Avería de la máquina empacadora
En resumen
Aparece en cerca de 4 de cada 100 líneas estudiadas.
Cuando aparece, se lleva en promedio cerca del 58 % del tiempo perdido de la línea. La reportan 15 de los 112 estudios que podían observarla (evidencia sólida).
Qué pasa
Un componente mecánico, eléctrico, neumático o de control de la empacadora, encajonadora o equipo de envoltura se degrada o falla por completo (piezas desgastadas, elementos de transmisión rotos, fallos de sensores o actuadores), interrumpiendo la función de empaque hasta que un técnico lo repara o reemplaza. Al requerir intervención de mantenimiento y no un simple reinicio del operador, la parada se clasifica como avería y no como paro menor.
Qué se hace
Implementar mantenimiento preventivo y basado en condición sobre accionamientos, rodamientos, sellos y sensores de la línea de empaque, con monitoreo de vibración o desgaste para anticipar la falla. Mantener repuestos críticos en planta, estandarizar procedimientos rápidos de diagnóstico y reparación de fallos, y realizar análisis de causa raíz en averías recurrentes para rediseñar componentes débiles.
Orientación práctica basada en conocimiento de ingeniería; no es una estimación estadística.
1Probabilidad y evidencia
- Probabilidad de presencia
- 4.4 % [1.9–8.4 %]
- Proporción esperada del tiempo perdido
- 2.6 % [1.1–4.8 %]
- Proporción del tiempo perdido cuando está presente
- 58 % [49–66 %]
- Estudios / unidades
- 112 / 155
- Grado de evidencia
- A
Grado A: 10 o más estudios y 10 o más líneas distintas, con un intervalo de credibilidad del 95 % de ancho menor a 0,20.
2Probabilidad por segmento
- Productos lácteos3.8 % [0.8–9.9 %]14 estudios
- Refrescos, agua embotellada y jugos4.0 % [1.2–8.3 %]33 estudios
- Cerveza, vino y destilados7.7 % [2.3–17.2 %]14 estudios
- Panadería y pastas6.2 % [1.4–16.9 %]6 estudios
- Carne, aves y pescado6.1 % [1.3–16.1 %]6 estudios
- Procesamiento de frutas y vegetales4.6 % [0.9–12.9 %]4 estudios
- Molienda de granos y oleaginosas6.4 % [1.3–17.9 %]4 estudios
- Azúcar y confitería4.6 % [0.9–13.1 %]4 estudios
- Snacks, café, té y otros alimentos5.3 % [1.3–13.3 %]8 estudios
- Alimento animal y para mascotas4.5 % [0.8–12.1 %]5 estudios
- Manufactura de alimentos (sin especificar o mixta)8.1 % [2.4–18.1 %]14 estudios
3Mecanismo, firma en SCADA y contramedida
Mecanismo
Guía de ingenieríaUn componente mecánico, eléctrico, neumático o de control de la empacadora, encajonadora o equipo de envoltura se degrada o falla por completo (piezas desgastadas, elementos de transmisión rotos, fallos de sensores o actuadores), interrumpiendo la función de empaque hasta que un técnico lo repara o reemplaza. Al requerir intervención de mantenimiento y no un simple reinicio del operador, la parada se clasifica como avería y no como paro menor.
Cómo se ve en los datos de SCADA
Guía de ingenieríaEl estado de la máquina pasa de marcha a fallo/parada con una duración que suele superar el umbral de paro menor, acompañado de un código de alarma específico del PLC de la empacadora (sobrecarga de motor, fallo de sensor, enclavamiento de seguridad). El contador de tiempo de inactividad del activo de empaque se acumula bajo un código de razón de avería de equipo, mientras los transportadores de acumulación aguas arriba se llenan y los de aguas abajo se vacían, visibles como estados de bloqueo/inanición en las máquinas vecinas.
Contramedida
Guía de ingenieríaImplementar mantenimiento preventivo y basado en condición sobre accionamientos, rodamientos, sellos y sensores de la línea de empaque, con monitoreo de vibración o desgaste para anticipar la falla. Mantener repuestos críticos en planta, estandarizar procedimientos rápidos de diagnóstico y reparación de fallos, y realizar análisis de causa raíz en averías recurrentes para rediseñar componentes débiles.
