1Ficha bibliográfica
- Autores
- Diego Augusto de Jesús Pacheco, Giovana Di Giorgio Heidrich
- Año
- 2021
- Publicación
- Production Planning & Control
- País
- Brazil
- Segmento
- Refrescos, agua embotellada y jugos
- Familia de procesos
- Línea de llenado y envasado
- Tipo de estudio
- Intervención antes/después
- Alcance de la extracción
- Texto completo
- Tamaño
- 1 plantas · 1 líneas · 4 máquinas
- Periodo de observación
- 549 días
- Recolección de datos
- manual_logs
- Intervención
Ver el contexto tal como lo describe el estudio
The beverage company where the research was conducted has been operating in Brazil since 2013 with roughly 70 employees and a plant capacity of 50.000 hectoliters/month covering three bottling production lines, according to the type of products.
2Riesgo de sesgo
Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 12Riesgo moderado
| Ítem | Puntuación |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points. | 2 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Datos extraídos
Cada dato con su clasificación y la cita textual que lo establece.
| Causa reportada | Categoría de pérdida | Métrica | Valor | Extracción |
|---|---|---|---|---|
—Labelling machineVer cita textual (Section 4.2)These values are: Availability (Jul/16: 94.68%; Aug/2016: 94.72%; Sep/2016: 94.77%), Quality (Jul/16: 99.57%; Aug/2016: 99.60%; Sep/2016: 99.65%) and Performance (Jul/16: 99.80%; Aug/2016: 99.85%; Sep/2016: 99.87%). | none | Rendimiento | 99.9 % | Ambos extractores coincidieron |
—Labelling machineVer cita textual (Section 4.2)These values are: Availability (Jul/16: 94.68%; Aug/2016: 94.72%; Sep/2016: 94.77%), Quality (Jul/16: 99.57%; Aug/2016: 99.60%; Sep/2016: 99.65%) and Performance (Jul/16: 99.80%; Aug/2016: 99.85%; Sep/2016: 99.87%). | none | Calidad | 99.7 % | Ambos extractores coincidieron |
—Labelling machineVer cita textual (Section 4.2)These values are: Availability (Jul/16: 94.68%; Aug/2016: 94.72%; Sep/2016: 94.77%), Quality (Jul/16: 99.57%; Aug/2016: 99.60%; Sep/2016: 99.65%) and Performance (Jul/16: 99.80%; Aug/2016: 99.85%; Sep/2016: 99.87%). | none | Disponibilidad | 94.8 % | Ambos extractores coincidieron |
—Labelling machineVer cita textual (Section 4.2 / Fig. 6)Consequently, the OEE ratio of the labelling machine was improved by 33.8% (1-62.4/94.3), as displayed in Fig. 6. | none | OEE | 94.3 % | Ambos extractores coincidieron |
—Labelling machineVer cita textual (Section 4.2 / Fig. 6)Consequently, the OEE ratio of the labelling machine was improved by 33.8% (1-62.4/94.3), as displayed in Fig. 6. | none | OEE | 62.4 % | Ambos extractores coincidieron |
—Labelling machineVer cita textual (Section 4.2 / Fig. 5)The outcome analysis showed improvements in Availability rate of approximately 19% (1-76.8/94.8), Performance of 12.7% (1-87.2/99.9) and Quality of 6.5% (1-93.2/99.7). | none | Calidad | 93.2 % | Ambos extractores coincidieron |
—Labelling machineVer cita textual (Section 4.2 / Fig. 5)The outcome analysis showed improvements in Availability rate of approximately 19% (1-76.8/94.8), Performance of 12.7% (1-87.2/99.9) and Quality of 6.5% (1-93.2/99.7). | none | Rendimiento | 87.2 % | Ambos extractores coincidieron |
—Labelling machineVer cita textual (Section 4.2 / Fig. 5)The outcome analysis showed improvements in Availability rate of approximately 19% (1-76.8/94.8), Performance of 12.7% (1-87.2/99.9) and Quality of 6.5% (1-93.2/99.7). | none | Disponibilidad | 76.8 % | Ambos extractores coincidieron |
—Ver cita textual (Section 4.2 / Fig. 7)The data collection outcomes (Fig. 7) showed that the line’s OEE obtained an actual improvement of approximately 17% (1-72.3/87.5). | none | OEE | 87.5 % | Ambos extractores coincidieron |
—Ver cita textual (Section 4.2 / Fig. 7)The data collection outcomes (Fig. 7) showed that the line’s OEE obtained an actual improvement of approximately 17% (1-72.3/87.5). | none | OEE | 72.3 % | Ambos extractores coincidieron |
