenieurpraktische Hinweise

SCADA/MES shows the machine or line in running (automatic) state with no stop or fault alarm active, yet the instantaneous speed or cycle-time signal sits persistently below the programmed ideal rate, producing a gap between theoretical and actual output counters over the shift. No discrete micro-stop or blocking/starvation events accompany the deviation, so it appears as a continuous rate shortfall rather than discrete events.

Gegenmaßnahme

Ingenieurpraktische Hinweise

Disaggregate the generic speed-loss figure by correlating speed trend data with shift, product, operator and upstream/downstream states to identify the dominant driver, then target it specifically (mechanical overhaul, parameter standardisation, line balancing). Establish and enforce a documented standard running speed per product/format so deviations trigger investigation rather than remaining unrecorded.

4Quellen

Jeder extrahierte Datenpunkt mit Studie, Wert und wörtlichem Zitat.
  1. Anteil an der geplanten Zeit: 0 % · laut Bericht: “Reduced Speed Losses”
    Wörtliches Zitat anzeigen
    Rata-Rata 0,099271 9,29814 30,74813 0,00000 0,00000 0,13414
  2. Anteil an der Verlustzeit: 14,1 % · laut Bericht: “Reduce Speed Losses”
    Wörtliches Zitat anzeigen
    Reduce Speed Losses 4.490,67 14,07 3
  3. Verlustzeit: 4.491 min · laut Bericht: “Reduce Speed Losses”
    Wörtliches Zitat anzeigen
    Reduce Speed Losses 4.490,67 14,07 3
  4. Anteil an der Verlustzeit: 0 % · laut Bericht: “Reduced Speed Losses”
    Wörtliches Zitat anzeigen
    Rata-Rata 0,099271 9,29814 30,74813 0,00000 0,00000 0,13414
  5. Anteil an der geplanten Zeit: 33,6 % · laut Bericht: “reduced speed losses”
    Wörtliches Zitat anzeigen
    Pada mesin E dengan nilai efektivitas mesin terendah diketahui pada perhitungan six big losses terdapat dua losses yang paling dominan yaitu pada idling and minor stoppages losses dan reduced speed losses dengan nilai dari masing – masing losses adalah 48,95% dan 33,55%.
  6. Anteil an der Verlustzeit: 33,6 % · laut Bericht: “reduced speed losses”
    Wörtliches Zitat anzeigen
    pada perhitungan six big losses terdapat dua losses yang paling dominan yaitu pada idling and minor stoppages losses dan reduced speed losses dengan nilai dari masing – masing losses adalah 48,95% dan 33,55%
  7. Anteil an der Verlustzeit: 11,7 % · laut Bericht: “reduced speed losses”
    Wörtliches Zitat anzeigen
    Rata-rata kerugian yang terjadi pada setiap mesin yaitu breakdown losses 0,048%, setup and adjustment losses 0,159%, idle and minor stoppages 12,127%, dan reduced speed losses 11,749%.
  8. Anteil an der Verlustzeit: 0 % · laut Bericht: “Reduced Speed Losses”
    Wörtliches Zitat anzeigen
    Reduced Speed Losses 0 0 100
  9. Verlustzeit: 0 min · laut Bericht: “Reduced Speed Losses”
    Wörtliches Zitat anzeigen
    Reduced Speed Losses 0 0 100
  10. Anteil an den Verlustereignissen: 39,0 % · laut Bericht: “Reduce Speed Losses”
    Wörtliches Zitat anzeigen
    Reduce Speed Losses with an average proportion of 3.82% and a relative frequency of 39.01%, Downtime Losses with an average of 2.27% and a relative frequency of 28.31%, Defect Losses with an average of 1.58% and a relative frequency of 15.59%, Idle and Minor Stoppage with an average of 1.55% and a relative frequency of 15.85%.
  11. Anteil an der geplanten Zeit: 3,82 % · laut Bericht: “Reduce Speed Losses”
    Wörtliches Zitat anzeigen
    Reduce Speed Losses with an average proportion of 3.82% and a relative frequency of 39.01%, Downtime Losses with an average of 2.27% and a relative frequency of 28.31%, Defect Losses with an average of 1.58% and a relative frequency of 15.59%, Idle and Minor Stoppage with an average of 1.55% and a relative frequency of 15.85%.
  12. Verlustzeit: 6,30 jam · laut Bericht: “Reduced Speed Losses”
    Wörtliches Zitat anzeigen
    Reduced Speed Losses 6,30 45,53 90,14%
  13. Anteil an der geplanten Zeit: 12,4 % · laut Bericht: “Reduced speed losses”
    Wörtliches Zitat anzeigen
    𝑅𝑒𝑑𝑢𝑐𝑒𝑑 𝑠𝑝𝑒𝑒𝑑 𝑙𝑜𝑠𝑠𝑒𝑠𝑠= 12,386 %
  14. Anteil an der Verlustzeit: 24,7 % · laut Bericht: “reduced speed losses”
    Wörtliches Zitat anzeigen
    Analisis Six Big Losses mengidentifikasi bahwa total kerugian produksi mencapai 34,80%, dengan penyebab dominan berupa reduced speed losses sebesar 24,67%.
  15. Anteil an der Verlustzeit: 51,1 % · laut Bericht: “reduced speed losses”
    Wörtliches Zitat anzeigen
    Kerugian terbesar berasal dari reduced speed losses sebesar 51,09% dan idling and minor stoppages sebesar 10,53%.
  16. Anteil an der Verlustzeit: 6,90 % · laut Bericht: “reduced speed losses”
    Wörtliches Zitat anzeigen
    The Six Big Losses analysis indicates that the largest loss is reduced speed losses at 6.9%.