4Fuentes
- Tiempo perdido: 155 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
- Tiempo perdido: 118 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
- Tiempo perdido: 158 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
- Tiempo perdido: 265 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
- Tiempo perdido: 129 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
- Tiempo perdido: 322 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
- Tiempo perdido: 166 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
- Tiempo perdido: 286 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
- Tiempo perdido: 364 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
- Tiempo perdido: 216 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
- EFFECT OF EQUIPMENT MAINTENANCE ON THE PERFORMANCE EVALUATION OF FOOD AND BEVERAGE MANUFACTURING INDUSTRIES IN NIGERIA. (2023)Abrir fuenteTiempo perdido: 216 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
- EFFECT OF EQUIPMENT MAINTENANCE ON THE PERFORMANCE EVALUATION OF FOOD AND BEVERAGE MANUFACTURING INDUSTRIES IN NIGERIA. (2023)Abrir fuenteTiempo perdido: 322 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
- EFFECT OF EQUIPMENT MAINTENANCE ON THE PERFORMANCE EVALUATION OF FOOD AND BEVERAGE MANUFACTURING INDUSTRIES IN NIGERIA. (2023)Abrir fuenteTiempo perdido: 158 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
- EFFECT OF EQUIPMENT MAINTENANCE ON THE PERFORMANCE EVALUATION OF FOOD AND BEVERAGE MANUFACTURING INDUSTRIES IN NIGERIA. (2023)Abrir fuenteTiempo perdido: 155 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
- EFFECT OF EQUIPMENT MAINTENANCE ON THE PERFORMANCE EVALUATION OF FOOD AND BEVERAGE MANUFACTURING INDUSTRIES IN NIGERIA. (2023)Abrir fuenteTiempo perdido: 364 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
- EFFECT OF EQUIPMENT MAINTENANCE ON THE PERFORMANCE EVALUATION OF FOOD AND BEVERAGE MANUFACTURING INDUSTRIES IN NIGERIA. (2023)Abrir fuenteTiempo perdido: 129 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
- EFFECT OF EQUIPMENT MAINTENANCE ON THE PERFORMANCE EVALUATION OF FOOD AND BEVERAGE MANUFACTURING INDUSTRIES IN NIGERIA. (2023)Abrir fuenteTiempo perdido: 286 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
- EFFECT OF EQUIPMENT MAINTENANCE ON THE PERFORMANCE EVALUATION OF FOOD AND BEVERAGE MANUFACTURING INDUSTRIES IN NIGERIA. (2023)Abrir fuenteTiempo perdido: 166 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 321.5 165.8 285.5 364.3 216
- EFFECT OF EQUIPMENT MAINTENANCE ON THE PERFORMANCE EVALUATION OF FOOD AND BEVERAGE MANUFACTURING INDUSTRIES IN NIGERIA. (2023)Abrir fuenteTiempo perdido: 265 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
- EFFECT OF EQUIPMENT MAINTENANCE ON THE PERFORMANCE EVALUATION OF FOOD AND BEVERAGE MANUFACTURING INDUSTRIES IN NIGERIA. (2023)Abrir fuenteTiempo perdido: 118 h · según el reporte: “breakdown”
Ver cita textual
Total number hours of breakdown per year(hours) 154.5 117.66 158.3 264.5 128.6
- ANALISIS PERHITUNGAN OVERALL EQUIPMENT EFFECTIVENESS (OEE) PADA MESIN PACKING UNTUK MENINGKATKAN NILAI AVAILABILITY MESIN (2014)Abrir fuenteTiempo perdido: 2,255 min · según el reporte: “Breakdown”
Ver cita textual
Breakdown 2,255 56%
- ANALISIS PERHITUNGAN OVERALL EQUIPMENT EFFECTIVENESS (OEE) PADA MESIN PACKING UNTUK MENINGKATKAN NILAI AVAILABILITY MESIN (2014)Abrir fuenteTiempo perdido: 1,498 min · según el reporte: “Setup after breakdown”
Ver cita textual
Setting setelah breakdown 1,498 100%
- ANALISIS PENGUKURAN NILAI OVERALL EQUIPMENT EFFECTIVENESS (OEE) PADA PROSES PACKAGING DI LINE 2 (STUDI KASUS PT. MULTI BINTANG INDONESIA. TBK) (2016)Abrir fuenteTiempo perdido: 6,105 menit · según el reporte: “Breakdown”
Ver cita textual
Total 6105 129243 61,33
- ANALISIS PENGUKURAN NILAI OVERALL EQUIPMENT EFFECTIVENESS (OEE) PADA PROSES PACKAGING DI LINE 2 (STUDI KASUS PT. MULTI BINTANG INDONESIA. TBK) (2016)Abrir fuenteProporción del tiempo planificado: 5.72 % · según el reporte: “Breakdown”
Ver cita textual
Rata-rata 469,62 941,77 5,72
- Use of packing equipment efficiency as an estimate of the overall plant effectiveness and as a tool to improve financial results of a food-processing unit (2017)Abrir fuenteProporción del tiempo perdido: 6.00 % · según el reporte: “automation failures”
Ver cita textual
A deeper analysis of non-scheduled maintenance data (Figure 9) shows that major causes of packing equipment failure are related to: electrical failures (26%), unscheduled operational (26%) or mechanical (23%) adjustments, worn parts or equipment breakdown (13%) and automation failures (6%).