—Ver cita textual (Table 2)Indicator Jul. Aug. Sept. Oct. Nov. Dec. Availability 71% 68% 72% 79% 74% 72% Performance 26% 30% 26% 20% 24% 26% Quality 3% 2% 2% 1% 2% 2% | none | Disponibilidad | 71.0 % | Un solo extractor |
—Ver cita textual (Table 2)Indicator Jul. Aug. Sept. Oct. Nov. Dec. Availability 71% 68% 72% 79% 74% 72% Performance 26% 30% 26% 20% 24% 26% Quality 3% 2% 2% 1% 2% 2% | none | Disponibilidad | 68.0 % | Un solo extractor |
—Ver cita textual (Table 2)Indicator Jul. Aug. Sept. Oct. Nov. Dec. Availability 71% 68% 72% 79% 74% 72% Performance 26% 30% 26% 20% 24% 26% Quality 3% 2% 2% 1% 2% 2% | none | Disponibilidad | 72.0 % | Un solo extractor |
—Ver cita textual (Table 2)Indicator Jul. Aug. Sept. Oct. Nov. Dec. Availability 71% 68% 72% 79% 74% 72% Performance 26% 30% 26% 20% 24% 26% Quality 3% 2% 2% 1% 2% 2% | none | Disponibilidad | 79.0 % | Un solo extractor |
—Ver cita textual (Table 2)Indicator Jul. Aug. Sept. Oct. Nov. Dec. Availability 71% 68% 72% 79% 74% 72% Performance 26% 30% 26% 20% 24% 26% Quality 3% 2% 2% 1% 2% 2% | none | Disponibilidad | 74.0 % | Un solo extractor |
—Ver cita textual (Table 2)Indicator Jul. Aug. Sept. Oct. Nov. Dec. Availability 71% 68% 72% 79% 74% 72% Performance 26% 30% 26% 20% 24% 26% Quality 3% 2% 2% 1% 2% 2% | none | Rendimiento | 26.0 % | Un solo extractor |
—Ver cita textual (Table 2)Indicator Jul. Aug. Sept. Oct. Nov. Dec. Availability 71% 68% 72% 79% 74% 72% Performance 26% 30% 26% 20% 24% 26% Quality 3% 2% 2% 1% 2% 2% | none | Rendimiento | 30.0 % | Un solo extractor |
—Ver cita textual (Table 2)Indicator Jul. Aug. Sept. Oct. Nov. Dec. Availability 71% 68% 72% 79% 74% 72% Performance 26% 30% 26% 20% 24% 26% Quality 3% 2% 2% 1% 2% 2% | none | Rendimiento | 20.0 % | Un solo extractor |
—Ver cita textual (Table 2)Indicator Jul. Aug. Sept. Oct. Nov. Dec. Availability 71% 68% 72% 79% 74% 72% Performance 26% 30% 26% 20% 24% 26% Quality 3% 2% 2% 1% 2% 2% | none | Rendimiento | 24.0 % | Un solo extractor |
—Ver cita textual (Table 2)Indicator Jul. Aug. Sept. Oct. Nov. Dec. Availability 71% 68% 72% 79% 74% 72% Performance 26% 30% 26% 20% 24% 26% Quality 3% 2% 2% 1% 2% 2% | none | Calidad | 3.00 % | Un solo extractor |
—Ver cita textual (Table 2)Indicator Jul. Aug. Sept. Oct. Nov. Dec. Availability 71% 68% 72% 79% 74% 72% Performance 26% 30% 26% 20% 24% 26% Quality 3% 2% 2% 1% 2% 2% | none | Calidad | 2.00 % | Un solo extractor |
—Ver cita textual (Table 2)Indicator Jul. Aug. Sept. Oct. Nov. Dec. Availability 71% 68% 72% 79% 74% 72% Performance 26% 30% 26% 20% 24% 26% Quality 3% 2% 2% 1% 2% 2% | none | Calidad | 1.00 % | Un solo extractor |
setup lossesVer cita textual (Section 3.1 / Fig. 3)Considering the same period of time analysed, the setup losses constitute 107.5 hours and the setting losses approximately 93.2 hours. | Setups y ajustes | Tiempo perdido | 108 h | Un solo extractor |
setting lossesVer cita textual (Section 3.1 / Fig. 3)Considering the same period of time analysed, the setup losses constitute 107.5 hours and the setting losses approximately 93.2 hours. | Setups y ajustes | Tiempo perdido | 93.2 h | Un solo extractor |
setup operationVer cita textual (Section 4.2)Before the intervention, the time to conclude a setup operation was approximately 156 minutes. After the intervention, it was reduced to approximately 104 minutes. | Setups y ajustes | Duración media del evento | 156 min | Un solo extractor |
—Ver cita textual (Section 4.2)Considering that the production line performs an average of 8 setups operations per month and that the productive capacity of the labelling machine is, on average, 7.000 units/hour | Setups y ajustes | Número de eventos | 8.00 events/month | Un solo extractor |
