foratvise
Comenzar
Estudio incluido

Lean-TPM Production Model for Efficiency and Quality Enhancement in the Brewing Industry: Insights from a Peruvian Case Study

Abrir fuente

1Ficha bibliográfica

Autores
Jofre Alfredo Cerna-Arribasplata, Andre Moises Rivas-Atauchi, Elmer Luis Tupia De La Cruz
Año
2025
Publicación
International Journal of Recent Engineering Science
País
Peru
Segmento
Cerveza, vino y destilados
Familia de procesos
Línea de llenado y envasado
Tipo de estudio
Intervención antes/después
Alcance de la extracción
Texto completo
Tamaño
1 plantas · 1 líneas · — máquinas
Periodo de observación
120 días
Recolección de datos
not_reported
Intervención
Ver el contexto tal como lo describe el estudio
This company specializes in the production of canned beer, focusing on two main product presentations, 355 ml and 473 ml.

2Riesgo de sesgo

Puntuado con la rúbrica del protocolo: 2 preocupación baja, 1 algunas preocupaciones, 0 preocupación alta.
Puntuación total 9Riesgo moderado
ÍtemPuntuación
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given.1 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points.2 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Datos extraídos

Cada dato con su clasificación y la cita textual que lo establece.
Causa reportadaCategoría de pérdidaMétricaValorExtracción
—
Ver cita textual (Section 4.4 Results)
The defective product rate showed a remarkable improvement of 56%, reducing from 2.97% to 1.30%, confirming the positive impact of the model on final product quality.
Defectos de proceso (desecho y reproceso)Tasa de defectos1.30 %Ambos extractores coincidieron
—
Ver cita textual (Section 4.4 Results)
The defective product rate showed a remarkable improvement of 56%, reducing from 2.97% to 1.30%, confirming the positive impact of the model on final product quality.
Defectos de proceso (desecho y reproceso)Tasa de defectos2.97 %Ambos extractores coincidieron
downtime
Ver cita textual (Section 4.4 Results)
Likewise, downtime decreased by 72%, dropping from 74 to 21 minutes, demonstrating greater operational availability of the equipment.
No clasificable a partir del reporteTiempo perdido21.0 minAmbos extractores coincidieron
downtime
Ver cita textual (Section 4.4 Results)
Likewise, downtime decreased by 72%, dropping from 74 to 21 minutes, demonstrating greater operational availability of the equipment.
No clasificable a partir del reporteTiempo perdido74.0 minAmbos extractores coincidieron
setup time
Ver cita textual (Section 4.4 Results)
Setup time experienced a notable improvement, decreasing by 29%, from 41 to 29 minutes, reflecting substantial optimization in process efficiency.
Setups y ajustesDuración media del evento41.0 minUn solo extractor
rework caused by errors in the sealing process
Ver cita textual (Section 4.2 Initial Diagnosis)
This inefficiency was attributed to three main factors: rework, accounting for 13.95% of the issue, was caused by errors in the sealing process.
Defectos de proceso (desecho y reproceso)Proporción del tiempo perdido14.0 %Un solo extractor
errors in operational development
Ver cita textual (Section 4.2 Initial Diagnosis)
Errors in operational development, representing 39.20%, were linked to two root causes: cans failing to meet the required filling level, highlighting the need for systems such as Andon, and technical machinery failures, which accounted for 27.01%
No clasificable a partir del reporteProporción del tiempo perdido39.2 %Un solo extractor
technical machinery failures
Ver cita textual (Section 4.2 Initial Diagnosis)
technical machinery failures, which accounted for 27.01% and could be mitigated through autonomous maintenance based on 5S principles within a TPM framework.
Fallas de equipo (averías)Proporción del tiempo perdido27.0 %Un solo extractor
process stoppages due to machinery
Ver cita textual (Section 4.2 Initial Diagnosis)
Lastly, process stoppages due to machinery were the most significant factor, with an impact of 46.85%, stemming from extended equipment setup times, which represented 19.84%, suggesting the implementation of the SMED methodology to reduce these delays.
No clasificable a partir del reporteProporción del tiempo perdido46.9 %Un solo extractor
extended equipment setup times
Ver cita textual (Section 4.2 Initial Diagnosis)
Lastly, process stoppages due to machinery were the most significant factor, with an impact of 46.85%, stemming from extended equipment setup times, which represented 19.84%, suggesting the implementation of the SMED methodology to reduce these delays.
Setups y ajustesProporción del tiempo perdido19.8 %Un solo extractor
setup time
Ver cita textual (Section 4.4 Results)
Setup time experienced a notable improvement, decreasing by 29%, from 41 to 29 minutes, reflecting substantial optimization in process efficiency.
Setups y ajustesDuración media del evento29.0 minUn solo extractor
—
Ver cita textual (Section 4.4)
Setup time experienced a notable improvement, decreasing by 29%, from 41 to 29 minutes, reflecting substantial optimization in process efficiency.
Setups y ajustesTiempo perdido41.0 minUn solo extractor
—
Ver cita textual (Section 4.4)
Setup time experienced a notable improvement, decreasing by 29%, from 41 to 29 minutes, reflecting substantial optimization in process efficiency.
Setups y ajustesTiempo perdido29.0 minUn solo extractor

Unidades de observación

  • Canning line · Envasado (formado, sellado, envoltura, encajado, paletizado) · Después de la intervención
  • Canning line · Envasado (formado, sellado, envoltura, encajado, paletizado) · Línea base