- Use of packing equipment efficiency as an estimate of the overall plant effectiveness and as a tool to improve financial results of a food-processing unit (2017)Abrir fuenteProporción del tiempo perdido: 13.0 % · según el reporte: “worn parts or equipment breakdown”
Ver cita textual
A deeper analysis of non-scheduled maintenance data (Figure 9) shows that major causes of packing equipment failure are related to: electrical failures (26%), unscheduled operational (26%) or mechanical (23%) adjustments, worn parts or equipment breakdown (13%) and automation failures (6%).
- Use of packing equipment efficiency as an estimate of the overall plant effectiveness and as a tool to improve financial results of a food-processing unit (2017)Abrir fuenteProporción del tiempo perdido: 26.0 % · según el reporte: “electrical failures”
Ver cita textual
A deeper analysis of non-scheduled maintenance data (Figure 9) shows that major causes of packing equipment failure are related to: electrical failures (26%), unscheduled operational (26%) or mechanical (23%) adjustments, worn parts or equipment breakdown (13%) and automation failures (6%).
- Use of packing equipment efficiency as an estimate of the overall plant effectiveness and as a tool to improve financial results of a food-processing unit (2017)Abrir fuenteProporción del tiempo perdido: 22.0 % · según el reporte: “packaging failure”
Ver cita textual
Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
- Use of packing equipment efficiency as an estimate of the overall plant effectiveness and as a tool to improve financial results of a food-processing unit (2017)Abrir fuenteTiempo perdido: 11,079 min · según el reporte: “packaging failure”
Ver cita textual
Major Availability losses were categorized as: non-scheduled maintenance (29,010 min. - 58% of Availability losses); packaging failure (11,079 min. - 22%); lack of demand that are downstream losses (8,260 min. - 13%) and; lack of product input to the packing line (952 min. – 2%).
- Study on Preventive Maintenance Strategies of Filling Equipment Based on Reliability-Cantered Maintenance (2021)Abrir fuenteTiempo perdido: 220 min · según el reporte: “PM2”
Ver cita textual
Total 2540 485 500 560 450 265 225 240 220 5485 224940 2.44%
- Study on Preventive Maintenance Strategies of Filling Equipment Based on Reliability-Cantered Maintenance (2021)Abrir fuenteTiempo perdido: 225 min · según el reporte: “PM1”
Ver cita textual
Total 2540 485 500 560 450 265 225 240 220 5485 224940 2.44%
- Study on Preventive Maintenance Strategies of Filling Equipment Based on Reliability-Cantered Maintenance (2021)Abrir fuenteNúmero de eventos: 11.0 events · según el reporte: “PM1”
Ver cita textual
Total 61 21 24 22 17 7 11 10 8 181
- Study on Preventive Maintenance Strategies of Filling Equipment Based on Reliability-Cantered Maintenance (2021)Abrir fuenteNúmero de eventos: 8.00 events · según el reporte: “PM2”
Ver cita textual
Total 61 21 24 22 17 7 11 10 8 181
- Proporción del tiempo perdido: 0.450 % · según el reporte: “Breakdown”
Ver cita textual
Breakdown 0.45% 0.94% 0.38%
- Proporción del tiempo perdido: 0.380 % · según el reporte: “Breakdown”
Ver cita textual
Breakdown 0.45% 0.94% 0.38%
- Penerapan Metode Overall Equipment Effectiveness (OEE) dan Six Big Losses untuk Mengukur Efektivitas Mesin Packing pada PT. Surya Tsabat Mandiri (2023)Abrir fuenteProporción del tiempo planificado: 1.27 % · según el reporte: “Breakdown”
Ver cita textual
4 Breakdown 1,27 4,04 98,66
- Penerapan Metode Overall Equipment Effectiveness (OEE) dan Six Big Losses untuk Mengukur Efektivitas Mesin Packing pada PT. Surya Tsabat Mandiri (2023)Abrir fuenteProporción del tiempo perdido: 4.04 % · según el reporte: “Breakdown”
Ver cita textual
4 Breakdown 1,27 4,04 98,66
- Application of Total Productive Maintenance (TPM) and 5'S to increase the availability of a ham packaging line of a food company (2024)Abrir fuenteTiempo perdido: 13,590 min · según el reporte: “fallas”
Ver cita textual
el tiempo total disponible fue de 71 588 minutos, con un tiempo de parada acumulado de 13 590 minutos y un total de 249 fallas.