—Ver cita textual (Section 4.3)The size of the production lots for the manufactured products of the line (510 ml bottles and 1.500 ml bottles with/without gas) before the intervention was on average 161.450 units/month | none | Capacidad de producción | 161,450 units/month | Un solo extractor |
setup operationVer cita textual (Section 4.2)Before the intervention, the time to conclude a setup operation was approximately 156 minutes. After the intervention, it was reduced to approximately 104 minutes. | Setups y ajustes | Duración media del evento | 104 min | Un solo extractor |
—Ver cita textual (Section 4.3)while after the intervention and stabilisation of the new work processes implemented, the outcomes achieved a more economical production of small batch sizes, decreased to an average of 89.512 units/month | none | Capacidad de producción | 89,512 units/month | Un solo extractor |
Setup timeLabelling machineVer cita textual (Table 3)Blowing machine Filling machine Labelling machine (bottleneck resource) Packaging machine 85 minutes 69 minutes 148 minutes 97 minutes 57 minutes 73 minutes 0 minutes 51 minutes | Setups y ajustes | Duración media del evento | 148 min | Un solo extractor |
Idle timeLabelling machineVer cita textual (Table 3)Blowing machine Filling machine Labelling machine (bottleneck resource) Packaging machine 85 minutes 69 minutes 148 minutes 97 minutes 57 minutes 73 minutes 0 minutes 51 minutes | Microparos y esperas | Duración media del evento | 0 min | Un solo extractor |
equipment setupLabelling machineVer cita textual (Section 4.1 / Fig. 4)In short, our results showed that before the method made its mark, the equipment setup averaged 148 minutes, and after the implementation, the setup time decreased to two digits, approximately 19 minutes (Fig. 4). | Setups y ajustes | Duración media del evento | 148 min | Un solo extractor |
equipment setupLabelling machineVer cita textual (Section 4.1 / Fig. 4)In short, our results showed that before the method made its mark, the equipment setup averaged 148 minutes, and after the implementation, the setup time decreased to two digits, approximately 19 minutes (Fig. 4). | Setups y ajustes | Duración media del evento | 19.0 min | Un solo extractor |
—Labelling machineVer cita textual (Section 4.2 / Fig. 5)The outcome analysis showed improvements in Availability rate of approximately 19% (1-76.8/94.8), Performance of 12.7% (1-87.2/99.9) and Quality of 6.5% (1-93.2/99.7). | none | Disponibilidad | 94.8 % | Un solo extractor |
—Labelling machineVer cita textual (Section 4.2 / Fig. 5)The outcome analysis showed improvements in Availability rate of approximately 19% (1-76.8/94.8), Performance of 12.7% (1-87.2/99.9) and Quality of 6.5% (1-93.2/99.7). | none | Rendimiento | 99.9 % | Un solo extractor |
—Labelling machineVer cita textual (Section 4.2 / Fig. 5)The outcome analysis showed improvements in Availability rate of approximately 19% (1-76.8/94.8), Performance of 12.7% (1-87.2/99.9) and Quality of 6.5% (1-93.2/99.7). | none | Calidad | 99.7 % | Un solo extractor |
—Labelling machineVer cita textual (Section 4.2)These values are: Availability (Jul/16: 94.68%; Aug/2016: 94.72%; Sep/2016: 94.77%), Quality (Jul/16: 99.57%; Aug/2016: 99.60%; Sep/2016: 99.65%) and Performance (Jul/16: 99.80%; Aug/2016: 99.85%; Sep/2016: 99.87%). | none | Disponibilidad | 94.7 % | Un solo extractor |
—Labelling machineVer cita textual (Section 4.2)These values are: Availability (Jul/16: 94.68%; Aug/2016: 94.72%; Sep/2016: 94.77%), Quality (Jul/16: 99.57%; Aug/2016: 99.60%; Sep/2016: 99.65%) and Performance (Jul/16: 99.80%; Aug/2016: 99.85%; Sep/2016: 99.87%). | none | Disponibilidad | 94.7 % | Un solo extractor |
—Labelling machineVer cita textual (Section 4.2)These values are: Availability (Jul/16: 94.68%; Aug/2016: 94.72%; Sep/2016: 94.77%), Quality (Jul/16: 99.57%; Aug/2016: 99.60%; Sep/2016: 99.65%) and Performance (Jul/16: 99.80%; Aug/2016: 99.85%; Sep/2016: 99.87%). | none | Calidad | 99.6 % | Un solo extractor |