- Application of Total Productive Maintenance (TPM) and 5'S to increase the availability of a ham packaging line of a food company (2024)Abrir fuenteNúmero de eventos: 249 events · según el reporte: “fallas”
Ver cita textual
el tiempo total disponible fue de 71 588 minutos, con un tiempo de parada acumulado de 13 590 minutos y un total de 249 fallas.
- Application of Total Productive Maintenance (TPM) and 5'S to increase the availability of a ham packaging line of a food company (2024)Abrir fuenteTiempo entre eventos: 233 min · según el reporte: “fallas”
Ver cita textual
El MTBF promedio durante este período fue de 232.92 minutos, mientras que el MTTR fue de 54.58 minutos.
- Application of Total Productive Maintenance (TPM) and 5'S to increase the availability of a ham packaging line of a food company (2024)Abrir fuenteDuración media del evento: 54.6 min · según el reporte: “fallas”
Ver cita textual
El MTBF promedio durante este período fue de 232.92 minutos, mientras que el MTTR fue de 54.58 minutos.
- Application of Total Productive Maintenance (TPM) and 5'S to increase the availability of a ham packaging line of a food company (2024)Abrir fuenteTiempo perdido: 5,671 min · según el reporte: “fallas”
Ver cita textual
mostrando que el tiempo disponible fue de 47 290 minutos con un tiempo de parada de 5671 minutos y 110 fallas
- Application of Total Productive Maintenance (TPM) and 5'S to increase the availability of a ham packaging line of a food company (2024)Abrir fuenteNúmero de eventos: 110 events · según el reporte: “fallas”
Ver cita textual
mostrando que el tiempo disponible fue de 47 290 minutos con un tiempo de parada de 5671 minutos y 110 fallas
- Application of Total Productive Maintenance (TPM) and 5'S to increase the availability of a ham packaging line of a food company (2024)Abrir fuenteTiempo entre eventos: 378 min · según el reporte: “fallas”
Ver cita textual
obteniendo un MTBF promedio de 378.36 minutos (Visualizar Fig. 7), un MTTR promedio de 51.55 minutos
- Application of Total Productive Maintenance (TPM) and 5'S to increase the availability of a ham packaging line of a food company (2024)Abrir fuenteDuración media del evento: 51.6 min · según el reporte: “fallas”
Ver cita textual
obteniendo un MTBF promedio de 378.36 minutos (Visualizar Fig. 7), un MTTR promedio de 51.55 minutos
- Lean-TPM Production Model for Efficiency and Quality Enhancement in the Brewing Industry: Insights from a Peruvian Case Study (2025)Abrir fuenteProporción del tiempo perdido: 27.0 % · según el reporte: “technical machinery failures”
Ver cita textual
technical machinery failures, which accounted for 27.01% and could be mitigated through autonomous maintenance based on 5S principles within a TPM framework.
- Aggregate Analysis of Packaging Machine Effectiveness Using the OEE Method at PT. XYZ (2025)Abrir fuenteProporción del tiempo perdido: 50.0 % · según el reporte: “Equipment Failure Losses”
Ver cita textual
Equipment Failure Losses 20.205 20.205 50% 50%
- Aggregate Analysis of Packaging Machine Effectiveness Using the OEE Method at PT. XYZ (2025)Abrir fuenteTiempo perdido: 20,205 Minutes · según el reporte: “Equipment Failure Losses”
Ver cita textual
Equipment Failure Losses 20.205 20.205 50% 50%
- Productivity Improvement in a Bakery and Pastry Premix Company by Applying Preventive Maintenance, SMED and 5´S (2026)Abrir fuenteTiempo entre eventos: 22.6 h · según el reporte: “mechanical failure (corrective intervention)”
Ver cita textual
The baseline Mean Time Between Failures (MTBF) was 22.61 hours with a standard deviation of 10.91 hours; average corrective intervention time was 11.69 hours (see Table 4).