—Labelling machineVer cita textual (Section 4.2)These values are: Availability (Jul/16: 94.68%; Aug/2016: 94.72%; Sep/2016: 94.77%), Quality (Jul/16: 99.57%; Aug/2016: 99.60%; Sep/2016: 99.65%) and Performance (Jul/16: 99.80%; Aug/2016: 99.85%; Sep/2016: 99.87%). | none | Calidad | 99.6 % | Un solo extractor |
—Labelling machineVer cita textual (Section 4.2)These values are: Availability (Jul/16: 94.68%; Aug/2016: 94.72%; Sep/2016: 94.77%), Quality (Jul/16: 99.57%; Aug/2016: 99.60%; Sep/2016: 99.65%) and Performance (Jul/16: 99.80%; Aug/2016: 99.85%; Sep/2016: 99.87%). | none | Rendimiento | 99.8 % | Un solo extractor |
—Labelling machineVer cita textual (Section 4.2)These values are: Availability (Jul/16: 94.68%; Aug/2016: 94.72%; Sep/2016: 94.77%), Quality (Jul/16: 99.57%; Aug/2016: 99.60%; Sep/2016: 99.65%) and Performance (Jul/16: 99.80%; Aug/2016: 99.85%; Sep/2016: 99.87%). | none | Rendimiento | 99.9 % | Un solo extractor |
Setup timeBlowing machineVer cita textual (Table 3)Blowing machine Filling machine Labelling machine (bottleneck resource) Packaging machine 85 minutes 69 minutes 148 minutes 97 minutes 57 minutes 73 minutes 0 minutes 51 minutes | Setups y ajustes | Duración media del evento | 85.0 min | Un solo extractor |
Idle timeBlowing machineVer cita textual (Table 3)Blowing machine Filling machine Labelling machine (bottleneck resource) Packaging machine 85 minutes 69 minutes 148 minutes 97 minutes 57 minutes 73 minutes 0 minutes 51 minutes | Microparos y esperas | Duración media del evento | 57.0 min | Un solo extractor |
Setup timeFilling machineVer cita textual (Table 3)Blowing machine Filling machine Labelling machine (bottleneck resource) Packaging machine 85 minutes 69 minutes 148 minutes 97 minutes 57 minutes 73 minutes 0 minutes 51 minutes | Setups y ajustes | Duración media del evento | 69.0 min | Un solo extractor |
Idle timeFilling machineVer cita textual (Table 3)Blowing machine Filling machine Labelling machine (bottleneck resource) Packaging machine 85 minutes 69 minutes 148 minutes 97 minutes 57 minutes 73 minutes 0 minutes 51 minutes | Microparos y esperas | Duración media del evento | 73.0 min | Un solo extractor |
Setup timePackaging machineVer cita textual (Table 3)Blowing machine Filling machine Labelling machine (bottleneck resource) Packaging machine 85 minutes 69 minutes 148 minutes 97 minutes 57 minutes 73 minutes 0 minutes 51 minutes | Setups y ajustes | Duración media del evento | 97.0 min | Un solo extractor |
Idle timePackaging machineVer cita textual (Table 3)Blowing machine Filling machine Labelling machine (bottleneck resource) Packaging machine 85 minutes 69 minutes 148 minutes 97 minutes 57 minutes 73 minutes 0 minutes 51 minutes | Microparos y esperas | Duración media del evento | 51.0 min | Un solo extractor |
—labelling machineVer cita textual (Page 18, Table 3 and text)The observations revealed that the labelling machine is the equipment with the longest setup time in the line, totalling 156 (148 + 8) minutes. | Setups y ajustes | Tiempo perdido | 148 min | Un solo extractor |
—labelling machineVer cita textual (Page 26)our results showed that before the method made its mark, the equipment setup averaged 148 minutes, and after the implementation, the setup time decreased to two digits, approximately 19 minutes | Setups y ajustes | Tiempo perdido | 19.0 min | Un solo extractor |
Unidades de observación
- Labelling machine · Etiquetado y codificado · Después de la intervención
- Labelling machine · Etiquetado y codificado · Línea base
- Production line 3 · Línea completa o equipo sin especificar · Después de la intervención
- Production line 3 · Línea completa o equipo sin especificar · Línea base
- Blowing machine · Formado, moldeado y dosificado · Línea base
- Filling machine · Llenado · Línea base
- Packaging machine · Envasado (formado, sellado, envoltura, encajado, paletizado) · Línea base