- Productivity Improvement in a Bakery and Pastry Premix Company by Applying Preventive Maintenance, SMED and 5´S (2026)Abrir fuenteDuración media del evento: 11.7 h · según el reporte: “mechanical failure (corrective intervention)”
Ver cita textual
The baseline Mean Time Between Failures (MTBF) was 22.61 hours with a standard deviation of 10.91 hours; average corrective intervention time was 11.69 hours (see Table 4).
- Productivity Improvement in a Bakery and Pastry Premix Company by Applying Preventive Maintenance, SMED and 5´S (2026)Abrir fuenteTiempo entre eventos: 32.0 h · según el reporte: “mechanical failure”
Ver cita textual
on the 3rd of that month, 32 hours of operation were recorded until intervention, while on the 29th of the same month, only 6.25 hours were reached before maintenance was required.
- Productivity Improvement in a Bakery and Pastry Premix Company by Applying Preventive Maintenance, SMED and 5´S (2026)Abrir fuenteTiempo entre eventos: 6.25 h · según el reporte: “mechanical failure”
Ver cita textual
on the 3rd of that month, 32 hours of operation were recorded until intervention, while on the 29th of the same month, only 6.25 hours were reached before maintenance was required.
- Analisis Overall Equipment Effectiveness dan Six Big Losses pada Mesin Packaging Makanan di PT XYZ (2026)Abrir fuenteTiempo perdido: 83.0 Jam · según el reporte: “Breakdown Losses”
Ver cita textual
Kegagalan karena Breakdown Losses 83,03 31,45 Sangat Tinggi
- Analisis Overall Equipment Effectiveness dan Six Big Losses pada Mesin Packaging Makanan di PT XYZ (2026)Abrir fuenteProporción del tiempo perdido: 31.5 % · según el reporte: “Breakdown Losses”
Ver cita textual
diketahui bahwa faktor kegagalan berasal dari Breakdown Losses sebesar 31,45%, Reduced Speed Losses sebesar 24,73%, dan Idling and Minor Stoppages sebesar 18,64%.
- Proposal to Improve the Operational Availability of the Canning Machine in a Craft Brewery through the Application of Work Study, SMED, and Planned Maintenance (2026)Abrir fuenteTiempo entre eventos: 117 h · según el reporte: “mechanical failure”
Ver cita textual
Furthermore, the mechanical MTBF increased from 98.74 h to 117.25 h, while the electrical MTBF increased from 144.31 h to 170.55 h.
- Proposal to Improve the Operational Availability of the Canning Machine in a Craft Brewery through the Application of Work Study, SMED, and Planned Maintenance (2026)Abrir fuenteDuración media del evento: 7.50 h · según el reporte: “mechanical failure”
Ver cita textual
the mechanical MTTR decreased from 9.73 h to 7.50 h
- Proposal to Improve the Operational Availability of the Canning Machine in a Craft Brewery through the Application of Work Study, SMED, and Planned Maintenance (2026)Abrir fuenteTiempo entre eventos: 98.7 h · según el reporte: “mechanical failure”
Ver cita textual
Furthermore, the mechanical MTBF increased from 98.74 h to 117.25 h, while the electrical MTBF increased from 144.31 h to 170.55 h.
- Proposal to Improve the Operational Availability of the Canning Machine in a Craft Brewery through the Application of Work Study, SMED, and Planned Maintenance (2026)Abrir fuenteDuración media del evento: 9.73 h · según el reporte: “mechanical failure”
Ver cita textual
the mechanical MTTR decreased from 9.73 h to 7.50 h
- Integrasi OEE–Pareto–FMEA–Ishikawa untuk Peningkatan Efektivitas Mesin dan Mutu Kemasan Kecap Pouch 550 mL: Integrated OEE–Pareto–FMEA–Ishikawa Approach for Improving Machine Effectiveness and Packaging Quality of 550 mL Soy Sauce Pouch (2026)Abrir fuenteProporción del tiempo perdido: 25.0 % · según el reporte: “Breakdown loss”
Ver cita textual
Breakdown loss 25

